Xiaomi’s robot vacuum cleaners are some of the most popular smart cleaning devices, but their standard voice alerts in Chinese or English are often uncomfortable for Russian users. Installing a Russian-language voice package not only makes interaction with the device more intuitive, but also allows you to better control the cleaning processes, understanding statuses and errors. However, many owners face difficulties: where to download current files, how to download them correctly, and why the voice may not work after installation?
In this article, we will look at all the steps from checking the compatibility of your model to solving typical problems after installation, focusing on the robot vacuum cleaners of the Mi Robot, Dreame and Viomi series, because the algorithms for them are different, and you will also learn how to return the original voice if the experiment with Russification was unsuccessful.
1. Compatibility: Which Xiaomi models support changing voice packet
Not all Xiaomi robot vacuum cleaners allow you to replace voice alerts, depending on the firmware, hardware platform and version of the Mi Home app (or Dreamehome for Dreame devices), below is the compatibility table for popular models:
| Model robot vacuum cleaner | Support for voice replacement | Required firmware | Management annex |
|---|---|---|---|
| Xiaomi Mi Robot Vacuum-Mop 2 Pro | Yes (full) | 3.5.9 and higher | Mi Home / Mi Home (EU) |
| Xiaomi Mi Robot Vacuum-Mop P | Yes (partial) | 3.3.9_0042 higher | Mi Home |
| Dreame D9 / D10 Plus | Yes (only via Dreamehome) | Any (updated automatically) | Dreamehome |
| Viomi V3 / SE | Yeah (requires root access) | 2.1.5. and above | Mi Home (Chinese version) |
| Xiaomi Mi Robot 1S | No (hardware restrictions) | — | Mi Home |
⚠️ Note: Firmware devices for the Chinese market (CN) They can block the installation of third-party voice packets, in which case you will need to flash it to a global or European version of the software.
If your model is not in the table, check it in the official Xiaomi forum or in thematic groups (for example, 4PDA).
Preparation: What to do before installation
Before downloading the voice packet, follow a few critical steps to avoid crashes:
- 📱 Update the Mi Home or Dreamehome app to the latest version.Older versions may not support file downloads.
- 🔄 Check the firmware version of the robot: go to the device settings → On the appliance.
- 📡 Connect the robot to stable Wi-Fi. Use a 2.4 GHz network - 5 GHz may not be supported.
- 🔋 Charge the vacuum cleaner to 100%, interruption of the process due to battery discharge will cause failure.
A unique feature of Xiaomi robots is that voice packets are tied to the region of the Mi Account account, and if your account is registered in China, you can not download European or Russian voice without changing the region.
Also prepare:
- 💾 A flash drive. FAT32 (Up to 32 GB – for models that require manual file downloads.
- 🖥️ Computer - for unpacking archives with voice packets.
- 📄 Backup of robot settings (optional, but recommended).
Check the model and compatibility |
Update the Mi app Home/Dreamehome|
Connect the robot to Wi-Fi 2.4 GHz |
Charge the battery to 100%|
Prepare the flash drive. FAT32 (if required)-->
3.Where to download voice packets for Xiaomi
Official voice packages from Xiaomi are available only for a limited number of regions, for Russian language you will have to use files from the community.
- 🌍 Official Xiaomi Forum (Mi Robot section): c.mi.com.Look for themes tagged [Voice Pack].
- 📌 4PDA: In the branches of specific models (for example, Mi Robot Vacuum-Mop 2 Pro).
- 📦 GitHub: Open voice packet repositories (e.g, Maxmudjon/xiaomi_voice).
- 💬 Telegram chats: @xiaomirobot or @dreamerobot.
⚠️ Note: Only download files from trusted sources. Fake voice packets may contain malicious code that will block a robot or steal your Mi Account information.
Files are usually presented in formats:
- .zip – archive with voice samples (you need to unpack).
- .pkg is a ready-made package for download through the application.
- .wav – separate audio files (for manual replacement).
💡
Before downloading, check the date of publication of the voice packet. Files older than 2023 may not work with current firmware.
4. Step-by-step instruction: how to install a voice packet
The installation algorithm depends on the model of the robot, and below is a universal instruction for most Xiaomi and Dreame devices:
Method 1: Mi Home (for supported models)
- Open Mi Home, select your robot vacuum cleaner.
- Go to Settings → Voice Alerts (or Sound Settings).
- Click Add Voice Package (or Download Voice Pack).
- Select the language (Russian or Custom for the downloaded file).
- Confirm the installation. The robot will restart.
Method 2: Manual booting via flash drive (for Viomi, older models)
- Download and unpack the archive with a voice packet on a FAT32 flash drive.
- Connect the flash drive to the robot through USB-port (usually located under the cover).
- Turn on the vacuum cleaner, wait for the sound signal (squeak) indicating the detection of files.
- In the app, go to Settings → Voice Update and select a file.
Method 3: Through ADB (for advanced users)
If standard methods do not work, you can download voice files over ADB:
adb connect [IP-robot address]
adb shell
mount -o remount,rw /system
cp /sdcard/voice/*.wav /system/media/audio/tts/
chmod 644 /system/media/audio/tts/*
reboot⚠️ This method requires root access and may result in loss of warranty.
What if the robot can’t see the flash drive?
Typical problems and their solutions
Even after successful installation, the voice packet may not work properly. Consider the most common errors and ways to fix them:
| Problem. | Possible cause | Decision |
|---|---|---|
| Voice unchanged after installation | Incompatible packet or cache failure | Reboot the robot, clear the cache in Mi Home |
| Robot Squeaks Instead of Speech | Damaged sound files | Reinstall the package or download another |
| Alerts in a mixture of languages | Conflict with system sounds | Reset your voice settings to factory |
| The app does not see the option "Voice Alerts" | Outdated firmware or account region | Update or change region in Mi Account |
🔹 If the robot stopped responding to commands after changing its voice, reset through the Reset button (hold 10 seconds) and this will return factory settings, including the original voice.
🔹 Is the voice interrupted or distorted? Check if the power saving mode is on in the robot settings. Turn it off in Settings. → Nutrition.
💡
Before you call in support of Xiaomi, return the original voice package. Using third-party files may be a reason for denial of warranty service.
6 How to Reclaim the Original Voice
If the Russification experiment failed or you want to return the factory settings, do the following:
- Open Mi Home, select your robot.
- Go to Settings. → Voice alerts.
- Click Reset to Factory (or Restore Default).
- Confirm the action. The robot will reboot.
For Viomi models or manually loaded devices:
- Delete the voice packet files from the flash drive.
- Connect an empty flash drive to the robot and reset through Settings → Voice Reset.
⚠️ Note: On some firmware, a voice reset results in a complete reset of the robot's settings (including room maps). → Backup.
7. Alternative methods of Russification
If you can’t install a voice packet (for example, on Xiaomi Mi Robot 1S), consider alternative options:
- 📱 Use a voice assistant (Alice, Google Assistant) to control the robot through Mi Home. Set up routines like "Alice, start cleaning up".
- 🔊 Turn off voice alerts completely in Settings → Sounds. → Quiet regime.
- 📲 Install third-party software like Home Assistant for smart home integration and customization of notifications.
- 🛠️ Reflash the robot to a modified firmware (for example, Valetudo) that supports Russification.
💡 Useful Life Hack: If your robot supports IFTTT, Set up alerts on your phone through this service, for example, if you make an error, the vacuum cleaner will send a push notification in Russian.