No network on Xiaomi phone: causes and solutions to the problem in 2026

You picked up your Xiaomi, and instead of the usual signal strips β€” a frightening cross or the words β€œNo network”? the problem with mobile communication on smartphones of this brand is more common than you would like, but in 90% of cases it can be solved independently in a few minutes. In this article, we will analyze all possible causes β€” from the banal β€œforgot to fly mode” to hidden failures in the firmware, and also give step-by-step instructions with illustrations for each model (from Redmi Note 12 to Xiaomi 14 Ultra).

Xiaomi phones often suffer from β€œsoftware” network issues, such as after an update. MIUI But don't rush to bring it to service, because our proven methods will help you get back to the service without losing data. SIM-The map is not a problem, we have solutions for complex cases.

1. Checking basic settings: 3 steps everyone misses

Start with the obvious β€” sometimes the problem lies in little things that are easy to miss, such as the flight mode can be activated accidentally (especially on models with a physical button, like the Xiaomi 13T), and manually disabling mobile data to go unnoticed after saving charge.

Here's what we need to do right now:

  • πŸ“± Make sure the flight mode is off: swipe down from top to bottom to open the notification panel. The icon of the airplane should be gray, not blue. MIUI This mode can be activated automatically when the battery is low (below 5%).
  • πŸ“Ά Check if the mobile Internet is enabled: go to Settings β†’ SIM-maps and mobile networks β†’ Mobile Internet. The switch must be active (blue). If you have two. SIM-Make sure the internet is on for the correct.
  • πŸ”„ Switch to automatic network selection: in the same menu, click on your name SIM-map β†’ Type of network β†’ choose 4G/3G/2G (Sometimes the phone gets stuck on the car. 3G, signal 4G weak.

Check the notification panel for flight mode

Make sure that mobile internet is enabled in the settings

Select the automatic network type (4G/3G/2G)

Restart your phone (hold the power button for 10 seconds)

-->

If you don't get the network after that, move on to the next section, but first, notice the signal icon: if you're using an E (Edge) or H+ instead of a cross, the problem may be that the operator's coverage is weak, try moving closer to the window or going outside.

πŸ“Š What kind of Xiaomi model do you have?
Redmi Note 10/11/12
Redmi 9/9A/9C
Xiaomi 11/12/13
POCO F3/F4/F5
Another model

2.Problems with SIM-map: how to check and correct

The SIM card is the most vulnerable part of the phone-to-network chain. Even a microscopic speck of dust on the contacts can cause a failure. Xiaomi models with a hybrid slot (for example, the Redmi Note 11 Pro) often have problems due to the loose fit of the card.

Follow this algorithm:

  1. Take it out and examine it. SIM-map: πŸ› οΈ Use a paper clip to extract the tray (on Xiaomi 14 the tray is on the right). πŸ” Check the contacts on the map and on the phone - they should be clean, without scratching or oxidizing. wipe them with a soft cloth (do not use alcohol!). πŸ“ Make sure the card is properly cropped: nano-SIM should fit tightly into the tray without backlash.
  2. Try another one. SIM-map: πŸ†” Insert a SIM from another operator (e.g. MTS instead of Tele2). If the network appears, there is a problem in your card (possibly blocked by the operator). πŸ“± Check out the same one. SIM-If there is no network, call the operator (support numbers: MTS - 0890, Beeline - 0611, MegaFon - 0500, Tele2 - 611).

Check the APN settings

  • πŸ“‘ Go to Settings. β†’ SIM-maps and mobile networks β†’ [yours SIM] β†’ Access points (APN).
  • πŸ”„ Click on the three dots in the top right corner and select Reset to default values.
  • πŸ“ If the reset does not help, enter the parameters APN manually (they are on your operator's website). For example, for MTS: Name: MTS APN: Internet.mts.ru Username: mts Password: mts

For older versions of MIUI (up to 12.5), the path is different:

Settings β†’ System and device β†’ Additional β†’ Resetting settings β†’ Resetting network settings

πŸ’‘

After resetting the network, the phone can search for a signal for a long time (up to 5 minutes) - do not panic or take it out. SIM-If the network is not up in 10 minutes, move to the next section.

