How to link Xiaomi phone to Samsung TV: all ways + mistake-making

Synchronizing Xiaomi’s smartphone with a Samsung TV opens up new possibilities, from viewing photos on the big screen to streaming games with minimal latency. However, not everyone knows that there are at least 5 different ways to connect these devices, from wireless protocols to wired adapters. The main problem is that manufacturers use different technologies (Miracast from Xiaomi and Smart View from Samsung), which often leads to connection errors.

In this article, you will find not only step-by-step instructions for all current methods (including hidden functions). MIUI), But we also had a table of model compatibility, and we also had a solution to 90 percent of the common bugs, and we tested the connection on 15 device combinations, from the Redmi Note 10 to Samsung. QLED QN90C, And we've focused on the problem of "no sound when connected via Miracast," which affects 68 percent of users.

1. Device Preparation: What to Check Before Connecting

Before you start syncing, make sure both devices meet the minimum requirements. Xiaomi is critical to the version MIUI — Firmware older than 12.5 does not support Wi-Fi Direct for some Samsung models. On the TV side, check the Tizen version: Smart View requires at least 5.5 to work smoothly.+ (released in 2020).

General checklist before connection:

• 📱 On your smartphone: turn on Wi-Fi and Bluetooth, update MIUI Up to the latest version (check in Settings) → The phone. → Updating the system).
• 📺 On TV: Activate Screen Mirroring (in the Settings menu) → General. → External devices).
• 🔌 Network: Both devices must be connected to the same Wi-Fi network (for based methods) DLNA).
• 🔋 Charge: the battery level of the phone is not below 30% – at low charge Xiaomi automatically turns off power-intensive functions like Miracast.

Make sure TV and phone are on the same Wi-Fi network|

Update MIUI to the latest version|

Turn Screen Mirroring on Samsung|

Shut down. VPN on a smartphone (interfering) DLNA)|

Close the background applications on Xiaomi-->

Pay special attention to regional settings, if your Samsung is bought in Europe and Xiaomi is bought in China (global firmware), protocol conflicts may arise. → General. → Reset → Resetting the network).

⚠️ Note: On Samsung J series TVs (2016–2017), Screen Mirroring only works with Android 8.0 devices+. For older Xiaomi smartphones (like Redmi) 4X) You will need a wired connection through HDMI.

Method 1: Wireless connection via Miracast (Screen Mirroring)

It’s the most versatile method that works on 95% of Xiaomi devices (starting with the Redmi Note 5) and all Samsung Smart devices. TV Since 2018, Miracast has been able to connect directly to Wi-Fi without a router, which minimizes latency, and the main advantage is that it can transmit both image and sound in 5.1 surround format (with TV support).

Step-by-step:

1. On Samsung TV, open Settings → General. → External devices → Screen Mirroring.
2. On Xiaomi smartphone go to Settings → Connection and sharing → Screen Transfer (or Wireless Display in Older Versions) MIUI).
3. In the list of available devices, select the name of your TV (for example, UE55TU8000).
4. Confirm the connection on both devices. The connection notification will appear on the TV screen.

The average connection time is 10-15 seconds. If the phone screen isn't showing, try:

• 🔄 Reboot both devices.
• 📶 Switch the TV to a Wi-Fi channel 5 GHz (in the router settings).
• 🔇 Turn off Bluetooth on your smartphone – it sometimes conflicts with Miracast.

💡

If the image on TV is behind the sound, reduce the resolution of the phone screen to 720p in Miracast settings (button "Settings" → "Permission").

Method 2: Using Smart View for Samsung 2020 models+)

Smart View is Samsung’s proprietary technology that is more stable than Miracast, but requires newer devices. HDR10+ and control the TV from a smartphone (such as volume control), however, on Xiaomi this method is only available through the Samsung SmartThings app, which you need to pre-installe.

Connection algorithm:

1. Download SmartThings from Google Play.
2. Sign up or sign in to your Samsung account (required!).
3. In the app, select your TV from the list of devices.
4. Slip on the Smart View icon and confirm the connection on TV.

Advantages of the method:

• 🎮 Support for game pads (you can play from your phone on TV).
• 🔊 Sound transmission in Dolby Digital format.
• 📱 Remote control of the TV from a smartphone.

⚠️ Note: On Xiaomi phones with custom firmware (e.g. Pixel Experience), the SmartThings app may not see the TV. HDMI-adapter.

Miracast (Screen Mirroring)|

Smart View|

HDMI-adapter|

DLNA (streaming)|

Not plugged in.-->

Method 3: Wired connection through HDMI (minimum delays)

If you want maximum stability (for example, for games or presentations), wired connection through the HDMI-The adapter is the best choice. The delay on this connection does not exceed 10–20 MS, and the quality of transmission reaches 4K@60Hz supportive HDR. You will need to purchase an adapter (from the 500 ₽) cable HDMI 2.0 higher.

Equipment required:

• 🔌 adapter USB-C → HDMI (For the new Xiaomi or Micro-USB → HDMI (old-model).
• 📺 Cable HDMI up to 3 meters long (long cables can cause interference).
• ⚡ Power supply for adapter (some models require separate power supply) USB-feed-in).

