Modern Xiaomi devices greatly simplify the creation of a comfortable microclimate in the apartment, but the initial configuration of gadgets on the iOS operating system often raises questions among users. The main difficulty lies not in the process of pairing, but in the right choice of region and network settings, without which smart technology simply will not detect your smartphone. Unlike Android devices, iPhones have stricter requirements for LAN permissions, which often causes scanning errors. QR-code.
In this detailed guide, we will take a look at all the steps of integrating a humidifier into the Mi Home ecosystem, focusing on the nuances of working with servers and Wi-Fi protocols. You will learn why a device may not be seen in search and how to correctly change the application region to activate all the management functions.
Before you get to the software part, make sure the humidifier itself is physically ready to go.This is a basic requirement that many beginners forget when trying to plug in an empty tank or device without a lid installed.Most Xiaomi humidifier models have protection from running without water or an open lid, so they won't go into pairing mode until they're assembled correctly. Check for water in the tank and make sure the power indicator on the case responds to pressing.
Preparation of equipment and Wi-Fi network
The foundation of successful connectivity is a stable network connection. Xiaomi smart devices, including air humidifiers, operate exclusively in the 2.4 GHz frequency range. If your router broadcasts a 5 GHz network or uses a combined name for both bands, it may be difficult to identify the gadget. It is recommended to temporarily separate the networks in the router settings or make sure that the smartphone is connected to 2.4 GHz.
Also critical is the status of the Mi Home app itself. Before starting the procedure, make sure you have the latest version of the app installed from the App Store. Older versions may not contain profiles for new humidifier models or have bugs in iOS security protocols. In addition, the iPhone operating system must be updated to the current version to avoid conflicts with new permission requirements.
⚠️ Warning: Make sure your iPhone is Bluetooth enabled and geolocated. In newer versions of iOS, without permission to access geolocation, the app will not be able to scan devices located nearby, even if they are running over Wi-Fi.
Don't forget to check the battery power of your smartphone. The setup process can take time, especially if you need to update the device's firmware immediately after you connect. A depleted phone in the middle of the process can cause an initialization error, after which you will have to start the procedure again. Connect the charger if the charge level is below 20%.
Setting up the Mi Home app and selecting a region
The most common stumbling block is the wrong choice of region when you first launch an application. Xiaomi servers are geographically separated, and devices purchased for one market (for example, China or the Global version) may not show up if the account is linked to another region.
If you've previously created an account but you've chosen the wrong region, you'll either have to change it in your profile settings or create a new one. If you change region, your device list in the app will clear up, but this is necessary for the new technology to work properly. Go to profile, click on Settings and select Region. In the list that opens, find the country that matches your technology.
Once you select a region, the app may require re-authorization, which is a normal procedure for synchronizing data with a new server, make sure you use the same phone number or email you planned to use to permanently manage your smart home, and if you have multiple accounts, carefully check which login is logged in.
💡
If you don’t know which region to choose, look at the device pack or instruction: it often lists the country code or the server domain name (e.g. miio.ru or mi-home.com).
The process of adding a device to the system
After the preparatory steps, you can go directly to pairing. Open the Mi Home app and make sure you're in the main tab. In the upper right corner of the screen, click on the plus (+) icon. The app will start scanning devices via Bluetooth. If the humidifier is in pairing mode (Wi-Fi indicator flashes), it should appear in the list automatically.
If automatic detection fails, use manual search. At the top of the screen, there is a search bar where you can type in the model name (such as ZHIMI or Deerma) or simply the word "humidifier." Select your model from the drop-down list. Next, ask the system to confirm that the indicator on the device is flashing. Click "Yes" or "Next".
☑️ Checklist before connection
The next step is to enter your Wi-Fi password, which is usually automatically set up by the system, but if that doesn't happen, enter it manually, following the character register, and the data transfer process will begin after the confirmation, at which point don't turn off your smartphone screen or go to other applications, so as not to interrupt the exchange of data packets between the phone and the humidifier.
Solving the visibility problems of the device
Often, users are faced with a situation where the phone simply “can’t see” the humidifier, despite all the correct settings. One of the main reasons is the privacy settings of iOS. Apple’s system strictly controls the access of applications to the local network. If you accidentally denied access on the first run, Mi Home will not be able to detect the devices in your Wi-Fi.
To fix this, go to the iPhone Settings itself, scroll down to the Mi Home app and make sure the Local Network switch is activated (burns green).Without this permission, all connection attempts are doomed to failure, as iOS blocks the app's broadcast requests.
Another reason could be the use of complex Wi-Fi passwords with special characters or spaces. Some modules in budget models of humidifiers incorrectly handle such characters. Try temporarily changing the router password to make it easier (only letters and numbers), connect the device, and then return the complex combination back to the settings stored in the memory of the gadget.
| Problem. | Probable cause | Method of decision |
|---|---|---|
| No device found. | Local area network down. | Enable in iOS settings for Mi Home |
| Time-out error | Weak Wi-Fi signal | Get closer to the router or humidifier |
| The wrong region | Server doesn't have a device | Change the region in the Mi Home profile |
| 99% failure. | IP Address Conflict | Reboot the router and humidifier |
⚠️ Note: If the Wi-Fi indicator on the humidifier is constantly on, and not flashing, then the device is already someone tuned or got stuck. 5-7 seconds.
Updating the firmware and setting up scenarios
After successfully adding a humidifier to the list of devices, the Mi Home app will likely offer to update the firmware. Ignore this step: new versions of the software often contain connection errors and improve the algorithms of the humidity sensors. Click on the update notification and wait for the process to be completed without turning the humidifier off the socket.
Once the update is complete, you can adjust the target humidity, fan speed and operating modes (e.g., night or automatic). A particularly useful feature is creating automation scenarios, such as setting the humidifier on when the temperature sensor detects the air conditioner, or turning off when you open a window (if you have a smart opening sensor).
Why do I need to update my firmware immediately?
To create a script, go to the Smart Scenarios tab at the bottom of the screen and click Create. Select a condition (like time or sensor reading) and an action (turn on humidifier, set humidity 50%) that turns a regular appliance into a full-fledged part of a smart home that works without your intervention.
Additional functions and voice management
Xiaomi's ecosystem allows you to integrate the humidifier with voice assistants. If you use Siri via HomeKit (a gateway or compatible device is required) or voice control inside the Mi Home app itself, you can turn on the device with a command. To activate voice control, go to the settings of a particular device and find Voice Control or Add to Siri.
You should also pay attention to the notification settings, and you can set the app alerts that you've run out of water or need to change the filter/cartridge, which eliminates the need to constantly check the fluid level visually, and adjusting these thresholds helps maintain the hygiene of the device and prolongs its life.
💡
Integration with voice assistants and the creation of automatic scripts is a key advantage of a smart humidifier over a regular one, allowing you to completely forget about manual control.
Remember to check the app's performance statistics periodically, and you can see how many hours the humidifier worked and how much water was used over a period, and these data are useful for understanding the performance of the appliance in your particular room and for planning replacement supplies.