How to enable wet cleaning on the robot vacuum cleaner Xiaomi: a complete guide with photos and tips

Xiaomi vacuum cleaners are no longer just smart brooms — modern models are equipped with a wet cleaning function that allows not only collecting dust, but also washing the floors with the same care as a manual mop. However, many users face problems when first connecting this mode: the application does not find an option, the robot leaves divorces, then refuses to spray water. In this article, we will analyze all ways to activate wet cleaning on popular models Xiaomi Mi Robot, Dreame and Viomi, and reveal the secrets of correct setting for the perfect result.

It's important to understand that the process varies depending on the generation of the device and the firmware version. For example, in budget models like the Mi Robot Vacuum-Mop P, wet cleaning is manually enabled through the application, while the flagship DreameBot Z10 Pro or Xiaomi S10+ support automatic distribution of water into zones. We will look at universal methods, as well as nuances for specific lines, so that you can customize the robot to your needs - whether it is delicate laminate cleaning or deep tile washing.

Which Xiaomi models support wet cleaning?

Not all Xiaomi robot vacuum cleaners can wash floors, and the wet cleaning feature is relatively recent and available in the following series:

• 🔹 Mi Robot Vacuum-Mop (all modifications: P, 2C, 2 Pro, 2 Ultra – budget models with basic features.
• 🔹 Dreame (series) D9, Z10, W10, L10) — Advanced robots with wash intensity control.
• 🔹 Viomi (models) V2, V3, SE) — devices with support for hot water and antibacterial treatment.
• 🔹 Xiaomi S10/S10+ and newer – flagships with laser navigation and adaptive water spraying.

If your model is not on this list, it is likely only for dry cleaning. To clarify, check the characteristics on the official website or in the product card in the Mi Home app. Note that even if the robot supports wet cleaning, it requires a special water tank and a microfiber wipe (often included, but sometimes sold separately).

⚠️ Note: Using unoriginal water tanks or homemade wipes can lead to leaks and damage to the robot's electronics. Xiaomi is not responsible for breakdowns caused by third-party accessories.

Also, some models (like the DreameBot W10) have dual tanks, separate for clean and dirty water, allowing you to wash floors without divorce. If your robot is in this category, the adjustment process will be a little more complicated, but the result will be much better.

Preparing the robot for the first wet cleaning

Before you turn on the function, you need to properly prepare the device. Neglecting this step often leads to the robot either not spraying water or leaving puddles.

Install a water tank (check it is tightly fixed)| Attach a microfiber napkin (no folds or gaps)| Fill the container with water (no higher than the maximum mark)| Check that the robot has enough charge (at least 50%) | Update the firmware to the latest version (via Mi Home)

-->

Pay special attention to water quality. The manufacturer recommends distilled or boiled water to avoid plaque on the inside. If you plan to add a detergent, make sure it is specifically designed for robot vacuum cleaners (common household chemicals can foam and damage the spraying system).

Also check the condition of the napkin. It should be:

• 🧼 Clean (without any residues from previous cleaning).
• 🔄 Properly installed (usually with a logo upwards).
• 🚫 No holes and swollen edges (this can clog the pump).

⚠️ Warning: If the robot has not been used for wet cleaning for a long time (more than 2 weeks), before the first switching on, wash the tank and tubes under running water.

For models with automatic napkin lifting (for example, DreameBot L10 Pro), additionally check the mechanism: after installing the napkin, the robot must issue a characteristic click confirming the fixation. If there is no sound, reinstall the napkin or check if debris has fallen under it.

How to enable wet cleaning through the Mi Home app

The main way to manage is through the official Mi Home app (or Dreamehome for Dreame brand devices).The interface may vary slightly depending on the model, but the overall algorithm is as follows:

1. Open the app and select your robot vacuum cleaner.
2. Go to Cleaning (or Cleaning in English).
3. Click on the icon Wet cleaning (usually marked with a drop of water). 💧).
4. Choose the intensity of the spray: 🌊 Weak - for delicate coatings (laminate, parquet). 💦 Medium - for tiles and linoleum. 🌊🌊 Strong - for persistent contaminants (only for water-resistant surfaces!).

Start cleaning with the Start button.

