Did you turn on Wi-Fi on the Xiaomi Redmi Note 12 or Mi 11 Ultra, but the network doesn't show up in the list - or does the device not respond at all to connection attempts? the problem is found on both new smartphones and Mi Band 7 smartwatches or Mi TVs TV. In 80% of cases, network settings or software failures are to blame, but sometimes it is hardware malfunctions, such as a damaged antenna after a fall.
In this article, we'll look at all the possible reasons Xiaomi doesn't see Wi-Fi, from the banal router that's turned off to the hidden parameters of the developer. You'll learn how to diagnose the problem, which settings to check first, and when to bring the device to the service. For convenience, we've compiled a symptom table and action checklist, and we've added interactive surveys and tips from engineers.
If your device not only does not find the network, but connects, but the Internet does not work, this is another problem (more often associated with the Internet). DNS We are focusing here on cases where Xiaomi does not display available Wi-Fi networks at all or only sees a fraction of them.
1. Checking the basic parameters: router and device
Before digging deep into your smartphone settings, make sure the problem is not on the source side of the signal.
- π Reboot the router. Turn it off for 30 seconds, then turn it on again. Wait for full load (indicators should burn steadily).
- πΆ Check network visibility on other devices. If Wi-Fi can't see even a laptop or another phone, the problem is with the router, not Xiaomi.
- π Make sure the network is not hidden (SSID Go to the router control panel (usually at 192.168.0.1 or 192.168.1.1) and check the Enable settings. SSID Broadcast.
- π‘ Change Wi-Fi. In urban environments, networks on channels 1, 6, 11 are often overloaded. Try channel 3 or 9 manually.
If the router is working fine, but Xiaomi still canβt see the network, go to the device settings.
- Turn on and off the plane mode for 10 seconds.
- Reboot your smartphone/tablet (Redmi, POCO, Mi).
- Check if Wi-Fi is enabled in the Quick Settings panel (swipe down from the top edge of the screen).
2. Software failures: network and cache reset
Most often, the problem lies in network system settings or conflicts with saved connections.
Resetting network settings
This procedure will delete all stored Wi-Fi networks, passwords and mobile Internet settings, but will not affect personal data. MIUI 14:
- Go to Settings. β SIM-maps and mobile networks β Resetting network settings.
- Confirm the action (it may be necessary to enter) PIN-code).
- Reset the device.
Cleaning the cache of the Wi-Fi module
Sometimes it helps to reset the cache of the system application WifiService:
- Open Settings β Applications β Application Management.
- Click on the three points in the upper right corner β Show the system.
- Find WifiService (or Wi-Fi settings) and open it. β Warehouse β Clear the cache.
βοΈ Diagnostics of program failures
If you still don't see Wi-Fi after this, move on to the next sections, and it may be a router or hardware malfunction.
3. Conflicts with router settings
Some router settings can block the connection of Xiaomi devices, especially for older models or firmware with non-standard security settings.
| Router parameter | Recommended value | Why is it important? |
|---|---|---|
| Mode of operation (Mode) | 802.11 b/g/n/ac (or ax for new devices) | If it is established 802.11n, Older smartphones may not see the network. |
| Channel Width (Channel Width) | Auto or 20/40 MHz | Too wide a band (80 MHz) can cause conflict. |
| Type of security (Security) | WPA2-PSK (or WPA3-PSK router) | WEP and WPA Not supported by modern devices. |
| Filtration MAC-address | Disconnected. | If it's on, add it. MAC-The address of your Xiaomi whitelist. |
If you are not sure how to change these settings, consult the instructions of your router or provider. for example, for Xiaomi Mi Router. 4A The way to set up will be this:
192.168.31.1 β Basic settings β Wireless mode (Wi-Fi)π‘
If you have changed your router settings, you can go back and try another option, sometimes by changing your router region to Europe or the United States in additional settings.
4. Hidden functions MIUI: developer modes and diagnostics
V MIUI There are hidden Wi-Fi diagnostic tools that can help you identify the problem:
- Go to Settings. β The phone.
- Press 7 times in a row on the version MIUI, Until the message comes out, you become a developer!.
- Return to the main settings menu β Additional β For developers.
Now check these parameters:
- π Turn on Wi-Fi debugging (if available) to help determine if the device is seeing the network at a low level.
- π Wi-Fi statistics: You can see signal strength and connection speeds here (if you have a network sometimes).
- π Aggressive Wi-Fi switching. Disable this option - it can interfere with stable network search.
- π οΈ Wi-Fi Developer Mode. Turn it on and restart the device.
How to check MAC-Wi-Fi address for Xiaomi?
If you see a Wi-Fi message not turned on (error) or similar in developer mode, it is a sign of hardware failure (see section 6).
