How to connect Xiaomi humidifier to Mi Home on iPhone 10: full instructions with nuances

Connecting Xiaomi’s humidifier to the smart home ecosystem through the Mi Home app on iPhone 10 seems like a simple task — until you encounter typical bugs like “device not found” or “can’t add.” Especially difficult for those who use outdated versions of iOS or incorrect regional settings in Mi Home. In this article, we will discuss not only the standard connection procedure, but also ways to circumvent common problems that are relevant for the iPhone 10 in 2026.

It is important to understand: the synchronization algorithm depends on the model of the humidifier (Smartmi Air Humidifier 2, Viomi). V3, Mi Air Humidifier Pro, etc.), the firmware version of the device and even the region selected in the settings of the Mi Home account. For example, some models (for example, Smartmi Zhimi Humidifier). CA1) They're not officially supported in the European region, but they can be connected via workarounds. We'll look at all scenarios, from basic setup to solving non-obvious bugs.

1.Preparation: What to check before connecting

Before you start syncing, make sure all the components are ready to go, and most often, problems arise from small things: a dead battery in the humidifier, an outdated version of the Mi Home or an incorrectly selected region in the account.

• 📱 iOS version: iPhone 10 should be installed at least iOS 14.0 (optimum - 15.0)+). Check in Settings → Mainstream → About this device.
• 🌍 Region in Mi Home: Xiaomi humidifiers are tied to specific regions. Russia (Russia), Europe (Europe.
• 🔋 Humidifier charge: If the model has a battery (for example, Smartmi Portable Humidifier), charge it to 100.
• 📶 Wi-Fi network: the humidifier only supports 2.4 GHz. If your router is running on 5 GHz, create a separate network or turn on compatibility mode.

Pay special attention to the region, for example, if you bought a humidifier in China or on AliExpress, and Mi Home chose Russia, the device may not appear in the list of available ones, in which case you will have to change the region manually (instruction below).

💡

If the humidifier was previously connected to another account, reset: hold the power button for 5-10 seconds until the indicator flashes yellow/orange.

2. Installation and configuration of the Mi Home app on iPhone 10

The Mi Home app (renamed Mi Home/Xiaomi Home) is the only official way to manage the humidifier, but the iPhone 10 may have problems installing or running the program due to Apple's limitations.

1. Download the app from the App Store via the link. Make sure you install the latest version (at 2026, 6.0.100)+).
2. Sign up for an account or sign in to an existing one. If you already have a Xiaomi profile (like a smartphone), use it.
3. Select a region: Open Mi Home → Click on the avatar in the upper right corner → Account settings → Region. For Russia, choose Russia; for Europe, choose Europe; don't choose China unless you're sure of compatibility!

Allow notifications and geolocation

Once installed, check if your iPhone 10 is displayed on the device list. If not, reboot your phone and re-enter your account. Also make sure that iOS settings allow:

• 📍 Settings → Confidentiality → Geolocation services → Mi Home → «In the case of».
• 🔔 Settings → Notifications → Mi Home → turn on the alerts.

3. Step-by-step connection of the humidifier to the Mi Home

Now, the basic process is that the instructions are universal for most models, but we'll give you the nuances for the specific devices, and it's important that the whole process should be done on a single Wi-Fi network (2.4 GHz).

1. Activate the pairing mode on the humidifier: For Smartmi Air Humidifier 2: hold the power button for 3 seconds until the indicator starts flashing blue. V3: Press and hold the touch button «+» and «−» For Mi Air Humidifier Pro: once touch the touchpad, then hold for 5 seconds.

Mi Home

press «+» (Add the device)

"Humidizer"

Confirm the connection:

• Once connected, return to Mi Home and search for the device will begin.
• Wait until the setting is complete. The humidifier will sound and the app will have its card.

If you encounter a “Can’t Add Device” error during the device search phase, try:

• 🔄 Reset the humidifier (remove the plug for 10 seconds).
• 📶 Reconnect iPhone 10 to Wi-Fi by turning it off VPN or energy-saving regimes.
• 📱 Remove the Mi Home cache (iPhone settings) → Mi Home → Clear the cache).

4. Common mistakes and their solutions

Even if the instructions are followed correctly, iPhone 10 users are often faced with bugs, and we have collected typical problems and ways to fix them, relevant for 2026:

Especially often, iPhone 10 users are faced with the problem of “failed to get a token” due to the restrictions of iOS on the background of the applications.

1. Open the iPhone Settings → Mi Home → Background update and enable the option.
2. In the same menu, activate the Local Network (allows interaction with devices on the same network).
3. Restart Mi Home and reconnect.

