Modern kitchen is unthinkable without smart gadgets, and Xiaomi Smart Air Fryer has become a hit among fans of fast and healthy cooking. However, after cooking juicy steak or vegetables on the grill, owners often face the problem of contamination of the internal chamber. Fat plaque, burnt crumbs and persistent smell require immediate intervention to not spoil the taste of future dishes.
Many users mistakenly believe that it is enough to simply wipe the visible surfaces with a wet cloth, which is a gross misconception, since the heating element is hidden at the top of the device, where you can not reach a regular sponge, ignoring deep cleaning causes old fat to smoke at high temperatures, and the circulation of hot air is disturbed.
In this guide, we will look at proven methods to help bring your appliance to its perfect state, learn what products are safe for non-stick coating, how to get to hard-to-reach places, and why regular maintenance prolongs the life of a smart fryer.
Preparation for cleaning and safety measures
Before any manipulation of the appliance, make sure it is completely disconnected from the power grid. Residual heat can persist for 30-40 minutes after use, so let the device cool. Attempting to wash the hot bowl can lead to deformation of the Teflon coating or burn your hands.
You'll need to prepare your workplace, preferably near a sink with good lighting, you'll need soft sponges, paper towels, a toothbrush and safe detergents to clean effectively, and you won't need to use abrasive powders or metal brushes because they will irrevocably damage the nonstick layer.
⚠️ Attention: It is strictly forbidden to immerse the main body of the electronic device in water or wash it under the stream from the tap.
If you use a dishwasher, be sure to check the labeling on removable elements.Although many parts of the Xiaomi Air Fryer are labeled as dishwasher safe, aggressive chemistry and high temperatures can reduce the quality of the coating over time.
💡
Use warm water (about 40-50 degrees) for soaking – it is more effective in breaking down fats than cold water, but not as dangerous for Teflon as boiling water.
Cleaning the removable basket and bowl
The removable part is the main element that comes into contact with the products. This is where most of the contaminants accumulate. First, remove the basket from the main module and remove large food residues. If the fat is frozen, soak the parts in warm water with the addition of dishwashing agent for 15-20 minutes.
Use the soft side of the sponge to wash, use circular motions to treat the inner walls and bottom, pay special attention to the mesh bottom of the basket, through which hot air passes, clogged cells impair the circulation of air currents, which directly affects the quality of the roasting.
- 🧽 Use liquid soap for delicate surfaces so as not to scratch Teflon.
- 🚿 Rinse parts thoroughly under running water, removing all traces of chemistry.
- 🌬️ Be sure to dry all the elements before assembly to avoid mold appearance.
After washing, wipe the parts dry with a paper towel. Moisture left in the hard-to-reach areas of the mesh and bowl case can cause corrosion or unpleasant odor the next time you turn on. Regular care of the inner bowl ensures that your dishes will always taste clean without impurities.
☑️ Daily care of the basket
How to clean the heating element and upper chamber
The hardest part of the maintenance is cleaning the top, where the heating element (TEN) and the fan are located. The fat splashes inevitably rise up with the hot air and settle on the spiral and reflector. Over time, this layer of coke starts to smoke and smell unpleasant.
You can't use water directly to clean this area. The best method is to use a wet but well-pressed sponge or microfiber. Carefully, without pressing hard, wipe the metal reflector around the spiral. If the coil is strong, you can apply some cleaning agent to the sponge, but make sure that the droplets don't drain into the case.
⚠️ Warning: Never rub the heater spiral with a brush or a hard sponge. Mechanical damage to the nichrome thread will cause the element to burn out and the appliance to break down.
A great way to deep clean without disassembly is the steam bath method. Pour water (about 200 ml) into the bowl of aerogrill with citric acid or vinegar. Turn the device on at maximum temperature (200 ° C) for 10 minutes. Steam will soften the old fat on the walls and TEN, after which it can be easily removed with a wet wipe.
Why is the new aerogrill smoking?
Removal of persistent contaminants and sofa
Sometimes the usual washing method can't handle the burnt sugar or caramelized fat, which requires more active but safe treatments. Baking soda is a great abrasive that doesn't scratch Teflon. Mix the soda with a little water to the state of mush and apply it to problem areas.
Leave the mixture for 15-20 minutes so that the alkali begins to break down the contaminants. Then gently rub with a soft sponge. For particularly difficult cases, you can use specialized sprays to clean the ovens, but they should be used with extreme caution, avoiding getting on plastic elements and inside the case.
| Type of pollution | Recommended remedy | Time of exposure | Tool. |
|---|---|---|---|
| Fresh fat. | A dishwasher | 5-10 minutes | Soft sponge |
| Burnt sugar | Warm water + soda | 20-30 minutes | Silicone spatula |
| Nagar on TEN | Steam processing | 10 minutes | Wet microfiber |
| Old fat. | Oven spray | Instructions. | Soft bristles |
After using any chemical, you need to thoroughly wash all the parts with clean water several times, and residues of chemistry when heated can release toxic substances that are dangerous to health.
Cleaning of external surfaces and control panel
The look of a smart fryer also requires attention, especially if it is in an open kitchen.The plastic case and touch panel are quickly covered with fingerprints and fat film. Use a slightly moist microfiber fabric to clean.
Touch buttons should be wiped very carefully, without too much pressure, water should not leak into the gaps between the buttons or into the vents. If the control panel is heavily contaminated, apply the cleaning agent to the fabric, not the device itself.
- 🚫 Do not use alcohol-containing solvents for plastic, they can make it cloudy.
- ✨ To give shine to plastic parts, you can use polymer for plastic.
- 🧹 Regularly wipe the ventilation holes with a dry brush from dust.
Keeping the external elements clean is not only aesthetically pleasing, but also functionally, and dust trapped in the vents can overheat the electronics and shorten the life of the device.
Drying and assembly of the device
The final step is drying properly. Even a small amount of water that gets into contact groups or under the bottom of the bowl can cause corrosion or sparkling when turned on. After washing, spread all the parts on a towel in a well-ventilated place.
Make sure all surfaces are completely dry before you assemble the Xiaomi aerogrill.Put the bowl into the case until the characteristic click.Do not turn the appliance on immediately after assembly if there is doubt about complete dryness - let it stand for another hour at room temperature.
⚠️ Warning: Assembly of a wet device can lead to the formation of scale on the heating element at the first turn on, which will reduce its effectiveness.
Keep the device disassembled or with the lid/close bowl ajar to ensure air circulation inside and prevent musty smell. Regular and proper care of your smart kitchen appliances is the key to its long and trouble-free operation.
💡
The key to cleanliness is to wash the basket immediately after cooling down until the fat has frozen, which will save you hours of laundering in the future.