How to turn it on 5G Xiaomi: all the ways and hidden settings

Fifth-generation high-speed internet has long ceased to be exotic, but many Xiaomi smartphone owners still can not fully take advantage of its advantages. 5G, This article will help you understand everything from checking network support to fine-tuning connection parameters.

We're not going to be limited to standard tips like "reset your phone." Instead, you're going to learn how to make it work. 5G work even on those devices where the option is hidden in the engineering menu, which SIM-Maps do support a new network, and why speeds sometimes stay at the same level. 4G And then we'll also try to get rid of the myths about influence. 5G battery and processor heating.

Not all Xiaomi smartphones are physically capable of connecting to the 5G. If your model is released before 2020 (for example, Redmi Note 8 Pro or Mi). 9T), There's no hardware support, no customization is going to help, but even among relatively new devices, there's a nuance: some versions for different regions may have limited band support. 5G.

Another important thing is the telecom operator. 5G While it is currently only available in test mode from some providers (for example, MTS in Moscow or Tele2 in Sochi), in other CIS countries the situation may differ. 5G in your area and whether a special tariff or replacement is required to activate it SIM-map.

1. Verification of support 5G on your Xiaomi

Before trying to turn on 5G, Make sure your smartphone is capable of working with that network at all. Here's how to do it as reliably as possible:

Method 1: Model of the device

The easiest way is to check the specifications of your model on the official Xiaomi website or on resources like GSMArena. 5G: Yes or supported ranges are listed (e.g, n1/n3/n5/n7/n28 etc.).

Method 2: Through Android Settings

Open the Settings. → The phone. → All characteristics: Network or cellular should show support information 5G. If this is not the case, your device is not compatible with the new network.

Method 3: Verification IMEI

Unique device identifier (IMEI) It can tell you about network support, you can find it by command *#06# or by settings. IMEI on sites like imei.info – the results will indicate whether the device supports 5G.

Attention to ranges! even if your Xiaomi supports 5G, This does not guarantee that your carrier’s network will be available, for example, some models for the Chinese market (Mi 10 Ultra) do not support European ranges. n78 (3.5 GHz), which are used in Russia.Clarify with the operator what ranges 5G are used in your area, and check with the characteristics of the phone.

Preparation SIM-card 5G

Even if the smartphone supports 5G, old-fashioned SIM-The map can be an obstacle. Here's what you need to do:

✅ Check the type SIM-map

5G demand USIM (or 4FF The latest generation of nano-SIMs. SIM Mini-SIM format (2FF) or even some micro-sims (3FF) They don't support new communication standards.

✅ Activate the service 5G operator

Some providers (for example, Beeline or MegaFon) 5G demand:

• 📱 Replacements SIM New (often free in the salons)
• 💳 Connecting a special tariff or option (sometimes paid)
• 📡 Locations in the coverage area (check the map) 5G operator's website)

✅ Set up the right slot for SIM

If you have a two-sim Xiaomi, make sure that you have a 5G-SIM inserted into the main slot (usually SIM Some models (e.g. Redmi Note 11 Pro)+ 5G) support 5G only on the first slot.

💡

Before the replacement SIM Save your contacts to your Google or Mi Account – when you transfer them to a new card, they will not automatically be saved.

How do you know that SIM ready 5G?

Call the operator or check your personal account - there should be information about support 5G. Alternative method: insert SIM snuff 5G (If you have a network, it's a problem with your Xiaomi settings, if you don't, it's your fault. SIM operator.

3. Inclusion 5G standardized MIUI

If the smartphone and SIM-card 5G, It's time to move on to settings. Most of the time, a few steps are enough:

1. Open Settings. → SIM-maps and mobile networks.

2. Choose your own. SIM-card (if there are several).

3.Tap on the network type (or preferred network type).

4. Choose from the list 5G (or 5G/4G/3G/2G switch-over).

After that, an icon should appear in the status bar 5G (or 5G+, 5GE If you don't have one, try rebooting your phone or turning on/off Flight Mode.

Network type selected 5G customized|Badge 5G appeared in the notification panel|Internet speed has increased (check on speedtest.net)|No switching to 4G cover-zone-->

⚠️ Attention.

On some firmware MIUI (especially global versions for Europe 5G It may not be on the menu, even if it's network-supporting, and you'll have to use an engineering menu or code. USSD — Read about it in the next section.

After inclusion 5G The smartphone started to warm up more or discharge faster — that's normal. 5G It consumes more power, especially in low signal conditions. To save charge, you can turn on the Smart option. 5G (If it is in the settings, it automatically switches to 4G, When high speed is not required.

4. Hidden ways of inclusion 5G (If the option is not on the menu)

Sometimes the manufacturer hides the settings. 5G It's deep in the system, or it's blocking it for certain regions:

Method 1: Engineering menu (for experienced users)

1. Open the Phone app and enter the code: ##4636##.
2. In the menu that opens, select Phone Information.
3. Scroll down to Set preferred network type.
4. Choose. NR/LTE/WCDMA or NR only if there is).

Method 2: Codes USSD compulsory

Some operators provide special commands:

• 📶 For MTS: *545# → check-in 5G.
• 📶 For Beeline: *110*18# → activation.
• 📶 For MegaFon: *105*500# → plug-in.

Method 3: Edit the build.prop file (root only)

⚠️ This method requires unlocked bootloader and root rights. Wrong actions can lead to a device blink.

If you are prepared for risk, add to the file. /system/build.prop line:

ro.telephony.default_network=22

where 22 is a priority for 5G. After saving, restart the phone.

5. Why? 5G Not working: Diagnosing problems

You're on. 5G, But the network never came along? Here are the most common causes and solutions:

🔍 Diagnostics through the Engineering Menu

Check if the phone is “seeing” the network 5G, Enter the code ##4636:

1. Go to Phone Information.

2. look at the Network Type line - if there is NR5G, the module is operating but the connection is not established for another reason (e.g., operator locking).

📡 Checking ranges

Find out what ranges 5G uses your operator (for example, n78 For MTS in Moscow, and compare with the supported Xiaomi. If there are no matches, the network will not work. The list of ranges of the phone can be found in the specifications or through the Network Signal Guru app (available on the Play Market).

Optimization of work 5G: speed, heat, battery

5G It's not only speed, it's also new challenges: fast discharge, overheating, unstable connection:

🔋 Saving the battery without losing speed

• 📉 Turn on Adaptive Switching 5G/4G (if there is in the settings).
• 🔄 Turn off background data transfer for unnecessary applications.
• 🌙 Activate the Dark Theme – it reduces the load on the processor.

🔥 Reduced heating

5G-module (especially Qualcomm) X55/X60 Xiaomi’s flagships are warmer than 4G. To reduce the heat:

• ☀️ Do not use your phone in direct sunlight.
• 🎮 Limit online games when active 5G.
• 🧊 Install Coolify app to control temperature.

🚀 Maximum speed

To squeeze out 5G everything:

• 📶 Use an external antenna (e.g. Xiaomi Mi WiFi Antenna) in low signal areas.
• 🔗 Turn it off. VPN — It can limit speed.
• 📱 Enable Developer Mode and activate Debugging by USB (Sometimes it eliminates the lags).

💡

If you support Xiaomi 5G, but the network is unstable, try manually selecting the range in the engineering menu (#4636## → Set preferred network type → NR This can help in areas with congested towers.

Frequent questions about 5G Xiaomi