If your Xiaomi Redmi Note is a Note 10/11/12 or earlier models like the Note 8 Pro) has stopped determining the location, shows incorrect coordinates or does not catch satellites at all - the problem can be hidden in software failures and hardware malfunctions. GPS-Xiaomiβs smartphone module often suffers from incorrect updates MIUI, conflicts with applications or mechanical damage to the antenna. 80% In some cases, the problem can be solved independently without contacting the service center.
In this article, we will analyze all possible causes - from the banal disabling of geolocation in the settings to damage. GPS-You'll learn how to check the module through the engineering menu, which apps interfere with accurate positioning, and what to do if the smartphone can't see satellites even in open areas. MIUI, which are not found on other Android devices.
No special equipment is required for diagnosis β only the smartphone itself and 10-15 If the problem turns out to be hardware, we'll show you how to minimize repair costs and avoid cheating in service centers.
Basic check: Is it on? GPS and whether the settings are correct
Before digging deeper, make sure the problem isn't with the rudimentary things: On the Xiaomi Redmi Note, geolocation is managed through three different menus, and sometimes users accidentally turn off critical settings.
Open the Settings. β Confidentiality β Permits β Geodata and check it out:
- π Precision mode: High accuracy must be selected (uses) GPS, Wi-Fi and mobile networks. Device only (clean) GPS) often fails in cities.
- π Scanner. Wi-Fi/Bluetooth: Both switches must be active, speeding up satellite search.
- π« Saving charge: in Settings β Battery. β Energy saving should not be limited to Google Play Services or Google Maps.
Also check the permissions for applications. For example, Google Maps or Yandex.Maps should have access to geodata Always, not just during use.
- Press the app icon on your desktop β Information on the annex.
- Go to Permits. β geodata.
- Select Always (for navigation services).
Diagnostics through the engineering menu: check the signal from satellites
If the settings are correct, but GPS It doesn't work, so it's time to look at the engineering menu, and it'll show you if the smartphone sees satellites and how stable the signal is:
Method 1 (for MIUI 12/13/14):
- Open the Phone app.
- Enter the combination: ##4636##
- Select Phone Information β GPS-status.
Method 2 (for older versions of MIUI):
- Install the Device Info app HW.
- Go to the GPS tab.
In the engineering menu, pay attention to:
- π°οΈ Number of satellites: if 0 or 1-2 β cockpit.
- πΆ Signal level (SNR): values below 15 dB β weak signal, above 30 dB β good.
- π Time to first fix (TTFF): normal 10-30 If more than a minute, it's a failure.
What to do if the engineering menu is not opened?
Critical error MIUI: on the Redmi Note 10/11 firmware V13.0.4.0.SKFMIXM There's a bug where the engineering menu shows the satellites, but the applications don't see them. V12.5.7.0 upgrade V14.0.1.0.
3. Calibration GPS: data reset and update AGPS
If the smartphone sees satellites but detects an error location (e.g., shows you 500 meters from the actual position), calibration will help. GPS and uploading of fresh satellite data (AGPS).
Step 1: Reset AGPS
- π± Install. GPS Status & Toolbox from Play Market.
- π Launch the application β press Manage A-GPS state β Reset.
- π‘ Then click Download (downloads fresh satellite data).
Step 2: Manually calibrate the compass (if the arrow on the cards floats):
- Open Google Maps.
- Click on the blue dot (your location).
- Select Calibration of the compass and follow the instructions on the screen (you need to rotate the phone in the air with eight).
Step 3: Update the data through MTK Engineer Mode (for MediaTek chips):
- Install the MTK Engineer Mode.
- Go to Location. β YGPS.
- Press Information. β Full β AGPS Restart.
- Then download. β Auto (downloads data for your region).
Stay in the open (no tall buildings)
Disable VPN and proxy
Turn on mobile internet (not just Wi-Fi)
Battery charge > 30%-->
β οΈ Note: If after calibration GPS stopped working at all, so the critical settings of the module were reset in the process, in which case only a complete reset to the factory settings will help (see section 6).
4. Conflicts with applications: what prevents GPS work
Xiaomi Redmi Note is often not the fault of the satellites themselves, but third-party applications that:
- π‘οΈ Block access to geodata (antiviruses, optimizers).
