How to connect the robot vacuum cleaner Xiaomi to the phone: step-by-step instructions with a photo in Russian

Xiaomi’s robot vacuum cleaners have long been an integral part of smart homes, but many users have difficulty connecting their device to a smartphone for the first time. Without proper synchronization, you won’t be able to manage your cleaning remotely, adjust your schedule, or receive job status notifications. This article will help you understand the process of connecting any model – from the budget Mi Robot Vacuum-Mop to the flagship DreameBot Z10 Pro – with detailed screenshots and explanations at each stage.

We’ll look at two main ways to connect: through the official Mi Home app (now Xiaomi Home) and alternative software for models that are not supported in your region, and learn how to solve common errors like “can’t find the device” or “incorrect Wi-Fi password”, and what settings to change immediately after connecting for optimal vacuum cleaner operation. All steps are illustrated by current screenshots in Russian, and the instructions are adapted to the latest versions of the applications (2026).

1.Preparation for connection: what to do before the start

Before you start syncing, make sure that all the preconditions are met, which will save you 90% of the possible problems during the connection stage.

• 📱 Smartphone: Install the latest version of the Xiaomi Home app (formerly Mi Home) from Google Play or the App Store. Android requires version 5.0 and higher, iOS 11.0+.
• 🤖 Robot vacuum cleaner: Charge the device to at least 30% (optimum 100%).Most Xiaomi models refuse to turn on at a charge level below 20%.
• 📶 Wi-Fi network: vacuum cleaner supports only networks 2.4 GHz. If your router is running 5 GHz 2.4+5 GHz, we'll have to temporarily shut down. 5 GHz or create a separate network for 2.4 GHz.
• 🔒 Wi-Fi password: Make sure you know the exact password from the network. WPS, Its support depends on the model of the vacuum cleaner (for example, Viomi). V3 not working WPS).

Pay special attention to the choice of region in the Xiaomi Home app. The default may be China (Mainland China), which will lead to problems with connecting devices designed for the global market.

⚠️ Warning: If you've tried to plug in a vacuum cleaner and you've got an error, reset it. To do this, press the power button on the case for 10-15 seconds until you hear the beep (Dreame models - before the indicator flashes in red).

2. Installation and configuration of the Xiaomi Home app

The official Xiaomi Home app is the only reliable way to connect most models of robot vacuum cleaners. Even if you plan to use alternative software (such as Home Assistant), the initial binding must go through the original application.

Download Xiaomi Home at the following links:

• 🤖 Android size ~120 MB)
• 🍎 iOS (size) ~150 MB)

After installation, follow the following steps:

1. Open the app and select the region of Russia (or Europe if your model is not supported in the United States).
2. Sign up or sign in to an existing Xiaomi account.If you don't have an account, use your email or phone number to sign up.
3. Click on the + icon in the upper right corner and select Add Device.
4. In the category list, tap on Cleanup, then select your model of vacuum cleaner. If it's not on the list, try the Other option.

At this point, the app can request access to location, camera, and files. Allow all requests — without them, the connection can end in error. For example, access to the location is needed to determine the region of Xiaomi servers, and the camera will need to scan. QR-vacuum-body code.

💡

If your vacuum cleaner model doesn't appear on the list, try changing region to China, plugging in the device, and then bringing the region back, which helps with new models that haven't been added to the global version of the app yet.

3. Step-by-step connection of a robot vacuum cleaner to Wi-Fi

Now, to the most critical step, synchronizing the vacuum cleaner with your wireless network, follow the instructions carefully, as the slightest error (such as an incorrectly entered password) will result in a reset.

The connection algorithm for most models (Mi Robot Vacuum-Mop 2 Pro, DreameBot D10 Plus, etc.)

1. Turn on the vacuum cleaner by pressing the power button on the case. Wait for the beep (usually a short beep). Some models (Viomi V2 Pro) need to hold the button for 3 seconds.
2. In the Xiaomi Home app, click Add Device → Clean → [your model]. If the model is not found, select Mi Robot Vacuum (Universal Profile).
3. The app will suggest connecting to the vacuum cleaner's temporary network. Go to the Wi-Fi settings on your phone and connect to a network called mirobot-XXXX or rockrobo-XXXX. No password is required.
4. Back to Xiaomi Home. The app will automatically determine the model and request your home Wi-Fi network data. Enter the network name (SSID) and password. Make sure the letter register matches!
5. Wait for the connection to be completed (usually takes 30 to 60 seconds), the vacuum cleaner will emit a long beep, and a card with basic parameters will appear in the application.