💡

If the humidifier is connected but does not respond to commands from the application, check if your router blocks traffic to ports 80 and 443 (used to communicate with Xiaomi servers).

5.Uniform humidifier setting after connection

Once synchronized successfully, the device will appear in the Mi Home main menu, and can now be customized to suit your needs, such as setting a target humidity level, setting a schedule, or integrating with other Xiaomi devices (such as a thermostat or temperature sensor).

The main parameters that should be set up immediately:

• 💧 Targeted humidity: optimal range 40-60% for children or allergic people can be increased to 65%.
• ⏰ Schedule: for example, turn on the humidifier at night (22:00 to 7:00) or when the humidity drops below 40%.
• 🌬️ Work mode: Auto-device regulates the intensity; night work is quiet (suitable for bedroom); children's work is increased water filtration (if supported by model).
• 🔄 Firmware update: check for updates in the device menu. Newer versions often fix plugged bugs.

Additional features are available for advanced users:

• 🔗 Google Assistant or Alice integration: connect Mi Home to the corresponding service in your account settings.
• 📊 Usage statistics: in the device menu you can see humidity charts for the week / month.
• 🛠️ Set up notifications: for example, alerting you to a low water level or to the end of a humidification cycle.

💡

If the humidifier supports IFTTT, Create an applet to automatically turn on when humidity drops below a predetermined level. To do this, link Mi Home to the service via the web interface IFTTT.

6.Utilizer control via widgets and voice assistants

One connection to Mi Home is not enough for a full-fledged smart home. To control the humidifier as conveniently as possible, set up quick access:

Widgets on the iPhone 10 screen:

1. Click and hold the empty space on the main screen → press «+» top-left.
2. Find the Mi Home widget and select a size (e.g, 2×2 compact-display).
3. Add a widget and set it to display humidity or on/off buttons.

Voice control via Siri:

Although Xiaomi does not-native Integration with Siri, you can use the workaround through Shortcuts:

1. Open the Shortcuts app (if not, download from the App Store).
2. Create a new script → Add the action "Open" URL».
3. Insert the reference form: mihome://devicecontrol?did={ID_devices={"method":"set_power","params":["on"]} (replace {ID_on the actual DID your humidifier, which can be found in Mi Home in the device settings).
4. Save the script and activate it with a voice: "Hey Siri, turn on the humidifier."

Managing through Google Assistant or Alice:

• Open Mi Home → Profile → Settings → Voice assistants.
• Select the service (Google or Yandex) and log in.
• After syncing, say, “OK Google, turn on the humidifier at 50%” or “Alice, set the humidity at 60%.”

💡

Voice commands only work when the humidifier is connected to the Internet, and if the device is offline, the assistants will not be able to send the command.

7. Update firmware and reset settings

Regular updates to the humidifier firmware fixes bugs, adds new features and improves compatibility with iOS. You need to manually check updates, as automatic updates may not work on older versions of the Mi Home.

How to update firmware:

1. Open the device card in Mi Home.
2. Go to Settings (⚙️) → Firmware update.
3. If a new version is available, click Update and wait until it is completed (don’t disconnect the humidifier from the network!).

Reset to factory settings:

If the device is unstable or you want to sell it, reset:

• For most models, hold the power button for 10-15 seconds until the indicator flashes red.
• For Viomi. V3: hold on «+» and «−» 10 seconds.
• After reset, the device will disappear from the Mi Home and it will have to be reconnected.

8. Alternative ways to control the humidifier

If Mi Home is unstable or you don’t like its interface, you can use alternative apps and services, but note that not all of them support all humidifier models.

Official alternatives:

• 📱 Xiaomi Home (new name Mi Home for some regions) features identical, but the interface may differ.

Third-party annexes:

• 🔧 Home Assistant: Open platform for smart homes. requires customization, but gives full control over Xiaomi devices.

Local management without the Internet:

If the humidifier supports MiOT, you can control it over a local network without the Xiaomi cloud.

1. Find out. IP-Device address in router (usually starting with 192.168.).
2. Use applications like this. HTTP Request Shortcuts for sending commands API. Example of a command to include: POST http://{IP_device}/miIO.info Headers: Content-Type: application/json Body: {"method":"set_power","params":["on"]}

💡

Local management may require a device token, which can be obtained through the Mi Home Token Extractor app (requires an Android device).

⚠️ Note: Using third-party apps may violate the device warranty. Also, not all humidifier models support local management - check compatibility on forums (for example, check for a link between the two, 4PDA).

FAQ: Frequent questions about connecting Xiaomi moisturizer