5. Problems with firmware and updates
Sometimes bugs in MIUI Or incorrect updates cause Wi-Fi problems:
Verification of the relevance of firmware
An outdated version MIUI It may be in conflict with new Wi-Fi standards (e.g., the Wi-Fi standard, WPA3 Or Wi-Fi 6. Update the system:
- Settings β About the phone β System update.
- If an update is available, install it and restart the device.
Retreat to a stable version
If the problem has occurred after the last update, try to roll back:
- Download stable firmware for your model from the official Xiaomi website.
- Go to Settings. β The phone. β Version. MIUI β press the badge βοΈ β Select a firmware file.
- Install the downloaded file and wait for the reboot.
π‘
If the Wi-Fi is gone after the upgrade and the rollback does not help, this can be a sign of damage to the modem partition, in which case only flashing through Fastboot will help.
Reset to factory settings
Last resort, if other methods don't work, beware: it will delete all data from the device!
- Make a backup copy of important files.
- Go to Settings β Additional β Recovery and Reset β Resetting.
- Choose to erase all data and confirm.
6. Hardware malfunctions: when a workshop is needed
If all the software methods have been tried, but Xiaomi still doesn't see Wi-Fi, the problem is probably hardware.
- π‘ Damage to the Wi-Fi antenna, often after a fall or impact, may move away from the board or crack.
- π Oxidation of Wi-Fi contacts, moisture or time leads to corrosion, which prevents the signal from passing.
- π₯ Overheating or failure of the Wi-Fi chip, occurs after flashing or physical damage.
- π Power problems in the module, like a faulty capacitor on the board.
How to diagnose a hardware malfunction:
- Try connecting to Wi-Fi in safe mode (press the power button) β Safe Mode. If the network comes up, it's the software problem, if it's not, it's the hardware problem.
- Hold the device close to the router (10-20 cm) If the signal does not appear, the module is defective.
- Check if Bluetooth is working, and if it's off, it's probably a problem with the antenna block.
π‘
On some models (such as the Redmi Note 10 Pro), the Wi-Fi module is combined with a Bluetooth module, and if both do not work, repairs are cheaper than replacing individual components.
Cost of repair in the service center:
- Replacement of Wi-Fi antenna: from 800 to 2000 rubles.
- Interpling of Wi-Fi module: from 2500 to 5000 rubles.
- Diagnosis: usually free or up to 500 rubles.
β οΈ Note: Don't try to disassemble the device yourself if you don't have experience. on modern Xiaomi (e.g. Mi 13 or Mi) POCO F5) Used adhesive tapes and fragile plumes - they are easy to damage.
7. Features of Xiaomi smart devices (watches, TVs, routers)
If Wi-Fi does not see not a smartphone, and another device Xiaomi β the algorithm of actions will be different.
Smart watches (Mi Band, Watch)
Wi-Fi problems with Mi Band 7 or Xiaomi Watch S3 commonly associated:
- π Update with outdated firmware. Update via Mi Fitness or Zepp Life app.
- π± Untie the watch in the app and reconnect it.
- π Low battery charge, charge the device up to 50% and try again.
TVs (Mi TV, Redmi TV)
On TVs, Xiaomi often helps:
- Network reset: Settings β The Internet and the Internet β Resetting network settings.
- Software Update: Settings β On TV. β Updating the system.
- Check cables if the Wi-Fi module is external (e.g. on Mi) TV 4S), Make sure it's tightly connected.
Routers (Mi Router, Redmi Router)
If the Xiaomi router itself does not give away Wi-Fi:
- π Check the indicators: if only the Network (usually blue) is on and Wi-Fi (orange/green) is not, the module is faulty.
- π Reset the router with the Reset button (hold 10 seconds).
- π‘ Check the antennas: on the Mi Router 4C They're not removable. AX3600 β Removable (you can try to reconnect).
8. Alternative solutions and temporary workarounds
If you do not immediately correct the problem, you can use temporary solutions:
- π² USB-Connect your smartphone to a PC or other device via USB and give away the internet.
- π Access Point Mode: Activate mobile internet on your phone and distribute Wi-Fi to other devices.
- π Ethernet adapter: You can use USB-to-Ethernet adapter for TVs or laptops.
- π‘ External Wi-Fi adapter for PCs or TVs USB-port (for example, TP-Link) TL-WN725N).
If you are waiting for repairs, but you need Internet on your smartphone:
- Activate mobile data (if available) SIM-map).
- Use modem modem from another device.
- Connect to public networks (in cafes, shopping centers).
β οΈ Note: Do not enter bank card details or passwords from important accounts when connecting to public Wi-Fi. VPN (For example, Xiaomi Mi VPN) traffic protection.