How to distribute Wi-Fi from Xiaomi phone: all methods and hidden settings MIUI

Distribution of the Internet with Xiaomi is one of the most popular functions when there is no router at hand, and a laptop or tablet urgently needs access to the network. MIUI offer several ways to organize an access point: classic Wi-Fi hotspot, distribution through USB But many users face problems ranging from not having an option on the menu to automatically shutting down after 5 minutes.

In this article, we will discuss all the current methods of Internet distribution on Xiaomi, Redmi and POCO, including hidden settings MIUI 14/15, circumventing operator restrictions and solving typical errors. We will focus on the nuances for models with Dual SIM, as well as how to save battery power during long-term handouts. If your phone does not see the option “Access Point” or constantly resets the connection, here you will find a solution.

1. Preparing the phone before handing out Wi-Fi

Before you turn on the hotspot, check three key parameters: mobile Internet status, settings. SIM-maps and versions MIUI. On old firmware (MIUI 12 and below) may not support Wi-Fi 6 or 5 GHz, which will limit the speed of the distribution.

On Xiaomi models 12/13/14 Redmi Note 11/12 Dual 5G It is important to choose the right one SIM-For example, if you have two cards installed — one with unlimited rates and the other with traffic restrictions — the default system may use the wrong one" SIM. To avoid unexpected write-offs, follow:

• 📱 Check the balance and the rate: go to your operator's application (MTS, Beeline, MegaFon) and make sure that the distribution of the Internet is not blocked by the tariff, Tele2) Requires the option "Modem mode" to be connected".
• 🔄 Update. MIUI: Go to Settings. → The phone. → Update the system. MIUI 13 may not have Wi-Fi 6 support for hotspot.
• 🔋 Charge your phone: Wi-Fi distribution at a charge level below 20% automatically turns off on most Xiaomi models (default setting).

⚠️ Note: On phones with MediaTek Helio G (e.g. Redmi) 9A/10A) When you give Wi-Fi, you can heat up the processor a lot. 45°C, use it. USB-Distribute or reduce the number of connected devices.

2. Method 1: Distributing Wi-Fi via hotspot (most popular)

This is a standard method that works on all Xiaomi models, from Redmi 4X to Xiaomi 14 Ultra. The speed of the transfer depends on the version of the Wi-Fi module in the phone:

• Wi-Fi 4 (802.11n) – up to 150 Mbps (old models like Redmi 5).
• Wi-Fi 5 (802.11ac) – up to 867 Mbps (Xiaomi 11T, POCO F3).
• Wi-Fi 6 (802.11ax) - up to 1.2 Gbps (Xiaomi 13 Pro, Redmi K60).

To turn on the hotspot:

1. Open Settings → Access Point and modem (on MIUI 14/15, the path may differ: Settings → Connections → Access Point).
2. Slip on the Portable Wi-Fi hotspot.
3. Set up: 🔐 Name of the network (SSID): by default, the phone model (for example, Redmi_Note_12_5G). 🔑 Password: minimum 8 Symbols (we recommend using a combination of letters and numbers). 📶 Range: If your laptop supports 5 GHz, select it for less interference.

Portable access point

If the option is not pressed in gray, check:

• 📵 Is the mobile internet connected (Icon) 4G/5G status-line).
• 🚫 Is there a lock operator (go to the operator's website and check the tariff).
• 🔄 Restart your phone – sometimes helps with crashes MIUI.

Method 2: Distribution of the Internet via USB (for PCs and laptops)

This is useful if you want to connect a stationary PC without Wi-Fi or save battery power on your phone. USB is usually faster than Wi-Fi, because there is no loss on wireless transmission.

• ⚡ Original cable required (cheap cables may not transmit data).
• 🖥️ Mi Phone Manager drivers must be installed on the PC (you can download it on the official Xiaomi website).
• 🔌 Not all. USB-Ports support data transfer (try different ports on PCs).