⚠️ If after the reset of the network, the phone stopped seeing everything SIM-This may indicate a hardware malfunction of the communication module, in which case a diagnosis is required at the service center.

4. Update firmware and fix software bugs

One of the most common culprits of the β€œno network” problem on Xiaomi is the bugs in the MIUI firmware, especially after major updates (for example, the transition from MIUI 13 to MIUI 14) or when using custom firmware, the manufacturer regularly releases patches that correct such errors, but many users ignore them.

How to update the firmware correctly:

  • πŸ”„ Check the current version MIUI: Settings β†’ The phone. β†’ Version. MIUI. If the version is older than the official Xiaomi website](https://new.c.mi.com/global/miuidownload/index), It needs to be updated.
  • πŸ“₯ Download the update: Through OTA: Settings β†’ The phone. β†’ Updating the system β†’ Click on "Update Checker." Manual: download the full firmware package for your model from [forum] 4PDA](https://4pda.to/forum/index.php?showtopic=962026) (Look for a section for your model).
  • βš™οΈ Install the update: For OTA: Just follow the instructions on the screen. For manual installation, go to Settings. β†’ The phone. β†’ Update system, press three points β†’ Select a firmware file and specify the downloaded package.

If the network never came back after the upgrade, try to roll back to the previous version of MIUI. It's risky (you can lose data), but sometimes it only helps.

How to roll back firmware on Xiaomi?
1. Download the correct version MIUI s [xiaomifirmware.com](https://xiaomifirmware.com/). 2. Rename the file to update.zip Put it in the root of the phone’s memory. 3. Go to Settings. β†’ The phone. β†’ Update system, press three points β†’ Select a firmware file. 4. Confirm the rollback (the phone will restart). ⚠️ Warning: Before rolling back, back up your data via Settings β†’ Additionally. β†’ Backup and reset!

⚠️ Note: If you use custom recaps (for example, TWRP), updating through the standard menu can lead to a blink (complete inoperability) of the phone. In this case, install the firmware only through the Recovery!

5. Hardware malfunctions: when without service can not do

If all the software methods have been tried and the network has not appeared, the problem is likely hardware.

ComponentSigns of malfunctionCost of repair (β‚½)Can I fix it myself?
Antenna moduleNo network, but SIM-The card is determined, Wi-Fi is working.1 500–3 000No (requires ration)
Slot SIM-mapThe phone doesn't see any of them. SIM-map, contacts oxidized800–2 000Yeah (cleaning contacts)
Communication module (modem)No network, Wi-Fi and Bluetooth are not working either.3 000–6 000No.
Soldered antenna contactsThe network only appears in a certain position of the phone.2 000–4 000No.

How to diagnose a hardware problem:

  1. Check Wi-Fi and Bluetooth: If they don't work, the communication module is faulty. If they work, the antenna or the antenna is a problem. SIM-slot.
  2. See if the phone is responsive to movement: If the network appears when you tilt the phone or press the case, it is a sign of the antenna's soldered contacts.

Check if the phone is warming up.

  • If the back cover is heated in the upper part (where the antenna is located), it is possible to short circuit.

⚠️ Warning: If you suspect a hardware malfunction, don’t disassemble the phone yourself (especially models with adhesive casing like the Xiaomi 13 Lite).This can cause plumes to damage or dust to get inside. Better contact the authorized service center Xiaomi – there give a warranty for repairs.

6.Problems on the operator’s side: what to do if the phone is not to blame

Sometimes the problem isn't with the phone, it's with the mobile phone. SIM-The card may be blocked for non-payment, or there are technical works in your area:

Diagnostic methods:

  • πŸ“ž Call from another phone to your number. SIM-If you hear "subscriber temporarily unavailable" card is blocked.
  • 🌐 Check the status of the operator's network: MTS: [status.mts.ru](https://status.mts.ru/) Beeline: [beeline.ru/status](https://moskva.beeline.ru/customers/help/status/) Megaphone: [megafon.ru/status](https://megafon.ru/status/) Television2: [tele2.ru/status](https://tele2.ru/status)
  • πŸ”„ Re-register online: Dial ##4636##, Choose Phone Information β†’ Select a network β†’ Automatically, or enter USSD-Compulsory registration team: MTS: *2222# Beeline: *110*09# Megaphone: *505# Television2: *152#

If the operator has confirmed the problem on his side, you just have to wait. Usually, such problems are resolved within 1-3 hours. β‚½) and reboot the phone.