Some models (e.g. Xiaomi S10+) have a sprayed area cleaning option that allows you to wash only selected areas of the floor, which is useful if you have carpets in the room that you can't wet, to activate it:

1. In the app, go to the Map → Zones.
2. Draw a rectangle on the area to be washed.
3. Select the Wet Cleaning mode and specify the intensity.

If your app doesn't have a wet cleaning option, it's likely that the robot doesn't support this feature or that you need a firmware update. Check the software version under Settings → About the device. Topical firmware usually adds new features, including improved spray management.

💡

If the robot refuses to spray water, try to hand-pour a few drops into the nozzle hole - sometimes this helps to "wake up" the pump after a long downtime.

Set up wet cleaning through voice assistants

If your Xiaomi robot vacuum cleaner is integrated with Alice, Google Assistant or Amazon Alexa, you can control the wet cleaning voice.

1. Make sure the robot is connected to the same account as the voice assistant.
2. Activate the skill for your model in the assistant app (e.g. Mi Home for Alice).
3. Use commands: 🎤 «Alice, turn on the wet cleaning on the robot vacuum cleaner». 🎤 «Okay, Google, wash the living room floor with a lot of spray». 🎤 «Alexa, get the robot to clean up the water».

Voice control is convenient for quick start, but has limitations:

• ❌ You can not more accurately adjust the spray intensity (only "weak / medium / strong»).
• ❌ Zone cleaning is not supported (the robot will wash the entire area available).
• ❌ There may be errors in command recognition (especially if the model name has numbers).

For Yandex Alice-enabled Dreame models, extended commands are available, such as, "Alice, wash the kitchen with a robot, but avoid the carpet." A full list of supported phrases can be found in the specific model documentation.

Common Problems and Their Solutions

Even after setting it up properly, users are faced with common errors, and we will discuss the most common ones and how to fix them:

If the robot starts beeping or flashing red during wet cleaning, it usually indicates:

• 🚨 Low water level - fill up the liquid.
• 🚨 Filter clog - wash it under water.
• 🚨 Sensor error – Reboot the robot (hold the power button for 10 seconds).

⚠️ Warning: If after all the manipulations, the robot still does not spray water, do not try to disassemble it yourself - this can lead to a loss of warranty.

Tips for the Perfect Wet Cleaning

To the robot wash the floors as well as a human, follow these recommendations:

• 🕒 Cleaning schedule: Set up automatic wet cleaning for times when you are not home (e.g. during the day) to allow the floor to dry before you return.
• 🧽 Cleaners: Use only specialized robot vacuum cleaner fluids (e.g. Xiaomi Floor Cleaner). Conventional floor cleaners can foam and clog pipes.
• 🔄 Alternating modes: Combine dry and wet cleaning for best results, for example, first the robot collects dust, and then cleans the floor.
• 📍 Areas without cleaning: Mark areas in the application that can not be wet (carpets, rapids, electronics on the floor).

For models with hot water (for example, Viomi V3), the liquid temperature can reach 60 ° C, which improves the quality of cleaning, but requires caution:

• Do not touch the napkin immediately after cleaning.
• Do not use laminate or parquet mode (high temperature can deform the coating).

If you have animals in your home, make sure that the robot doesn't spray water in places where bowls or trays lie. Some models (such as the DreameBot W10) can bypass such areas automatically, but it's better to be safe and adjust the forbidden areas manually.

💡

For maximum efficiency of wet cleaning, update the napkin every 2-3 uses and rinse the tank after each cleaning – this will prevent mold and unpleasant odor.

Comparison of wet cleaning on different Xiaomi models

To make it easier for you to choose a robot for your tasks, we compared the key characteristics of popular models:

As you can see from the table, budget models like Mi Robot Vacuum-Mop P are suitable for small apartments with simple coatings, while flagships like Xiaomi S10+ can cope with cleaning a large house and complex pollution. If you care about autonomy, look at DreameBot with the function of self-cleaning wipes – these robots require minimal maintenance.

For laminate or parquet owners, the maximum spray humidity parameter is critical. For example, the Viomi V3 allows you to adjust the minimum moisture level, which is safe for sensitive coatings. But the Mi Robot Vacuum-Mop 2 Ultra in "heavy" spray mode can leave excess moisture, so it is better to use it on tile.

FAQ: Frequent questions about wet cleaning on Xiaomi robots