How to properly throw out garbage from the robot vacuum cleaner Xiaomi: instructions with photos and tips

Xiaomi’s robot vacuum cleaners have become indispensable cleaning aids, but their effectiveness depends on timely maintenance. One key is cleaning the trash can properly. Many users make mistakes in extracting and disposing of the collected garbage, leading to reduced suction power, unpleasant odors, or even device breakdowns.

In this article, we will discuss how to safely remove and dispose of garbage from the container of the Xiaomi robot vacuum cleaner (including popular models Mi Robot Vacuum, Roborock, Dreame, etc.), You will learn about the cleaning frequency, the tools necessary, as well as about the typical errors that shorten the life of the device.

Why it is important to clean the garbage container properly

The garbage container of a robot vacuum cleaner is not just a dust tank, it has a direct impact on:

• 🌀 Suction performance – a clogged filter or overcrowded container reduces power by 30-50%.
• 🦠 Hygiene – debris and moisture become a medium for the reproduction of bacteria and mold.
• 🔋 Lifetime – dust enters the engine and electronics, accelerating wear and tear.
• 👃 Smell – organic waste (hair, wool, crumbs) begin to rot already through 1-2 day-day.

According to Xiaomi service centers, up to 40% of complaints about “low traction” or “extraneous noise” are related to improper cleaning of the container. S7 and DreameBot L10s The Ultra system of automatic cleaning of the tank requires a special approach - if you do not monitor its condition, the robot can begin to "spit" garbage back to the floor.

⚠️ Warning: Never shake the container over the trash can to shake off the dust.Small particles can get into the air intake holes and damage the turbine.

Preparation for cleaning: what will be needed

Before you start removing garbage, prepare the following tools and materials:

• 🧹 Soft brush with a long pile (for example, a makeup brush or a brush for cleaning lenses).
• 🧴 Wet wipes without alcohol or microfibre fabric.
• 🗑️ A high-sided garbage bucket (so that the dust does not fly away).
• 🔌 Vacuum cleaner with a narrow nozzle (optional, for deep cleaning).
• 🧼 Soap or dishwashing agent (for models with wet cleaning function).

For models with automatic tank cleaning system (e.g. Roborock) S7 MaxV Ultra or DreameBot X30 Ultra additional requirements:

• 🔧 Screwdriver (to remove the protective grille, if provided by the design).
• 💧 Distilled water (for washing the container for dirty water).

If your robot vacuum cleaner is equipped HEPA-Filters, prepare a spare or check if you can wash the existing filter (in most Xiaomi models, filters are disposable and require replacement every time). 2-3 month).

Step-by-step: how to throw garbage out of the container

The cleaning algorithm depends on the type of container, and below is a universal method that is suitable for most Xiaomi, Roborock and Dreame models.

1. Removal of the container

Turn off the robot vacuum cleaner (or put it to sleep if there is no power button). Click on the latch of the container (usually located on the top or back panel) and gently pull the container over yourself. S7 And the newer container can be fixed with a magnet - do not make excessive efforts.

Disposal of garbage

Move the container over the trash can and:

1. Open the container lid (click on the button or move the latch).
2. Turn the container in a smooth motion so that the debris falls out under the influence of gravity.
3. Use a brush to remove dust from the interior walls and filter (if it is removable).

For models with automatic cleaning station (e.g. DreameBot) X30 Ultra):

• 📦 Remove the container from the station by pressing the lever from the side.
• 🔄 Disconnect the container for dirty water (if any) and drain its contents into the sink.
• 🧽 Wash the container with warm water and soap, then dry.

Turned off the robot vacuum cleaner from the socket (if it is on charge)

Prepared a trash can with high sides

Checked if there are sharp objects in the container (clips, nails)

Disconnected the water container (for models with wet cleaning)-->

Cleaning of filters

Filters (usually located inside or on the lid) require special attention.

• 🌬️ Pre-filter (grid): rinse under running water and dry for 24 hours.
• 🧹 HEPA-filter: wipe with a dry brush or replace it (if disposable).

In Roborock models S8 Pro Ultra and DreameBot L20 Ultra uses dual filtering system – be sure to clean both filters.

⚠️ Warning: Never use compressed air (such as a canister) to clean filters.A jet of air can damage microfibers HEPA-filter, reducing its efficiency to 40%.

