How to turn Bluetooth on Xiaomi 365 Pro: step-by-step configuration

Owners of the popular IP-The Xiaomi Mijia 360 Pro’s security cameras often face an unobvious moment when you first install the device. Unlike smartphones or tablets, this model does not have the usual switch in the menu interface that would allow you to instantly activate the wireless module. Bluetooth is used here exclusively for the fast pairing stage, after which the camera switches to a Wi-Fi connection to transmit a video stream.

Many users mistakenly believe that the Bluetooth feature on the camera must be running constantly to transmit data, which is a misconception. In fact, the BLE (Bluetooth Low Energy) protocol is only needed when a device pairs with the Mi Home app on your phone. If you don't know how to start this process correctly, the camera can stay in standby mode for a long time, flashing an indicator, but never appearing on the list of available devices.

It is important to understand that “turning on” Bluetooth on the Xiaomi 365 Pro is not a one-time setting inside the system, but a physical action or sequence of steps that depends on the current state of the gadget. The hardware module activates automatically when you reset your settings or when you first turn on, waiting for a signal from your smartphone. In this article, we will discuss all the nuances of activation and connection so that you can quickly set up video surveillance in your home.

The principle of operation of the Bluetooth module in the camera Xiaomi

The Xiaomi Mijia 360 Pro’s data technology is built on a hybrid circuit. The Bluetooth 4.0 wireless module (or higher, depending on the board revision) serves as a “key” that transfers credentials from your router directly to the camera’s memory, which saves the user from having to enter complex passwords manually through the smartphone screen, which is especially inconvenient when using a virtual keyboard.

After successfully transferring Wi-Fi settings, the camera automatically disables the active search mode for Bluetooth devices to save energy and reduce radio interference. That is why it is not provided for the device to re-enable Bluetooth for normal use (for example, for file transfer or headphone connection).

⚠️ Warning: Don't try to find the camera in your phone's general list of Bluetooth devices for permanent communication. Once set up, it disappears from there, switching to Wi-Fi-only mode.

If you plan to move your camera to another room with a new router, you'll have to re-initiate what we call "Bluetooth powering on," which is done through a software reset, which we'll talk about in the next sections, and understanding this logic of how the communication protocol works helps you avoid a lot of errors in operation.

Preparation of the smartphone and the Mi Home application

Before you try to activate a camera search, you need to make sure that your smartphone is properly configured. Often the problem lies not in the camera Xiaomi 365 Pro, and in the permissions that the user did not provide the application Mi Home. Android and iOS operating systems require explicit permission to access geolocation and Bluetooth to work with the smart home.

Make sure the following services are enabled on your phone:

• 📍 Geolocation (GPS): A mandatory parameter for Android, without which scanning of Bluetooth devices is blocked at the system level.
• 🔵 Bluetooth: Must be active and visible to other devices.
• 📶 Wi-Fi: The phone must be connected to a 2.4GHz network (Xiaomi cameras do not support 5GHz at the setup stage).

It is also critical to check the app version: Go to the app store (Google Play or App Store) and make sure you have the latest version of Mi Home installed. Older versions may not properly handle the new encryption protocols that the security camera uses. If the app is installed long ago, it is better to delete it and download it again to eliminate cache errors.

Another important point is the region in the app. When you first run the Mi Home asks you to choose a country. For Xiaomi devices purchased in the CIS or Europe, the "Russia" or "Germany" region is usually the right one. If you choose the wrong region, the server may not see the device, even if the Bluetooth on the camera is active, a common mistake that confuses many users.

Activate Bluetooth through resetting camera settings

If the camera was previously connected to another router or you just can't find it, you have to force pairing. On the Xiaomi Mijia 360 Pro there is no separate "Bluetooth" button, but there is a reset button that puts the device in standby mode, which is the analogue of "on" the wireless module.

To do this, you'll need a thin object, like a paper clip or a toothpick, on the camera case, next to the microSD card jack and the slot for the microSD card. SIM-cards (if any) 4G The version, but the Pro version is usually Wi-Fi only, has a small hole inside it, and there's a Reset button.

The procedure is as follows:

1. Connect the camera to the power source (the adapter must be original or have a current of at least 2A).
2. Wait until the status indicator lights up in yellow or orange.
3. Press and hold the reset button inside the hole for 5-10 seconds.
4. Release the button when you hear a voice message in English or Chinese, or when the indicator starts flashing.

Once the camera emits an audible signal and the indicator starts flashing, the Bluetooth module goes into visibility mode. You have a limited time (usually a few minutes) to open the application and find the device. If you don't have time, the camera will go into sleep mode, and the procedure will have to be repeated. This is done for security reasons, so that outsiders can not intercept the signal.

The process of pairing through the Mi Home application

Now that the camera is in standby mode, we'll move to setting up via your smartphone. Open the Mi Home app and make sure you're in the main tab. In the upper right corner, click on the + icon. The app will trigger automatic scanning of the space.

If Bluetooth is on correctly, a pop-up window with your Xiaomi 365 Pro camera should appear at the top of the screen. Click on it. If automatic detection fails, search for "Mi Home Security Camera 360° 1080P" or "Pro."

Follow the instructions on the screen:

• 🏠 Select a room: Assign a camera to a specific room (such as "Living Room"), this will help with grouping.
• 📶 Enter your Wi-Fi password: The app will match the password from the network the phone is connected to.
• 🔊 Audio confirmation: The app may offer to make the sound that the camera counts to confirm the connection, or simply transmit data via Bluetooth.

⚠️ Attention: During the setup process, keep your smartphone at a distance of no more 50-70 A weak Bluetooth signal can interrupt the transmission of encryption keys, and the setting will fail.

After the successful transfer of data, the indicator on the camera will change color to blue (or green, depending on the version of the software), which means a successful connection to Wi-Fi. From now on, the Bluetooth module performs only background functions and no longer requires your intervention to transfer video.

Table of Bluetooth and Wi-Fi status indicators

Understanding color indication helps diagnose problems during the Bluetooth turn on phase: Xiaomi 365 Pro communicates with the user via LED blinking. Below is a transcript of the main modes of operation.

If the indicator is on orange and doesn't flash, then the camera is on, but not in setup mode, in which case a forced reset with the Reset button is the only way to activate Bluetooth again for the connection.