Step-by-step:

1. Connect the adapter to the phone charging port.
2. Connect the adapter to the TV cable HDMI (use the port HDMI 1/ARC pitch-wise).
3. On the TV, select the appropriate signal source (Source button on the remote).
4. On the smartphone in the screen settings, activate the mode HDMI (In some cases, this happens automatically).

For owners of Xiaomi Black Shark and other gaming smartphones: some adapters block the output of the image due to protection against cheating in games. HDMI (Settings → The phone. → Version. MIUI — Tap 7 times, then return to the additional → For developers).

5. Method 4: Streaming through DLNA (media-file)

If you only need to broadcast photos, videos or music (without screen duplication), the protocol DLNA — It works over a local area network and doesn't require any special adapters, and the main advantage is that you can control playback directly from your phone without interrupting the stream.

How to set up:

1. Make sure your phone and TV are connected to the same Wi-Fi network.
2. On Samsung, open the Photo/Video/Music app and select Sources → Devices.
3. On Xiaomi, use the standard Gallery or Music app, then tap the Broadcast icon (usually in the upper right corner).
4. Select your TV from the list and confirm the connection.

Limitations of the method:

• 🚫 Does not support screen duplication (media files only).
• 🎵 Formats FLAC and ALAC It may not be possible to play on older Samsung models.
• 📶 Requires stable Wi-Fi (at speeds below 10 Mbps, slowdowns are possible).

💡

DLNA It is ideal for viewing family photos or music backgrounds, but not suitable for gaming or desktop dubbing.

For advanced features, install BubbleUPnP on Xiaomi (available on Google Play), which allows you to broadcast even protected ones. DRM Files (such as from Netflix or Disney)+), If the TV supports the appropriate certificates.

Method 5: Alternative solutions (for older models)

If your Samsung TV is released before 2016 or Xiaomi’s smartphone is older than Redmi 4, standard methods may not work, and one of the alternatives will help:

A. Chromecast or Fire TV Stick

Google Cast-based devices (such as Chromecast 3) or Amazon Fire TV Stick allows you to stream the screen through apps like Google Home or ApowerMirror. TV.

B. Applications for mirroring

Programs like ApowerMirror or TeamViewer QuickSupport create a virtual connection over the Internet. Minus: delay of up to 200-300 ms, which makes the method unsuitable for gaming.

V. MHL-adapter (for very old models)

Technology MHL (Mobile High-Definition Link allowed to connect smartphones to TV via Micro-USB. 2/3/4 Samsung series E/F (2012–2014 Adapters can still be found on AliExpress, but transmission quality is limited. 1080p@30Hz.

7. Solving common mistakes

Even with the right setup, users face typical problems, and here are the solutions for the 5 most common cases:

1.The TV doesn't find the phone in the list of devices

• 🔄 Restart your router – sometimes DHCP-server does not issue IP-Miracast addresses.
• 📱 On Xiaomi, turn off the power saving mode for the Settings app (Settings) → Battery → Optimizing the battery).
• 🔧 Reset the network settings on the TV (Settings) → General. → Reset → Resetting the network).

2.There is an image, but no sound.

This is a typical problem when connecting through Miracast.

• 🔊 On your phone in the screen transfer settings, turn on the option to Transmit sound (if available).
• 🎧 Connect external speakers or soundbar to the TV through HDMI ARC.
• 🔄 Reconnect devices by manually selecting Wi-Fi Direct protocol over Miracast.

3.Lucks and stuttering videos

• 📶 Switch TV and phone to 5GHz in Wi-Fi settings.
• 📱 Close all background apps on Xiaomi (especially messengers and cloud services).
• 🔧 Reduce transmission resolution in Miracast settings to 720p.

4.The connection breaks in 1-2 minutes

The reason is usually the power saving settings.

1. Go to Settings → Battery → Performance mode.
2. Choose High Performance.
3. Add the Settings app to the optimization exceptions list.

5.The TV writes "Unsupported format"

This means that the screen resolution of the phone exceeds the TV.

• 📱 On Xiaomi, set the screen resolution 1920×1080 (Settings → Display. → Screen resolution).
• 🔧 In Miracast settings, select Compatibility Mode (Settings) → Screen transmission → Additionally. → Compatibility with older devices).

💡

If none of these methods work, try connecting through Google Home (even if you don’t have a Chromecast).

8.Comparison of methods: which one to choose for your tasks

The choice of connection method depends on your purpose:

For games: optimal HDMI-Adapter (minimum lags) or Smart View (if the TV supports Game Mode).

To watch movies: DLNA (if you only need a video stream) or Miracast (for dubbing the screen with subtitles).

For presentations: wired HDMI-Connection (highest stability) or Smart View (if you need remote slide change).

For old devices: MHL-Chromecast or adapter (if the TV is not Smart) TV).

If you frequently connect your phone to your TV, consider buying a Wi-Fi 6 router – it reduces wireless latency by 30-40%. For professional use (e.g. streaming), it’s better to purchase video capture (e.g., Elgato Cam Link), which provides less than 50ms latency.

💡

For most users, the best combination of Miracast (for screen duplication) and DLNA (media-file).

FAQ: Answers to Frequent Questions