How to connect the 70mai DVR to your phone: Step-by-step setting

Modern car gadgets are no longer just black boxes recording the road, and have become complex multimedia complexes. owners of 70mai equipment often face the need to quickly upload video files or change settings without using a computer. Connecting a smartphone to the device gives access to full functionality, including control of the G-sensor, setting up interval shooting and watching the recording in real time.

The synchronization process does not require deep technical knowledge, but it has its own nuances, which depend on the operating system of your gadget. The Wi-Fi module built into the recorder creates a local network through which data is exchanged. It is important to understand that for the initial setup, the Internet connection on the phone is not required, since communication goes directly between devices.

In this article, we will look at all the stages of pairing, from choosing the right application to solving common connection errors. You will learn how to properly configure network settings to avoid connection breaks, and what hidden features are available after successful authorization. Competent setting will allow you to use ADAS (collision warning system) and voice control at full strength.

⚠️ Before setting up, make sure your smartphone battery is at least 20% charged, as an active Wi-Fi module and video recording can quickly consume energy.

Selecting and installing the right application

The first and most critical step is to install software. Xiaomi and its 70mai sub-brand use different ecosystems, so it's important not to confuse apps. Most modern models, such as the A500S, A800S, Lite, Pro Plus+, need to use the 70mai app. Older models may require Mijia, but 90% of the time it's branded software from the manufacturer.

Downloads must be made exclusively from official Google Play or App Stores. Third-party sources may contain modified versions of software that not only do not guarantee stable operation, but may also pose a threat to the security of your data. Once installed, the application will request a number of permissions, including access to geolocation, camera and storage - all of which must be provided for correct operation.

The application interface may be partly in English or Chinese depending on the region of the account, but the basic navigation is intuitive. The first launch will require a 70mai ID account registration, which will allow you to save settings in the cloud and receive notifications about critical events on the road.

• 📱 Download the app «70mai» from the official store of your OS.
• 🔐 Register an account using a phone number or email.
• 📍 Provide all the requested permissions (GPS, memory, camera).
• 🌐 Make sure the correct region is selected (usually Europe or Russia).

⚠️ Note: Do not try to use the Mi Home app to connect the registrars of the series 70mai, If the instructions for a particular model do not explicitly state otherwise, this will lead to a device search error.

💡

If you have changed the region in the application, be sure to close it completely (unload it from memory) and run it again so that the changes take effect.

Preparation of the video recorder for interface

Before you search for a device with a phone, you need to put it into a setup mode. Usually, after power is turned on, the 70mai recorder automatically goes into a standby mode if it was not previously paired. The status indicator will flash red to signal readiness to work. If the device has already been configured, you will need to reset the network settings.

Forcing the pairing mode on most models requires pressing and holding a single physical button on the body for 3-5 seconds. You will hear a voice message "Wi-Fi connected" or similar, after which the indicator changes the flashing mode, at which point the gadget creates its own Wi-Fi hotspot.

It is important that the car is in a place with a steady signal, although you do not need the Internet to set up the initial setup. Make sure the DVR gets stable power from the on-board network or power-bank. Lack of voltage can cause the Wi-Fi module to simply not start and you will not be able to complete the configuration.

If the light is flat or not, check the memory card. Some 70mai models block Wi-Fi when the microSD card is missing or when it is not working, and formatting the drive through the menu of the recorder itself often solves the problem.

Connection process via Wi-Fi network

The most important step is to connect your smartphone to the DVR's local network, open the Wi-Fi settings on your phone and find the network with the name beginning on the phone. 70mai_ or 70maiDashCam_. The default default password is usually listed on a sticker under the device or in the instructions, most often it is 12345678.

Once you enter your password, the phone may give you a warning that the network has no Internet access, which is absolutely normal, because you are connected to a local device, not a global network, and do not disconnect from this network, even if the phone starts switching to mobile Internet.

Go back to app 70mai. If you're on Android, the system can request permission to access the location to search for devices on the network. Click "Allow." The app automatically finds the connected registrar and prompts it to add to the list of devices. On iOS, the process can take a little longer because of the security features of the system.

⚠️ Note: On Android 10 and above, the registrar module must be turned on for Wi-Fi to work GPS (geolocation on your smartphone, even if you are not in the navigator.

In case the automatic search fails, try using manual add-on mode ("+" in the corner of the screen). Sometimes switching the phone system language to English while you set up, as some older firmware versions may not properly encode Cyrillic network names.

Setting up parameters and updating the firmware

Once you've successfully connected, you'll see the main menu of the device, where you can access all the key settings, first check firmware, manufacturers regularly release updates to improve Wi-Fi connectivity and video encoding, go to More or Settings, then Firmware Update.

Update is better to carry out, connecting the phone to a stable Wi-Fi router with the Internet, as the firmware file can weigh more than 100 MB. During the process, try not to disconnect the device from the registrar outlet and do not leave the application, otherwise the device can turn into a “brick”.

Next, you can adjust the recording settings. In the Video Settings menu, you can select the resolution (for example, 2592x1944 for 4K or 1920x1080 for Full HD), frame rate and viewing angle. You can also adjust the sensitivity of the G-sensor. In urban conditions, medium or low levels are recommended to avoid false positives on road bumps.

And the time adjustments deserve special attention, although many models have a different time. GPS-The module and the time synchronize automatically, checking this parameter is critical to the legal force of the video.

Comparison of Functionality of Different Models

The 70mai ecosystem is vast, and the connectivity functionality may vary slightly depending on the model.Budget versions may not support remote browsing over 4G (only when connected to a Wi-Fi router), while flagship models have built-in communication modules.

Below is a table to help you understand the differences in connectivity and control for popular models:

Owners of models without built-in GPS should purchase an external module connected through the Type-C port. This will not only fix the route on the map in the application, but also automatically synchronize the exact time, which will eliminate manual adjustment at each launch.

💡

Presence of built-in GPS-The module simplifies operation significantly, as it eliminates the need to manually set the time and date after each reboot of the car.

Problem Solving and Frequently Asked Questions

Despite the simplicity of the procedure, users can encounter difficulties, and the most common problem is that the phone "sees" the registrar's network but does not connect to it, or writes "Impossible to connect," which is solved in 80% of cases by "forgetting" the network in the phone's Wi-Fi settings and re-entering the password.

Another common situation is that the app doesn't see the device even though Wi-Fi is connected. Check if the phone has Mobile Data mode activated with priority over Wi-Fi. Android Wi-Fi settings often have a "Switch to Mobile Data" option that you need to turn off for that particular network.

If none of these methods work, try resetting the recorder completely, usually by pressing the thin object reset button into the hole on the case or holding the main button for more than 10 seconds, which will return the device to factory settings, including the Wi-Fi password.

• 🔄 Reboot the smartphone and the DVR itself (turn off the power supply).
• 📶 Delete the network profile 70mai from saved Wi-Fi networks on the phone.
• 🔋 Check the power cable - poor-quality wire can give voltage drawdowns.
• 📱 Make sure the phone is not on. VPN, which can block local traffic.