How to bring the screen of Xiaomi phone to the TV: all the ways with instructions

Why Xiaomi’s screen can’t be brought to TV and how to fix it

Do you want to show pictures from your vacation on the big screen, run a mobile game on your TV or stream a movie with Xiaomi - but have problems connecting? This article will help you understand why wireless broadcasting does not work, what cable is needed for a wired connection and how to set up Miracast or Google Cast on TVs of different brands.

We tested all the current ways of screen duplication on models Redmi Note 12, POCO X5, Xiaomi 13T and other smartphones on MIUI 14/15. in the guide - step-by-step instructions taking into account typical errors: from the lack of sound when connecting to lags when broadcasting video in 4K. Also you will find a table of compatibility of TVs Samsung, LG, Sony and Xiaomi TV with wireless technologies.

If you've tried to connect before and the TV doesn't see the phone or the image is slowing down, don't be quick to blame the smartphone. 60 percent of the time, the problem is router settings, the TV firmware version, or protocol incompatibility, and we'll tell you how to check and fix it without going to the service.

1. Wireless streaming on Miracast: a universal method for all Xiaomi

Miracast is a wireless screen transmission standard that supports all Xiaomi smartphones since the Redmi 4X (2017) and TVs with HDMI 1.4+. The main advantage of the method is that you do not need to connect to a single Wi-Fi network: the phone and TV create direct communication, which reduces latency to 50-100 ms (critical for games).

To activate Miracast on your smartphone:

1. Open Settings → Connection and Sharing → Screen Transfer.
2. Select the Wireless Display option (on some firmware - Miracast).
3. Turn on device search. The TV should appear in the list (for example, as Samsung TV (Miracast) or LG TV (Screen Share)).
4. Confirm the connection on both devices.

On the TV, pre-activate the signal reception mode:

• 📺 Samsung: Source → Screen Mirroring (or Smart View).
• 📺 LG: Settings → Network → Miracast/Screen Share.
• 📺 Xiaomi TV: Settings → Connection → Wireless display.
• 📺 Sony Bravia: Settings → Network → Screen Mirroring.

⚠️ Note: If the TV is not displayed in the list of devices, check: Does your model support Miracast TV (list of incompatible models - in the table below). USB (Is the TV firmware updated (Samsung needs an update to support Miracast until 2018).

Wi-Fi enabled on your phone|Television and telephone are up to 5 meters away.|Screen Mirroring is activated on TV|Disabled. VPN Power saving modes on Xiaomi-->

2. Google Cast (Chromecast): for streaming video and music

If you need to stream content from apps (YouTube, Netflix, Wavve) rather than duplicate the entire screen, use Google Cast. This protocol is optimized for media files: it supports 4K HDR and Dolby Atmos, whereas Miracast is often limited to 1080p resolution.

Instructions for Xiaomi:

1. Make sure your phone and TV are connected to the same Wi-Fi network (unlike Miracast, this is a must!).
2. Open an app that supports Cast (like YouTube).
3. Slip on the broadcast icon (📡) and select your TV from the list.
4. To duplicate the entire screen: open Settings → Connect → Screen Transfer → Google Cast.

If the Cast icon is not active:

• 🔄 Restart your router (sometimes) DHCP-The server does not provide the correct IP-multicast).
• 📱 Update the app (for example, Netflix only added Cast support from version 7.0).
• 🛠️ On the TV, turn on the Permit Cast option (on the LG It's the settings. → General. → Devices → TV Cast).

⚠️ Attention: On Xiaomi TVs TV Google Cast may not be supported in 2020, and you may need an external adapter like Xiaomi Mi. TV Stick (cost) ~2000₽).

Wireless broadcasting (Miracast)|Google Cast (Chromecast)|Wired connection (HDMI)|Never plugged in.-->

3. Wired connection via HDMI: for minimal delays

If you need maximum stability (for example, to watch movies in the UK) 4K@60fps Or games with Xiaomi Black Shark, use it. HDMI-This method guarantees less latency. 20 MS and supports all formats HDR. However, you will need an adapter, as modern Xiaomi smartphones are deprived of port HDMI.

What you need to connect:

• 🔌 adapter USB-C → HDMI (We recommend the original Xiaomi USB-C to HDMI Adapter or Anker Certified).
• 📺 Cable HDMI 2.0 or later (for 4K necessarily!).
• ⚡ Power supply for adapter (some models require charging connection).

Step-by-step:

1. Connect the adapter to the USB-C port of the smartphone.
2. Connect the adapter to the TV with an HDMI cable.
3. On the TV, select the signal source (HDMI 1/2).
4. On the phone in the Settings menu → Screen → Screen → Screen resolution set 1080p or 4K (if TV supports).

⚠️ Attention: Cheap adapters (<500₽) often 4K And they give away artifacts when you watch a video. Check for a DisplayPort chip in the specs (e.g., Moshi). USB-C to HDMI).

💡

If the image on the TV is cropped at the edges, on the phone turn on the No stretch mode in the settings HDMI-Adapter (usually available in the Developer Menu).

4.Wi-Fi Direct: Miracast alternative for older TVs

Wi-Fi Direct is a technology that allows devices to connect directly without a router. It's useful if your TV doesn't support Miracast, but there's a Screen Mirroring feature. This is how many 2016-2019 Sony models connect, for example.

How to set up Wi-Fi Direct on Xiaomi:

1. On your TV, activate Wi-Fi Direct (on Sony: Settings → Network → Wi-Fi Direct).
2. On the phone, open Settings → Wi-Fi → Additional → Wi-Fi Direct.
3. Select the TV from the list and confirm the connection (the password is usually displayed on the TV screen).
4. Run the broadcast through Settings → Screen Transfer → Wi-Fi Direct.

Limitations of the method:

• ⚠️ Maximum authorization — 1080p@30Hz (no support 4K).
• ⚠️ Delay up to 200 ms (not suitable for gaming).
• ⚠️ On some TVs. LG You need to turn off Bluetooth before connecting.

5. Connection via DLNA: for Photos, Videos and Music

If you don’t need to duplicate the screen, but only broadcast media files (photos, videos, music) – use DLNA. This protocol supports all Xiaomi smartphones and most TVs. The main advantage is that there is no binding to specific applications (as in Google Cast), you can transfer any files from the gallery.

Instructions:

1. On your TV, turn on DLNA (on Samsung: Settings → General → External Devices → DLNA Devices).
2. On your phone, install the Mi Home or BubbleUPnP app (for advanced features).
3. In the application, select the file and tap Translate → specify the TV.

Tips for stable work:

• 📁 Transmit the file format MP4 (H.264) or MKV — They're supported by all TV.
• 🔗 If the video slows down, reduce the bitrate in the application settings (optimal: 10-15 Mbit/s).
• 🔌 For 4K-Files use a wired connection or router with Wi-Fi 6.

💡

DLNA doesn't duplicate your phone's screen, it only transfers media files. Use Miracast or HDMI to mirror your screen.

6. Problem Solving: Why the Connection Is Not Working

If none of these methods worked, check out these points:

If the problem persists:

1. Update the TV firmware (on LG and Samsung, Miracast bugs were fixed in the 2022-2023 updates).
2. Reset your network settings on your phone (Settings → System → Reset → Reset Wi-Fi settings).
3. Try another connection method (for example, if Miracast doesn’t work, use HDMI).

FAQ: Frequent questions about connecting Xiaomi to a TV