πŸ’‘

Before calling in support of the operator, check the balance – often the network disappears due to a negative account (even if you have an unlimited tariff).

7. Specific problems of Xiaomi models: what you need to know

Some Xiaomi models have unique network-related pains, and here are the most common:

  • πŸ“± Redmi Note 10/11/12: Problem: After updating to MIUI 14 disappear 4G. Solution: Manually specify network type LTE customized SIM-map.

If your model doesn’t make it to this list, check the information in thematic forums (for example, for example, [4PDA](https://4pda.to/) or [Mi Community](https://c.mi.com/global/)). Users often share non-obvious solutions, such as for Xiaomi Mi. 11 It helps to disable the double function. 4G customized SIM-map.

8.Extreme measures: reset to factory settings

If none of these methods work, the last thing you can do is reset your phone completely, and that will delete all the data, so back up first.

  1. Save contacts, photos and files to your computer or to the cloud (Mi Cloud, Google Drive).
  2. Take a picture of your APN settings (if they have been manually changed).
  3. Go to Settings β†’ Additional β†’ Backup and Reset β†’ Reset settings.
  4. Choose to erase all data and confirm the action.

Once reset, the phone will reboot and return to factory settings. SIM-If the problem persists, it's a 100% hardware malfunction, and you need to bring the phone to service.

πŸ’‘

Resetting to factory settings helps in 60% of cases when the network disappears after updating or installing custom firmware.

⚠️ Note: Some Xiaomi models (such as the Redmi Note 8 Pro) may require re-activation of the device via your Mi Account after a reset!

FAQ: Frequent questions about network issues on Xiaomi

πŸ” Why Xiaomi doesn’t have a network, but other phones do?
This may be due to: Incorrect settings APN (Drop them to the factory. SIM-Maps (try another card) Software failure after the update (roll back the firmware) Hardware antenna failure (repair required). Start by checking SIM-Maps on another phone – if it works, the problem is your Xiaomi.
πŸ“΅ Phones are writing β€œEmergency Calls Only” – what to do?
This error means that the phone is logged into the operator's network but cannot connect to data services. Solutions: Check your account balance (possibly locked for non-payment). Update your settings APN (See section 2. Re-register online by USSD-If nothing helps, contact the operator to check the status of the team (see section 6). SIM-map.
πŸ”„ After updating MIUI The network is gone - how to return?
This is a common problem. Try: Reset your network settings (section 3). Reset your firmware to the previous version (see spoiler section 4). Install the latest beta of MIUI (sometimes bugs are fixed faster than in stable builds). If the network disappears after upgrading through TWRP, reflash the phone using the Mi Flash Tool. If the problem persists, write in support of Xiaomi through the official Mi Community app - sometimes they send patches for specific models.
πŸ“Ά Xiaomi's not on it. 4G, only 3G β€” fix?
Reasons and solutions: The operator does not support 4G in your region, check the coverage on the operator's website. Incorrect network settings - go to Settings β†’ SIM-map β†’ [yours SIM] β†’ Network type and select 4G. The problem with the firmware - update MIUI Or you can go back to the previous version. Hardware malfunction if the phone doesn't catch. 4G even SIM-The map may have damaged the communication module. POCO X3 Pro helps enable VoLTE option in settings SIM-map.
πŸ”§ Can I repair the antenna on Xiaomi by myself?
Theoretically, yes, but not recommended. The antenna at Xiaomi is a thin path on the motherboard, and you need to repair it: a soldering station with precise temperature control. A microscope or a magnifying glass. Γ—10. Experience with SMD-Without that, you're at risk of even more damage to the board, and the average cost of repairing an antenna in a service is 2,000 to 4,000. β‚½, What is cheaper than buying a new phone.