If the process is suspended during the “Connect to Wi-Fi” stage, check:

• 🔄 Restart router and vacuum cleaner (turn off/on power).
• 📵 Make sure that the smartphone is not connected to VPN Proxies – they block access to Xiaomi servers.
• 🔒 Check that the Wi-Fi password does not contain Cyrillic characters or spaces. Change the password to Latin if necessary.

Install Xiaomi Home with the latest version |

Charge of vacuum cleaner >30%|

The router is operating in 2.4 GHz | mode

Wi-Fi password contains only Latin characters |

The region of "Russia" or "Europe" is chosen"-->

4. Solving common connection errors

Even with the correct follow-up, there may be failures, and we have compiled common errors and ways to fix them based on user feedback and official Xiaomi documentation.

If neither of these methods worked, try connecting the vacuum cleaner via an alternative Dreamehome app (for Dreame models) or Viomi Home (for Viomi), which often works better with “problem” devices, especially if they were purchased from Chinese sites like AliExpress.

⚠️ Some of the models (Xiaomi Mi Robot Vacuum) X10+) require a firmware update before first connecting. If the vacuum cleaner does not respond to commands, check for updates in the Settings section of the device → Update of the PO.

5.Tune the robot vacuum cleaner after connecting

After successful synchronization, you can adjust the vacuum cleaner to your needs, and you can change the basic parameters directly in the Xiaomi Home app:

• 🗺️ Map of the room: Start the first cleaning in Full Cleaning mode, so that the vacuum cleaner will make a map of the apartment, and then you can divide it into zones and set up cleaning in the rooms.
• ⏰ Schedule: Set up automatic cleaning by day of the week and time; Optimally, when you are not at home (for example, from 10:00 to 12:00).
• 🔊 Voice Alerts: Turn off or reduce the volume of voice prompts in Settings → Voice notifications.
• 🔋 Cleaning modes: Choose the optimal balance between quality and cleaning time. Maximum is suitable for carpets, for smooth surfaces - Balanced.

For models with wash function (Mi Robot Vacuum-Mop 2 Pro, DreameBot W10) additionally configure:

• 💧 Humidity level: For laminate, choose Low, for tile - High.
• 🚫 Areas without washing: Mark areas where water cannot be used (such as carpets).

Keep your vacuum cleaner in mind: Clean the main filter every 1-2 weeks, and the side brushes every month, and the app has maintenance reminders, but it's better to make a habit of checking the condition of the components yourself.

💡

After the first cleaning, be sure to save the map of the room in the application. Without the saved map, the vacuum cleaner will not be able to work correctly with zones and virtual walls.

6. Alternative methods of vacuum cleaner control

If the standard Xiaomi Home app doesn’t suit you, there are several alternatives to vacuum cleaner management:

• 🤖 Voice assistants: Connect the vacuum cleaner to Alice (Yandex), Google Assistant or Amazon Alexa. To do this, go to Xiaomi Home Device Settings → Voice control.
• 📱 Third-party applications: For advanced users, Home Assistant (requires customization skills) or IoT Mi Control (more features than in the official application) are suitable).
• 🖥️ PC management: via the Mi Home web interface (available at: https://home.mi.com) or plugins for smart home (OpenHab).

For the Dreame and Viomi models, there are branded applications with advanced functions:

• Dreamehome – supports detailed suction power and wet cleaning.
• Viomi Home – allows you to create complex cleaning scenarios based on the type of coverage.

If you’re using a smart home based on Apple’s HomeKit, you’ll have to use workarounds, as Xiaomi doesn’t officially support integration with HomeKit. You’ll need a bridge like HomeBridge or HOOBS, but that’s a topic for a separate article.

7. Update firmware and reset settings

Regular firmware updates improve the vacuum cleaner by adding new features, correcting navigation errors and improving energy efficiency. Check for updates every 1-2 months through Device Settings → Software Update.

If after the update the vacuum cleaner began to work incorrectly (for example, does not build a map or does not respond to commands), reset the settings:

1. Turn on the vacuum cleaner.
2. Press the Home and Power buttons simultaneously for 5-10 seconds (for models without the Home button - only Power).
3. Wait for the sound signal and the indicator flash.
4. Reconnect the vacuum cleaner as you did on the first run.

Once reset, all saved maps, schedules, and settings will be deleted, and if you have had a complex zone configuration, take screenshots of the map in the app before resetting, which will help you restore the settings faster.

⚠️ Attention: Do not interrupt the firmware update process! If the vacuum cleaner is disconnected from the power during the update, it may stop turning on. USB-OTG (Only for experienced users).

FAQ: Answers to Frequent Questions