4.Assembly and inspect

After cleaning:

1. Make sure all the elements are dry (especially filters).
2. Install the container back before clicking (the characteristic fixation sound should be heard).
3. Run a test cleaning on the 1-2 minutes to check the traction.

💡

If the robot vacuum cleaner makes a whistling sound after cleaning, check if the filter is installed correctly. The whistle indicates that the air is sucked through the loose fit.

How often should the container be cleaned?

The frequency of cleaning depends on the intensity of use and type of garbage.

For models with self-cleaning function (e.g. DreameBot) X30 Ultra: Manufacturer recommends cleaning the main container once in a while 1-2 But if you're using it in a very dusty environment, like during repairs, you should increase the frequency.

💡

Even if the robot vacuum cleaner is equipped with automatic cleaning function of the tank, the container still requires manual washing at least 1 time per month.

Common Mistakes and How to Avoid Them

Many users make mistakes that cause breakdowns or reduce cleaning efficiency, and here are the most common:

• 🚫 Using a vacuum cleaner to clean the container - a powerful flow of air can damage seals or filters.
• 🚫 Washing containers in a dishwasher – high temperatures deform plastic, especially in models with electronic sensors (e.g. Roborock) S7 MaxV).
• 🚫 Ignoring sensor cleaning – dust on infrared sensors causes the robot to go blind and collide with furniture.
• 🚫 Storing a robot with a full container – this leads to the compression of garbage and makes it difficult to remove it in the future.

In Roborock models S6 And what's newer is, when the container is full, the robot automatically stops cleaning and it gives an E5 or E6 error. If you ignore this warning, the engine can overheat.

Another common problem is that the turbine gets hammered with hair, and if the robot starts to hum or vibrate, check not only the container, but also the brush (which must be cleaned separately, removing the protective cover).

Features of cleaning for models with wet cleaning

Xiaomi Robot Vacuum Cleaners with Wet Cleaning Function (e.g. Roborock) S7, DreameBot W10, Mi Robot Vacuum-Mop 2 Pro requires additional maintenance, and in addition to dry containers, they have a special special specialty:

• 💧 Clean water container – it must be washed after each use.
• 🧽 Dumpster for dirty water - requires cleaning from the residues of detergent and garbage.
• 🧼 The squirrel must be washed or replaced every time. 1-2 weekdays.

Instructions for cleaning the wet cleaning system:

1. Pour the remaining water from both containers.
2. Wash the dirty water container with warm water and soap (do not use aggressive detergents!).
3. Wipe the container contacts with a dry wipe - oxidation can lead to errors such as "E3" (no connection to the base).
4. Remove the mope nozzle and rinse it under running water. You can soak it in vinegar solution for disinfection (1:10) on 10-15 minute.

⚠️ Attention: In Roborock models S7 and DreameBot L10s Ultra can't be used with bleach or chlorine, and it breaks down sealing gums and can cause water to leak.

If a robot has started leaving divorces on the floor, it is a sign that:

• The water supply nozzles are clogged (need to be cleaned with a needle).
• The sleeve is worn out (replacement is required).
• In a container for clean water, a too concentrated detergent is used.

How to extend the life of the container and filters

Following a few simple rules will help to avoid premature wear:

• 🔄 Regular replacement of filters — HEPA-The filters in Xiaomi models are designed for 2-3 Even if they look clean, their effectiveness is reduced.
• 🧴 Use of special means - vacuum cleaners sprays can be used to clean the container (for example, Kärcher They kill bacteria and eliminate odors.
• ☀️ Proper drying – after washing, the container and filters must dry for at least 24 hours.
• 📱 Firmware Update – Newer versions of Roborock and Dreame often improve container cleaning algorithms (e.g., add filter replacement reminders).

For carbon filter models (e.g. Mi Robot Vacuum) 1S) If the robot begins to smell like a burn, it is a sign that the carbon filter has exhausted its life and needs to be replaced.

If you use a robot vacuum cleaner in conditions of high dust content (for example, during repairs), it is recommended to:

• Reduce the cleaning interval of the container to each cycle.
• Set maximum power mode in the settings to reduce the load on the filters.
• After repair, disassemble the robot and blow all ducts with compressed air (carefully!).

FAQ: Frequent questions about cleaning the container