How to set up a robot vacuum cleaner Xiaomi on Android: a step-by-step guide with video

Xiaomi vacuum cleaners have long been an integral part of smart homes, but their initial setup often raises questions among new owners, especially if it comes to synchronizing with an Android smartphone through the Mi Home app. In this article, we will analyze the entire process from unpacking to the first launches, taking into account the nuances of different models (Mi Robot Vacuum-Mop 2 Lite, S7 Pro Ultra, DreameBot and others) and current versions of the software.

You'll learn how to connect the vacuum cleaner to Wi-Fi, configure cleaning areas, update maps of rooms, and solve typical problems like connection errors or incorrect display of the device in the app. To illustrate each step, you'll find screenshots from Mi Home and links to video instructions. And if you've tried to set up the vacuum cleaner, but something went wrong, at the end of this article there's an FAQ with solutions to the most common bugs.

1. Preparation for setting up: what to check before connecting

Before you start syncing, make sure that all the components are ready to go, and users often experience errors because of missed preparatory steps.

First, check the compatibility of the vacuum cleaner model with your region. Some Xiaomi devices (such as the Mi Robot Vacuum-Mop P) are not officially supported in Russia, and their configuration will require changing the region in the Mi Home to China or Singapore.

• 📱 Smartphone on Android: OS version is not lower than 8.0, free space ≥ 500MB, Bluetooth and Wi-Fi enabled.
• 🌐 Wi-Fi: 2.4 GHz (5 GHz not supported by most models), password without Cyrillic characters.
• 🔋 Charging vacuum cleaner: battery level ≥ 30% (optimum 100%) Connect the device to the docking station for 10-15 minutes before setting up.
• 📦 Supply kit: check for power adapter, cable, instructions and spare brushes.

Pay special attention to network settings. If your router is running 802.11r (Fast Roaming) or using WPA3-Enterprise, the vacuum cleaner may not connect, in which case temporarily disable these functions or create a separate network for smart devices.

⚠️ Note: If you are using a dual-band router with a common router SSID For 2.4 GHz and 5 GHz, split the networks. Xiaomi vacuum cleaner will not be able to connect to the combined network.

2. Installation and configuration of the Mi Home app

The official Mi Home app is the only legitimate way to manage Xiaomi’s vacuum cleaner (except for models with support for Google Home or Apple HomeKit), download it from Google Play or from the official Xiaomi website if your device does not support Google services.

After installation:

1. Run Mi Home and select a region. Russia is the best option, but if your model is not supported, choose China (then the interface will be in English).
2. Sign up or sign in via Xiaomi, Google or Facebook. Without an account, vacuum cleaner management is impossible!
3. Enable notifications and access to geodata (necessary for cleaning cards to work properly).

If the app requests access to contacts or a camera, it is not necessary for the vacuum cleaner to work, but it may be necessary for other Xiaomi smart devices (for example, cameras or lamps).

⚠️ Note: If you choose China, some features (e.g., integration with Yandex Alice) may become unavailable.

💡

Before registering with Mi Home, disable VPNs – some Xiaomi servers block connections from virtual networks.

3. Connecting a robot vacuum cleaner to Mi Home: step-by-step instructions

Now, to the most important step, synchronize the vacuum cleaner with your smartphone, make sure that the device is on (power button is held for 3-5 seconds) and is located next to the phone (at a distance of ≤ 1 meter).

Follow the instructions:

1. In Mi Home, click Add Device (+) in the upper right corner.
2. Choose the category Smart home → Vacuum cleaners.
3. Find your model on the list. If you don't have one, select another device and type the name manually.
4. Click Connect and confirm Bluetooth on your smartphone.
5. Hold the Power + Home buttons on the vacuum cleaner for 5 seconds until you hear a voice message in Chinese (or a signal).
6. Select your Wi-Fi network (2.4GHz only!) and enter your password.
7. Wait until the connection is completed (it can take up to 2 minutes).

If the process is suspended during the Connection to the network stage, check:

• 🔌 Correctness of the entered Wi-Fi password (registration is important!).
• 📶 Router signal – vacuum cleaner should be no further than 3 meters from it.
• 📱 Mi Home Permits – Enable location and storage access.

Once successfully connected, the vacuum cleaner will appear in the main menu of the application, and you can now start setting up the cleaning options.

4. Set up a map of the room and cleaning areas

Modern robot vacuum cleaners Xiaomi create room maps with the help of LDS-The first cleaning is always in map mode, the vacuum cleaner slowly circles the room, scanning obstacles, which can take from 10 to 30 minutes depending on the area.

After the map was created:

1. Open the Map tab in the Mi Home app.

Save the changes and start a test cleaning.

Important: If the card is not saved or resets after restarting the vacuum cleaner, update the device’s firmware via Settings → Software Update in Mi Home. Older versions of the firmware (below 3.5.8) often have this bug.

5. Cleaning schedule and additional functions

One of the key features of Xiaomi's robot vacuum cleaners is that you can set up automatic cleaning on a schedule, so you can keep it clean without you.

1. In Mi Home, select your vacuum cleaner.
2. Go to the calendar (calendar icon).
3. Click Add and point: 🕒 Time (for example, 10:00 daily). 🏡 Zones (select rooms from the map). 🧼 Mode (Silent, Balanced, Turbo). 💧 Sweat floors (if supported by the model).

Save the schedule.

In addition to the schedule, additional functions are available in Mi Home:

• 🔄 Repeated cleaning – if the vacuum cleaner missed the site.
• 📍 Point cleaning – sending a vacuum cleaner to a specific location.
• 🚪 Virtual Walls – Limiting areas without physical barriers.
• 🔊 Voice commands (via Alice or Google Assistant).

For models with the function of floor washing (Mi Robot Vacuum-Mop S7, DreameBot W10) in the settings, you can specify the level of moisture and type of coating (laminate, tile, parquet).

💡

To save battery power, set up cleaning for when you're not home, which will also reduce noise levels.

6. Update firmware and solve typical problems

Regular firmware updates improve navigation algorithms, add new features and fix bugs to update the vacuum cleaner software:

1. Connect the vacuum cleaner to the docking station and make sure the charge is ≥ 50%.
2. In Mi Home, go to Settings → Software Update.
3. If a new version is available, click Update.
4. Don't interrupt the process! It'll take 5-15 minutes to update.

If the vacuum cleaner is not updated:

• 🔌 Check your internet connection (vacuum cleaner must be online).
• 📵 Restart your router – sometimes changing helps IP-address.
• 🔄 Try changing the region in Mi Home to China and back.

Other common problems and their solutions:

⚠️ Warning: If after updating the firmware vacuum cleaner began to behave incorrectly (for example, does not see obstacles or resets the card), reset to factory settings. + 10 seconds before the indicator flashes.

Video instructions and useful materials

For clarity, we have selected the best video instructions for setting up Xiaomi robot vacuum cleaners on Android:

• 🎥 Connecting Mi Robot Vacuum-Mop 2 Lite to Mi Home (Russian, 2026).
• 🎥 Set up a map and cleaning areas for S7 Pro Ultra (with subtitles).
• 🎥 Solving Wi-Fi connection errors (Typical problems).

We also recommend official resources:

• 📄 Xiaomi support – instructions and FAQ.
• 🤖 Mi Home Web – Managing devices via browser.
• 💬 Telegram chat Mi Home Russia - community help.

If you prefer text guides, Xiaomi has a manual section for each vacuum cleaner model. Note that the instructions are in English, but there is an option for automatic translation via the browser.

FAQ: Answers to Frequent Questions