How to turn on the transceiver on the Xiaomi phone: NFC, FM-radio and Bluetooth

The transceivers in Xiaomi smartphones are responsible for wireless communication, from transferring files over Bluetooth to contactless payments over NFC and listening to radio without the Internet. However, many users are faced with the fact that these modules are either disabled by default or hidden in the depths of settings. In this article, we will discuss how to properly activate each type of transceiver on different models of Xiaomi, Redmi and POCO, and solve typical problems with their work.

It is important to understand that not all Xiaomi smartphones are equipped with the same modules, FM-Radio is physically absent in most flagship models (e.g. Xiaomi 13 Pro) and NFC It can be blocked in regional firmware, and we'll take a detailed look at how to check if a module is in your device and what to do if it's not in the settings list.

The article will be useful for both beginners and experienced users: here you will find not only basic instructions, but also hidden chips (for example, how to turn on the keyboard). FM-So, you can start with the most popular one, which is the module, and you can set up Bluetooth 5.3 for the minimum power consumption. NFC, It is often ignored, although it provides access to contactless payments, tags and even smart home management.

1. How to enable NFC on Xiaomi: step-by-step instructions

The NFC (Near Field Communication) module in Xiaomi smartphones is used for contactless payments (Google Pay, Mi Pay), tag reading and connection to smart devices, but by default it is turned off — this is done to save battery life.

1. Open Settings and go to Connect and Sharing (or Wireless Networks in older versions of MIUI).
2. Tap on point. NFC. If it is not, then your model does not support the technology (see the list of compatible devices below).
3. Translate the slider to the "On" position. You can additionally activate the default Payment option if you use contactless cards.

After turning on, check the operation of the module: bring the phone to the payment terminal or NFC-If nothing happens, make sure that:

• 🔋 Battery level above 15% (at low charge) NFC may automatically shut down).
• 📱 There is no case with metal inserts on the phone - they screen the signal.
• 🔄 You have updated the firmware to the latest version (in older versions). MIUI were bugs with NFC).

Make sure the module is enabled in the settings

Try bringing your phone to the payment terminal.

Check if there are any metal interference (cover, keys)

Update. MIUI up-to-date-->

Attention! On some models (e.g. the Redmi Note 10 Pro for the Indian market), NFC can be blocked software, in which case only flashing to the global version of MIUI or using custom recovery will help.

2. FM-Radio on Xiaomi: how to turn on without the Internet

Unlike in the past. NFC, FM-The radio in Xiaomi smartphones requires not only software activation, but also hardware support. 12T or POCO F4 GT), It is also used in budget and mid-budget models (e.g. Redmi). 9A, POCO M4 Pro).

To turn on the radio:

1. Connect wired headphones – they act as an antenna (without them, the radio will not work!).
2. Open the app. FM-Radio (if not available, download the official Mi Radio app from Google Play).
3. Click Scan, the phone will find available stations. If the scan does not begin, check if the module is turned on in the settings:

Settings → Appendices → Application Management → FM- Radio → Permissions → Enable access to the radio module

If the application FM-The radio is not on the menu, which means your model doesn't support the function. FM-module:

Important: On models with Snapdragon processor 8xx (For example, Xiaomi 12 Pro) FM-radio is disabled at the chipset level – it can not be activated even through the engineering menu.

💡

If the radio is jammed, try using headphones with a longer cable, which will improve signal reception.

3. Bluetooth on Xiaomi: Enablement and hidden settings

The Bluetooth module in Xiaomi smartphones is usually turned on by default, but it depends on the protocol version (4.2, 5.0, 5.2 or 5.3) and the firmware.

1. Open Settings → Bluetooth.
2. Turn the slider to the "On" position. If Bluetooth is not turned on, try resetting the network settings:

Settings → System → Resetting settings → Resetting network settings

To improve the stability of the connection (especially with headphones or smartwatches), it is recommended to:

• 🎧 Update the device firmware and firmware Bluetooth accessory.
• 🔄 Enable Low Latency Mode (available in Bluetooth settings for supported devices).
• 📶 Turn off Wi-Fi if you use Bluetooth 4.2 – these modules can conflict.

