How to reset your network settings on Xiaomi: full instructions with nuances

Reset network settings on Xiaomi smartphones (including Redmi models and POCO) — It's a procedure that helps you solve problems with your Wi-Fi connection, your mobile Internet connection, or Bluetooth, and often people are faced with a situation where the phone suddenly stops seeing familiar networks, doesn't connect to the Internet through the Internet. SIM-And in 80 percent of these cases, it's not hardware malfunctions that are to blame, but software malfunctions, and resetting them puts everything back on track.

In this article, we will not only discuss the standard way to reset via the settings menu, but also alternative methods (for example, using engineering code or through recovery mode). You will also learn what data will be lost after the procedure, how to prepare for it and what to do if the reset did not help. MIUI — 12 to 14 – because the interface and layout of menu items are different.

Important: Network resets are not the same as factory resets: the first one only affects connectivity (Wi-Fi, mobile network, Bluetooth), while the second one removes all data from the device. If your problem is purely network-related, start with the first one, which is faster and safer.

When you need to reset network settings on Xiaomi

Before you start the procedure, make sure it is really necessary. Here are the typical situations in which the reset helps:

• 📶 The phone doesn’t connect to Wi-Fi, although other devices see the network and work with it normally.
• 📵 Mobile Internet (4G/5G) not present, though SIM-Card active and balance positive.
• 🔄 Permanent connection breaks: Wi-Fi or mobile network appears, then disappears.
• 🔊 Bluetooth problems: devices can’t find each other or can’t connect.
• ⚡ After updating MIUI Internet lost or the quality of communication deteriorated.

If the problem only manifests itself with one particular network (for example, the phone does not connect to the Wi-Fi router at home, but works well with the mobile Internet), first try to forget this network in the settings and connect again.

⚠️ Warning: If the problem persists after reset, the cause may be a module malfunction Wi-Fi/Bluetooth Or mobile network antennas, and you'll need a diagnostic at a service center.

What will be deleted after resetting network settings

The procedure only affects the connection settings, and here's the full list of what's going to be erased:

This is not affected by:

• 📱 Personal files (photos, videos, music).
• 📞 Contacts, messages, call history.
• 🎮 Installed applications and their data.
• 🔐 Passwords from accounts (Google, Mi Account, etc.).

The only exception is that if you used the Network Backup feature in MIUI, these backups will also be deleted after the reset, so it is recommended to manually write down passwords from important Wi-Fi networks before the procedure.

Preparing for resetting: 5 important steps

To avoid problems after reset, follow these steps:

Write down passwords from all saved Wi-Fi networks|Check if you have access to SIM-map (PIN-code, if it is installed)|Disable important Bluetooth devices (such as smartwatches)|Download backup copies to your phone APN-configurations (can be found on your operator's website)|Make sure you have an alternative way to get online (like a second phone with mobile traffic)

-->

If you are using Xiaomi on a corporate network, check with the IT-setting VPN Or a proxy, you'll have to reset them once you reset them, and you'll also have to check if you have any services attached to your device. MAC-address (e.g. access to office Wi-Fi) in some cases after resetting MAC-The address of the network adapter may change and you will need to re-register the device.

For models with double SIM-A card (for example, Redmi Note 12 Pro)+ or POCO X5 Pro) note that the reset will affect the settings of both cards, if one is used only for calls and the other is used for the Internet, after the procedure, you may need to re-select the card. SIM for data transmission to Settings → SIM-maps and mobile networks.

Method 1: Reset via the settings menu (for MIUI 12–14)

This is the easiest and safest method. The instructions are suitable for most modern Xiaomi smartphones, including the Redmi 10/11/12 series, POCO F4/F5, Xiaomi 13/14, etc. The differences in the interface are minimal.

Steps for MIUI 14 (the path may be slightly different on older versions):

1. Open the Settings app (cog icon).
2. Scroll down and select About Phone.
3. Click General Settings (or Advanced Settings in some firmware).
4. Select Settings Reset.
5. Slip on Network Reset.
6. Confirm the action by entering PIN-code or pattern lock, if required.
7. Click Reset settings in the window that appears.

