How to turn it on WPS on Xiaomi devices: TVs, routers and smartphones

Function WPS (Wi-Fi Protected Setup allows you to connect to a wireless network without entering a password - just press a button on the router or enter PIN-On Xiaomi devices (TVs, routers, smartphones) this mechanism works differently, and in some models it has to be turned on manually. WPS, including hidden settings and solutions for devices without a physical button.

It is important to understand that WPS It's not always on by default, because the manufacturer can turn it off for security reasons. 4A The new feature is hidden in the advanced settings, and on TVs Mi TV It's a firmware version-based support, and we tested all the methods on the right devices (2023-2026) and put together nuanced work instructions.

If you are trying to connect a printer, smart speaker or other device through WPS, But the button on the router doesn't respond -- don't blame the technology. It's probably the network settings or the protocol version that's the problem. Then you'll find solutions for all scenarios, including cases where you can't get the technology right. WPS not available on the router menu, but is physically supported by hardware.

What is WPS and why is it needed for Xiaomi?

WPS (Wi-Fi Protected Setup is a standard for easy Wi-Fi connectivity designed for devices without a keyboard (printers, TVs, smart lamps) and instead of entering a password, it is used to use a keyboard:

• 🔘 Button on router – pressed physically or via web interface.
• 🔢 PIN-code – 8-digit code that is entered on the connected device.
• 📱 NFC — It is rare, but some Xiaomi models support it (e.g. Mi Router). 4C s NFC-marker).

On Xiaomi devices WPS is often used for:

• 🖨️ Connections of Xiaomi MiJia printers or third-party printers (e.g. Canon, HP).
• 📺 Synchronization of Mi TVs TV router-free.
• 🔌 Quickly add smart devices (Yeelight, Aqara) to the Mi Home ecosystem.
• 🎮 Connections of gaming consoles (PS5, Nintendo Switch, if they support the Switch WPS.

However, the technology has significant disadvantages:

• ⚠️ Vulnerability to brute force — PIN-You can find the code in a few hours (especially on old routers).
• ⏳ Limited activation time – after pressing the button WPS It works only 2-5 minutes.
• 🚫 Incompatibility with WPA3 — modern networks WPA3 switch off WPS default.

⚠️ Note: If your Xiaomi router is released before 2019 (e.g. Mi Router 3), WPS It may be enabled by default, but it is not secure. We recommend disabling the feature after use or updating the firmware to the latest version.

How to turn it on WPS Xiaomi routers (Mi Router, Redmi Router)

On Xiaomi routers WPS It's activated either through a physical button or a web interface:

If your router has a physical button WPS, simpler:

1. Press the button. WPS on the router (usually signed or combined with the Reset button).
2. Activate within 2 minutes WPS on a connected device (for example, on a printer or TV).
3. Wait for synchronization – the Wi-Fi indicator on the router should flash green.

If there is no button, turn it on. WPS web-based:

1. Connect to the router network from a computer or smartphone.
2. Open your browser and type 192.168.31.1 (or miwifi.com).
3. Log in (the default login and password is often admin).
4. Go to the Wi-Fi section → Settings WPS (or additionally → Simplified connection).
5. Press Enable. WPS And follow the instructions on the screen.

Make sure the router is connected to the internet.|Check that Wi-Fi is on and distributes the network|Update the router to the latest version|Turn it off. VPN plug-in-->

⚠️ Attention: On Xiaomi routers with MiWiFi firmware ROM past 2021 WPS It might not work because of a bug. So, the solution is to update the software through Settings. → Update the firmware or reset the router to factory settings (reset button for 10 seconds).

WPS on Xiaomi TVs (Mi) TV, Redmi TV)

Xiaomi TVs are supported by WPS only if:

• 📶 Router gives the network away in mode 802.11n or 802.11ac (not 802.11ax/Wi-Fi 6).
• 🔒 In the settings of Wi-Fi TV enabled mode WPA2-PSK (not WPA3).
• 📱 TV firmware updated to version MIUI TV 3.0 or newer.

To connect via WPS:

1. On the TV remote, click Settings. → Network and Internet → Wi-Fi.
2. Select your network and click on Additional Settings (or Connect via WPS).
3. On the router, activate. WPS (button or via web interface).
4. On the TV, wait for the message Connected (usually takes 10–30 seconds).