Attention! Some models (such as the Redmi Note 8 Pro) have problems connecting to car radios after upgrading to MIUI 13, so the solution is to roll back the firmware or use the Bluetooth Auto Connect app from Google Play.

Headphones

Smart watches

Car tape recorder

Game controller

Other-->

4.Transmitter Problems: Why NFC/Bluetooth/FM Doesn't Work

If the transceiver is not turned on or is unstable, the reasons can be both software and hardware.

4.1 NFC does not detect devices

• 📱 Problem: The phone doesn't see bank cards or tags.
• 🔧 Solution: Check if it's on. NFC In Settings → Connect and share. Make sure the touchpoint is at the top of the phone (usually next to the camera).Update the Google Pay or Mi Pay app.

4.2. Bluetooth is permanently shut down

• 📱 Problem: Connection breaks in a few minutes.
• 🔧 Solution: Turn off power saving mode for Bluetooth in Settings → Battery → Select applications. Reset network settings (see instructions above). Try to connect in Developer Mode (turned on taps on Version). MIUI phone-setting).

4.3. FM-radio's not finding the station

• 📱 Problem: Scanning does not give results.
• 🔧 Solution: Use headphones as an antenna (required!). Check if your model supports FM (Install an alternative application, such as NextRadio.

⚠️ If none of the solutions worked, there may be a hardware malfunction (e.g., an antenna damage after a phone crash) and a diagnosis at a service center is required.

5. Hidden Transceiver Functions on Xiaomi

Beyond the basic features, the transceivers in Xiaomi smartphones support a number of hidden features that few people know about.

5.1 Use of NFC for Automation

With the Mi Home or Tasker app, you can program NFC-tags:

• 🔑 Attach the phone to the tag on the door - Wi-Fi will automatically turn on and the Smart Home app will open.
• 🚗 Touch the tag in the car – the navigator will start and Bluetooth will connect to the tape recorder.

5.3. FM-radio without headphones (only for some models)

On individual devices (for example, Redmi 9C) you can activate the radio without connected headphones through the engineering menu:

##36446337## → Hardware Testing → FM Radio → Enable

⚠️ Attention, the wrong actions in the engineering menu can cause a system failure. Use this method only if you are sure of your actions.

Xiaomi models without transceivers: what to do?

If your Xiaomi model does not support the desired module (for example, it is not available). NFC or FM-radio, there are a few workarounds:

Alternatives to NFC

• 💳 Use contactless payments for your QR-codes (SberPay applications, Tinkoff).
• 🔗 Mi Share (analogue of AirDrop) is suitable for transferring files between devices).

6.2 Replacement FM-radio

• 🎵 Listen to radio via Internet applications (Radio Garden, TuneIn Radio).
• 📻 Connect the outside. FM-transmitter USB-C (Xiaomi Mi Radio Receiver).

Improvement of Bluetooth

If your smartphone is equipped with an outdated version of Bluetooth (for example, 4.2), for stable work with modern accessories:

• 🔄 Use Bluetooth 5.0 adapters (connect via USB-C).
• 🎧 Choose headphones with support for aptX – this codec works better with older versions of Bluetooth.

Before buying external adapters, make sure they are compatible with your Xiaomi model. Some cheap devices may conflict with MIUI.

7. Safety when using transceivers

Transceivers, especially NFC and Bluetooth, can become vulnerable to hacker attacks.

• 🔒 Turn it off. NFC, When you're not using contactless payments, this will prevent unauthorized card readings.
• 🔄 Do not connect to unknown Bluetooth devices (such as in public places) and attackers can use them to spread malware.
• 📱 Update. MIUI Regularly – new versions close vulnerabilities in communication protocols.
• 🛡️ Use it. VPN Connecting to public Wi-Fi via Bluetooth hotspot.