How to completely turn off the robot vacuum cleaner Xiaomi: all working ways

Xiaomi’s robot vacuum cleaners (including Mi Robot, Dreame, Viomi) are designed to work autonomously, but sometimes require a complete shutdown — for example, for long-term storage, transportation, or resetting. Unlike conventional vacuum cleaners, where it’s enough to take a plug out of the socket, smart devices have several levels of “off” from a temporary pause to a deep disconnect with the discharge of capacitors.

The problem is that many users confuse sleep (when the vacuum cleaner is "sleeping" but consumes energy) with full shutdown (when the device is completely powered down).This article covers all official and hidden methods of shutdown, including mechanical switches, program commands through the Mi Home/Dreame app, and emergency procedures for models without a physical power button.

The focus is on the nuances of what to do if the vacuum cleaner does not respond to buttons, how to avoid battery discharge during storage, and why some models (such as the Xiaomi Mi Robot Vacuum-Mop 2 Pro) require additional steps to completely shut down.

1.The difference between a "sleep mode" and a complete shutdown

Most users mistakenly believe that pressing the power button on the case or the "Stop" command in the Mi Home app completely shuts down the device.

• 🔄 Sleep mode: vacuum cleaner consumes ~0.5–1 W to maintain communication with Wi-Fi/Bluetooth, Update time and readiness for quick start-up. 1–2 month.
• ⚡ Full shutdown: all circuits are de-energized, battery discharges only due to self-discharge (~2-5% per month requires a physical shutdown or reset.
• 🔌 Mechanical shutdown: battery extraction or discharge of capacitors (used in repair or transportation).

To check the current status:

1. Bring your hand to the vacuum cleaner in the "sleep" mode - if you feel light heat, then the control board is active.
2. Look at the indicators: flashing blue/white light – sleep mode; red – error or discharge; total absence of light – the device is turned off.

2. Method 1: Completely shut down via physical button

The most reliable method for most models is to hold the power button, but the algorithm differs depending on the generation of the device:

Important: On models with touch buttons (for example, Xiaomi Mi Robot Vacuum-Mop P), the first press puts the device into sleep mode, and the retention turns off completely.

• 🔋 Check the charge level (at a charge below 10%, the button may not work).
• 🔌 Connect to the charging station and try again.
• 📱 Try turning it off via the app (see the next section).

💡

If the vacuum cleaner is squeaking a series when holding the button, it means locking because of an error. Try resetting the error through the Mi Home app in the Device Status section.

3. Method 2: Turn off via Mi Home/Dreame

Software shutdown is convenient if the physical button is not available (for example, the vacuum cleaner is stuck under the furniture) or does not work.

1. Open the app and select your vacuum cleaner from the list of devices.
2. Go to Settings → Power Management (or General Settings → Turn off for older versions).
3. Click Full Shutdown (not to be confused with Pause or Return to Base).
4. Confirm the action - the vacuum cleaner will emit an audible signal and turn off.

For the Dreame app:

1. Go to the device profile → Additionally.
2. Select Power Mode → Turn it off.
3. Hold the virtual button on the screen for 3 seconds.

⚠️ Note: Some firmware (for example, for Dreame) D10 Plus) Full Shutdown is hidden. To activate it, go to Settings. → About the device and 5 times click on the firmware version - the developer menu with additional options will appear.

Check the connection of the vacuum cleaner to Wi-Fi

Update the Mi Home app to the latest version

Close all background apps on your phone

Make sure the battery is at least 20 times charged%-->

Method 3: Emergency shutdown (if the vacuum cleaner does not respond)

If the vacuum cleaner is getting stuck, does not respond to buttons or commands from the application, use emergency methods:

Method 1: Resetting through a charging station

For models with a docking station (Mi Robot Vacuum-Mop 2 Pro, Dreame Z10 Pro):

1. Place the vacuum cleaner at the station and wait for the start of charging (green indicator will light up).
2. Turn off the station for 10 seconds, then reconnect.
3. Hold the power button on the vacuum cleaner for 15 seconds - a reset will occur.

Method 2: Battery Removal (for power users)

If other methods do not help, you can physically turn off the power:

1. Turn over the vacuum cleaner and remove the bottom cover (unscrew 4-6 Torx T5 or T6) screws.
2. Disconnect the battery connector (usually a white 2-pin connector with a latch).
3. Wait 1-2 minutes – this will discharge the capacitors on the board.

⚠️ Warning: Battery extraction resets all settings, including room maps and cleaning schedules.For LiDAR models (e.g. Xiaomi Mi Robot Vacuum) X10+) After the return connection, the sensors will need to be recalibrated.

5. Method 4: Complete reset to factory settings

If the purpose of the shutdown is not just to shut down, but to completely reset (for example, before selling or eliminating software errors), follow the following steps:

For most Xiaomi/Dreame models:

1. Turn on the vacuum cleaner (if it is turned off).
2. Hold the Power + Home button (or Power + Spot Cleaning for models without the Home button) for 10 seconds.
3. After the beep release the buttons - the vacuum cleaner will issue a voice message in Chinese (“” - “restoration of factory settings”).
4. Confirm the reset by pressing the power button again.

For models with a screen (Dreame W10, Viomi V3 Max):

1. Go to Settings → System → Data Reset.
2. Enter. PIN-code (default 1234 or 0000).
3. Select Full Reset and confirm.

💡

Resetting to factory settings removes all stored maps of the premises, cleaning schedules and suction settings, and after resetting, the vacuum cleaner will need to be reconnected to Wi-Fi and set up.

6. Features of shutdown for storage or transportation

If you plan not to use the vacuum cleaner for a long time (more than 1 month), it is not enough to just turn it off - you need to properly prepare the battery:

• 🔋 Charge level: Optimal 40-60% Full charge or discharge accelerates degradation of Li-ion battery.
• 🌡️ Storage temperature: From +10°C +25°C. Avoid damp spaces (contact corrosion risk).
• 📦 Packaging: Remove the vacuum cleaner in a box with silica gel (moisture absorber) and wrap with bubble wrap if transported.
• 🔄 Periodic inclusion: Every 3 months, turn on the vacuum cleaner for 10-15 minutes to discharge the capacitors.

For models with removable battery (Dreame T30, some versions of Viomi):

1. Remove the battery and store it separately in an antistatic bag.
2. Connect the battery to the vacuum cleaner for 1 minute every six months to calibrate the controller.

⚠️ Warning: When stored in a cold room (below) +5°C) before switching on, allow the vacuum cleaner to heat up to room temperature for 2-3 hours. A sharp temperature drop can cause condensation inside the housing and short circuit.

7. Frequent mistakes and how to avoid them

Users often encounter problems when trying to turn off the vacuum cleaner. Consider typical situations and solutions:

• 🚫 "The vacuum cleaner does not turn off with a button":
• 🔄 "After turning off the vacuum cleaner itself is turned on":
• ⚡ "Indicators burn even after switching off":

For voice-controlled models (Xiaomi Mi Robot Vacuum X10+):

If the vacuum cleaner does not respond to commands, but the indicators are on, try:

Voice command: "Hey Mija, power off" (for English firmware)


or" (for Chinese firmware)

FAQ: Answers to Frequent Questions