Connecting the robot vacuum cleaner Xiaomi G1 to the iPhone: a step-by-step guide with photos

The Xiaomi G1 robot vacuum cleaner is one of the most popular cleaning automation solutions, but its initial setup may raise questions for iPhone owners. Unlike Android devices, where the process is often intuitive, Apple users face the nuances of authorization through Mi Account, the features of the Mi Home app in iOS and the limitations of regional settings. This article will help avoid typical errors and customize the Xiaomi G1 from the first time.

We will not only explore basic Wi-Fi connectivity, but also alternative ways (e.g., HomeKit by bypass) and solutions to common problems such as a Device offline error or the inability to find a vacuum cleaner on the network, with special attention to setting up zoning and voice control via Siri, which is often overlooked in standard instructions.

1.Preparation for connection: what to check before starting

Before you start pairing, make sure that all the components of the system are ready to work, most often problems arise from not meeting basic conditions, such as:

• 📱 iOS version: Mi Home app requires iOS 12.0 or later. on older devices (such as iPhone 6) may crash.
• 📶 Wi-Fi grid: vacuum cleaner Xiaomi G1 Supports only the network 2.4 GHz. If your router is running 5 GHz 2.4+5 GHz (dual), it will have to be temporarily switched.
• 🔋 Battery charge: vacuum cleaner should have at least 20% charge level.
• 🌍 Regional settings: by default Xiaomi G1 Russia and CIS countries will need to change the region in the application.

Also check that your iPhone has disabled VPNs and ad blockers (such as AdGuard) that can prevent you from communicating with Xiaomi servers. If you use a corporate network with a proxy, temporarily connect to the mobile Internet.

⚠️ Note: If you have previously used a Xiaomi vacuum cleaner of another model (for example, S5 or STYJ02YM), Remove it from the Mi Home app before adding it G1. Device conflict in one account can lead to Device already exists error.

2. Install and configure the Mi Home app on iPhone

The official Mi Home app is the only legitimate way to manage the Xiaomi G1, download it from the App Store, avoiding third-party sources.

1. Launch the application and select the region of Russia (or your country), which is critical for the proper operation of the servers.
2. Sign in with Mi Account. If you don't have an account, sign up with your phone number or email. Use real data, link to virtual numbers (for example, through a virtual number). SMS-Activators can block access to the device.
3. Enable app notifications in your iPhone settings (Settings → Mi Home → Notifications). This is for alerts when cleaning has finished or errors have been made.

If you have a Network error, try:

• 🔄 Switch from mobile to Wi-Fi (or vice versa).
• 📵 Temporarily disable Two-factor authentication in your Mi Account (if enabled).
• 🌐 Change. DNS-server at 8.8.8.8 (Google) or 1.1.1.1 (Cloudflare) in Wi-Fi settings.

After successful authorization, the app will suggest adding a new device. Take your time to click Add - first make sure the vacuum cleaner is ready to pair (more on this in the next section).

💡

If you already have other Xiaomi devices (like light bulbs or sensors), add them to a separate room in the Mi Home.This will make it easier to manage and avoid confusion when creating automation scenarios.

3. Preparation of the robot vacuum cleaner Xiaomi G1 to pair

Before you connect to the phone, you need to put the vacuum cleaner in pairing mode.

1. Make sure the Xiaomi G1 is on (power button on the case is blue). If the indicator flashes orange, the device is discharged, plug it into the dock.
2. Press the Reset button for 3-5 seconds until you hear the beep, and then the indicator will flash white and orange alternately, meaning that the vacuum cleaner is ready to connect.
3. Place the vacuum cleaner on a flat surface no more than 1 meter away from the router. Thick walls or furniture can weaken the Wi-Fi signal.

If the indicator does not flash after reset, check:

• 🔌 Is the docking station connected to the socket (the vacuum cleaner does not turn on without power to the station).
• 🛠️ Is the Reset button damaged (for physical wear and tear, repair may be required).
• 🔋 Charge level (at 10% and below the vacuum cleaner refuses to enter the pairing mode).

⚠️ Warning: Don't try to connect the vacuum cleaner to your iPhone via Bluetooth directly - Xiaomi G1 It uses this protocol only to communicate with the dock, and all settings are done exclusively through Wi-Fi and the Mi Home cloud.

Battery charge > 20%|Vacuum on (blue indicator)|Reset button is pressed (flashing white/orange)|Distance to router < 1m|The router operates in 2.4 GHz mode-->

4. Step-by-step: Connecting Xiaomi G1 to iPhone

Now, to the mating process itself, follow the instructions strictly by step.

1. Open Mi Home and click Add Device (+) in the upper right corner.
2. Select the category → Cleaning → Robot vacuum cleaner.
3. Specify the model: in the list, find the Xiaomi Mi Robot Vacuum-Mop G1 (if there is no model, update the app).
4. Confirm the flashing of the indicator: press the indicator flashes quickly (if it flashes slowly, repeat the reset on the vacuum cleaner).
5. Connect to Wi-Fi vacuum cleaner: iPhone will be notified of the new network Xiaomi_Vacuum_XXXX. Connect to it (password not required) Return to Mi Home - the app will automatically detect the vacuum cleaner.
6. Select a home Wi-Fi network: In the network list, select your 2.4 GHz Wi-Fi. Enter a password (registration is important!).

Set up a room and a name

• Give the vacuum cleaner a name (for example, the living room).
• Choose a room in the house or create a new one.
• Press Ready.

Voice control via Siri

Xiaomi G1 does not have native integration with HomeKit, but you can use workaround solutions:

• 🤖 Yandex Alice: connect the vacuum cleaner through the skill Mi Home in the application Yandex.
• 🗣️ Siri Shortcuts: In Mi Home, create a script (like Start Cleaning). In the iPhone Shortcuts app, add the action Run the Mi Home script. Name a shortcut (like Hey Siri, run the vacuum cleaner).

For advanced users, there is an option with Home Assistant, but it requires skills to work with the user. YAML-configurations and a separate server (e.g., Raspberry Pi).

6. Solving typical problems after connection

Even after successful pairing, users encounter errors.

6.1 The vacuum cleaner does not respond to commands from the application

Possible causes and solutions:

• 📵 No connection to Xiaomi servers: check the Internet on iPhone and restart Mi Home.
• 🔄 Vacuum hover: Press and hold the power button on the case for 10 seconds until you hear a double signal.
• 🌍 Incorrect region: in the application settings (Profile) → Settings → Region) Choose Russia.

6.2. Device offline error when Wi-Fi is running

This problem is often related to:

• 🔌 Blocking. MAC-Addresses on the router: add MAC whitelist.
• 🔒 Isolation of clients (option) AP Isolation: Turn it off in router settings.
• ⚡ Power saving Wi-Fi: on some routers (such as TP-Link) turn off the Wi-Fi Power Saving option.