The phone will restart automatically. The whole process takes no more than 1-2 minutes.

• 🔐 Connect to Wi-Fi networks (enter passwords).
• 📶 Set up mobile internet (select) SIM For data, add if necessary APN).
• 🎧 Hide Bluetooth devices.

💡

If the mobile internet doesn’t work after a reset, check the APN settings. Often operators automatically send the configuration via SMS — just restart the phone and wait for the notification.

Method 2: Reset via engineering menu (code ##4636##)

This method is suitable for power users and can be useful if a standard reset through settings is not available for some reason.The engineering menu allows you to manage many hidden Android options, but requires caution - wrong actions can disrupt the device.

Instructions:

1. Open the Phone app.
2. Enter the combination: ##4636## (no spaces).
3. Select Phone Information (or Phone Information).
4. Scroll down to the Wi-Fi information block.
5. Click on the three dots in the upper right corner and select Wi-Fi reset.
6. To reset your mobile network, go back to the main engineering settings menu and select Mobile network settings, then Reset to default.

⚠️ Note: Some Xiaomi models (especially custom firmware) may have the engineering menu blocked, and if nothing happens after you enter the code, this method is not suitable for you.

The advantage of this method is that it allows you to reset settings selectively — for example, only Wi-Fi or only mobile network, but to completely reset all network parameters, it is easier to use the first method.

Method 3: Reset via Recovery Mode (if the phone is not turned on)

This method will come in handy if Xiaomi does not load in normal mode (for example, due to a failure after an update) or the settings menu is not available. Recovery Mode is a recovery mode that works even if there are serious software errors.

Instructions for Xiaomi with stock Recovery (not TWRP!):

1. Turn off the phone (press the power button for 10 seconds if it freezes).
2. Press and hold the Power + Volume buttons up until the Mi logo appears.
3. Release the buttons when the Recovery menu appears (English or Chinese).
4. Use volume buttons for navigation and power button for selection.
5. Select Wipe & Reset (or Clear Data in some versions).
6. Next, select Wipe Network Settings (if you don’t have one, choose Wipe All Data, but this will result in a complete reset!).
7. Confirm the action and wait for the process to be completed.
8. Select Reboot to reboot.

Importantly, Recovery Mode doesn't have a separate reset point for all models, so if you only see Wipe All Data or Factory Reset, you'll have to reset completely, so you'd better connect your phone to your computer and try to restore it to work using the Mi Flash Tool.

💡

If you are not sure about your actions in Recovery Mode, you should contact the service center. Incorrect choice of menu item can lead to loss of all data on the device.

What to do if the reset does not help

If problems persist after resetting your network settings, check the following:

• 🔧 Update the firmware: Go to Settings → The phone. → Update the system and install the latest patches. Often, network bugs are fixed in new versions. MIUI.
• 📡 Check it out. SIM-card: Try inserting it into another phone. If the problem recurs, contact the operator for a replacement card.
• 🔄 Change the network mode: In Settings → SIM-maps and mobile networks → Preferred network type, try manually selecting 4G or 3G (if 5G floundering).
• 🛠️ Reset the settings. APN: In the same section of mobile networks, find access points (APN), Click on three dots and select Reset to default values.

If none of these methods worked, the reason could be:

• 📱 Hardware malfunction: Damage to antenna, module Wi-Fi/Bluetooth It's a motherboard, it's a diagnostic.
• 🔒 Lockdown IMEI: If the phone doesn't catch the network after firmware, it may have crashed IMEI. Check it out with code *#06#.
• 🛡️ Software failure: In rare cases, flashing through Fastboot or EDL-regime.

For Xiaomi models with dual support SIM-cards (e.g. Redmi Note 11 Pro or POCO X4 Pro) make sure that the problem is not related to a particular slot. SIM-maps or use only one card.

FAQ: Frequent questions about resetting the network on Xiaomi