If you have the option to connect through WPS absent:

• 🔄 Restart the TV (Settings) → On TV. → Reboot).
• 📋 Check if your router supports WPS (See the table in the previous section).
• 🔧 Reset network settings on the TV: Settings → Network and Internet → Resetting the network.

On new models, Mi TV Q2, Redmi Smart TV X) WPS often shut down due to the transition to WPA3. In this case:

• 🔒 In the router settings, temporarily switch to WPA2-PSK.
• 🔄 Connect the TV through WPS, then return WPA3 backwards.

WPS on Xiaomi smartphones (Redmi, Poco, Mi)

Xiaomi smartphones (based on) MIUI HyperOS does not support Wi-Fi connection WPS So you can't click on the phone, "Connect through." WPS" It can sync with the router, but the smartphone can distribute Wi-Fi from the router. WPS For other devices (for example, for a printer).

To turn on WPS point-of-access:

1. Open the Settings. → Access Point and modem → Portable access point.
2. Activate the access point and click the access point settings.
3. Scroll down and turn on the option. WPS-connection (if any) if there is one).
4. On a connected device (such as a printer), select the phone network and activate WPS.

If options WPS-No connection:

• 📱 Your smartphone doesn’t support you. WPS access point mode (relevant for models older than 2018).
• 🔧 Use alternative methods: QR-code, Bluetooth or manual password entry.

On some firmware (e.g, MIUI 12–14) WPS It's hidden in developer mode:

1. Activate Developer Mode: Settings → About Phone → MIUI version (click 7 times).
2. Back to Settings → Additionally. → For developers.
3. Find the option to Enable WPS At the access point and activate it.

Problems with WPS Xiaomi and their solutions

If WPS It does not work, the reasons may be as follows:

If none of these methods worked, try alternative ways to connect:

• 📷 QR-Code – many Xiaomi routers generate QR For fast connection (wi-fi section) → QR-code).
• 🔗 WPS via the application – in Mi Home or Xiaomi Router there is a function “Connect the device without a password".
• 🔑 Guest Network – Create a separate network without a password for a temporary connection.

💡

If your Xiaomi router does not support WPS, But you need to connect a device without a password -- use the One-Tap Connection feature in the Xiaomi Router app. WPS, But uses cloud authorization through your Mi Account.

Security WPS: worth using?

Despite the convenience, WPS It's considered an insecure protocol:

• 🔓 Vulnerability PIN-8-digit code can be selected in 4-10 hours (reaver or Wash attack).
• 🕳️ Lack of encryption – when activated WPS The router temporarily opens the network.
• 🔄 Attacks through PBC — if WPS physically accessible, an attacker can connect to the network.

Safety recommendations:

• 🔒 Turn it off. WPS after use - in the router settings or physically (if there is a switch).
• 🔄 Update the firmware – in new versions Xiaomi closes vulnerabilities WPS.
• 🛡️ Use it. WPA3 — If your devices support you, go to them (WPS and then it's automatically shut down).
• ⏳ Limit activation time – don’t leave it. WPS plugged in.

If you are critically important to safety (such as in an office or public place), it is best to refuse to do so. WPS favorably:

• 📱 Connections through QR-code (available in Mi Home and new routers).
• 🔑 Complicated Wi-Fi password (12)+ symbols with numbers and special signs).
• 🔗 VLAN or guest network for smart devices.

💡

WPS It is convenient for one-time connection of devices without a screen (printers, lamps), but is not suitable for permanent use.

Alternatives WPS for Xiaomi devices

If WPS It doesn’t work or you’re not happy with its safety, use alternative methods:

For example, to connect a printer Xiaomi MiJia without WPS:

1. Install the Mi Home app on your smartphone.
2. Add a printer through the devices → Add → printer.
3. Select the option to Connect via Wi-Fi (without password).
4. Follow the instructions on the screen – the application itself will transmit the network data to the printer.

For Mi TVs, TV alternative WPS — Connection via Mi Remote:

1. Install Mi Remote on your smartphone.
2. Choose a TV model and follow the Connection Wizard.
3. The app will automatically transfer Wi-Fi data to the TV via Bluetooth.

FAQ: Frequent questions about WPS on Xiaomi