- π Intercept. GPS-signal (fitness trackers, navigators).
- π‘ Use fake location (cheats for games).
Top.-5 smack-down GPS Xiaomi:
| Annex | Problem. | Decision |
|---|---|---|
| Clean Master, DU Speed Booster | Google Play Services is being blocked as a βbackgroundβ | Remove or add to exceptions |
| Fake GPS Location, Mock Mock | Replaces the real coordinates | Turn off the Settings. β System system β For developers β Mock Location |
| Avast Mobile Security | Blocking access to GPS battery-saving | Turn off "Energy saving" in the antivirus settings |
| Strava, Endomondo | Conflict with Google Maps over access to the module | Close all fitness apps before using the navigator |
| MIUI Optimization (built-in) | Limits background activity GPS | Turn off the Settings. β Battery. β Optimization MIUI |
How to find the culprit:
- Start Safe Mode (click the off button) β Safe regime).
- Check it out. GPS Google Maps.
- If it works, it's the third-party app's fault. Delete them one by one, starting with the last one installed.
π‘
If GPS It only works in safe mode, but you don't want to delete apps -- add them to "Optimization Exceptions" in the battery settings.
5. Hardware problems: antenna, chip, motherboard
If the software methods didn't work, the problem could be the hardware.
- π‘ antenna GPS (Frozen or damaged after falling).
- π οΈ GPS-chip (overheated or failed).
- π Contacts on the motherboard (oxidized or contaminated).
How to check for hardware malfunction:
- Test on another device: Take a second smartphone and compare the number of satellites in the same place. 2-3 Less than one problem with the antenna.
- Check after reboot: if GPS work 5-10 minutes after switching on, and then disappears - overheating of the chip is to blame.
- Visual inspection: Remove the back cover (if you can) and check if the antenna plume is moving away (it is usually glued next to the top of the board).
β οΈ Attention: On the Redmi Note 8/9 Pro often has a defect of soldered contacts GPS-If your smartphone falls or overheats, don't try to repair it yourself, you need to solder it to the top. BGA-station (cost) ~1500-2500 β½).
Cost of repair in the service:
- π§ Replacement of antenna GPS: 800β1500 β½.
- π οΈ Chip soldering: 2000β3500 β½.
- π Contact cleansing: 500β1000 β½.
π‘
If GPS stopped working after replacing the battery or display, most likely the master damaged the antenna plume, in which case the repair warranty (if it is valid) should be free of charge.
Extreme measures: resetting and flashing
If all previous methods have failed, radical methods remain:
Reset to factory settings (delete all data!):
- Make a backup through Settings β About Phone β Backup.
- Go to Settings β Additional β Recovery and Reset β Resetting.
- Choose to erase everything and confirm.
Fastboot flashing (if the reset didn't help):
- Download the official firmware for your model from the Xiaomi website.
- Install the Mi Flash Tool.
- Transfer your phone to Fastboot mode: turn it off β Hold the volume down + Nutrition.
- Connect to your PC and run through Mi Flash (select Clean All).
β οΈ Attention: On the Redmi Note 10/11 With a blocked bootloader, flashing through Fastboot will lead to a hard brick (completely inoperable), in which case you will need an authorized Xiaomi account to unlock it.
Alternative: If you are afraid to stitch it yourself, try the update over the air:
- Go to Settings β About the phone β System update.
- Click on the icon. βοΈ β Select a Service Package.
- Download the full firmware package (.zip) and select it manually.
Alternative solutions: external GPS-modules and navigators
If repairs are too expensive or inappropriate, consider workaround options:
External Bluetooth GPS-receiver (e.g. GlobalSat) BU-353-S4):
- π± Connects via Bluetooth and transmits coordinates to the smartphone.
- π° Cost: 3000-5000 β½.
- β‘ Plus: It works even with damaged internal GPS.
Offline navigation without GPS:
- πΊοΈ Download maps in advance in Google Maps or Osmand.
- π‘ Use the definition of cell towers (less accurate, but works).
Supported applications GLONASS:
- π°οΈ GPS Test Plus shows signals and GLONASS, and GPS.
- πΊοΈ MTS Navigator β better catches in Russia thanks to the support of domestic satellites.