Instructions for setting:

1. Connect your phone to your PC through USB-cable.
2. In the phone, select Data Transfer mode (pop-up window when connected).
3. Go to Settings → Access Point and Modem → USB modem.
4. Activate the slider. A new network connection will appear on the PC.

If the internet doesn't come up:

• 🔄 Reinstall the Mi Phone Manager drivers.
• 📱 Turn on Debugging. USB (Settings → The phone. → Version. MIUI — Tap 7 times, then return to the Additional Settings → For developers).
• 🖥️ On PC, check that a new device has appeared in Network Connections (e.g., Remote). NDIS).

⚠️ Note: On some models POCO (for example, POCO X3 Pro) with USB-The distribution may turn off the charger. To avoid this, use a Y-cable with separate power.

Method 3: Distribution via Bluetooth (Saving Mode)

This method is suitable for connecting one device (for example, a tablet or another phone) with minimal charge consumption. The speed is limited to 1-3 Mbps, but this is enough for messengers or mail.

• 🔋 Minimum battery consumption (compared to Wi-Fi).
• 🔒 More secure connection (password is required only at first pairing).
• 📱 It works even if the phone’s Wi-Fi module is broken.

How to set up:

1. Turn on Bluetooth on both devices.
2. Then, put them together (input the same one). PIN-code, if required).
3. On Xiaomi phone, go to Settings → Access Point and Modem → Bluetooth modem.
4. Select a conjugated device from the list.

Limitations:

• 🚫 Does not support simultaneous connection of multiple devices.
• 🐢 Low speed (not suitable for video in the video) 1080p or online gaming).
• 🔄 When the connection is broken, you will have to re-enable the modem manually.

5. Solving Wi-Fi Distribution Problems on Xiaomi

Even after setting it up correctly, users often encounter errors, and here are the most common ways to fix them:

If none of these methods worked, try resetting your network settings:

1. Go to Settings. → SIM-maps and mobile networks → Resetting network settings.
2. Confirm the action (the list of Wi-Fi and mobile Internet settings will be deleted).
3. Reboot your phone and reset the access point.

💡

If the handout is unstable, try turning off Wi-Fi Assist in the settings SIM-This feature automatically switches between Wi-Fi and mobile internet, which may interrupt the connection.

6. Hidden MIUI settings for power users

MIUI has hidden settings that allow you to fine-tune the access point, such as increasing the inactivity time before shutdown or changing the Wi-Fi channel to reduce interference.

To access hidden settings:

1. Turn on Developer Mode: Go to Settings → About Phone → MIUI Version. Tap 7 times until the notification “You’ve become a developer!” appears.

Settings → Additional settings → For developers

Network

• 🔄 Always turn on mobile internet (prevents disconnection when handed out).
• 📡 Allow modem settings to be changed (for manual Wi-Fi channel settings).

⚠️ Warning: Changing hidden settings can cause mobile internet to run unsteady or processor overheating.Before experimenting, back up your Settings → System system → Backup.

💡

On models with a Snapdragon 8 Gen 2 processor (Xiaomi 13/14), the Wi-Fi 6 speed can reach 1.2 Gbps, but you need to manually select the 160 MHz channel in hidden settings.

7 How to Save Battery Charges When Distributing Wi-Fi

Internet is one of the most energy-intensive functions of a smartphone. On models with a battery of 4000-5000 mAh (for example, the Redmi Note 12 Pro+), the phone can run out in 2-3 hours of continuous operation.

• 🔋 Connect charging: even if the phone is 100% charged, the Wi-Fi handout quickly eats up the charge. 18W.
• 🌙 Turn on the dark topic: AMOLED-screens (e.g. Xiaomi) 12T) This reduces energy consumption by 10-15%.
• 📵 Turn off unnecessary background processes: Go to Settings → Annexes → Permits → Autostart and disable autostart for unnecessary applications. c Settings → Battery → Battery Optimization Select "Balanced" Mode".
• 🔊 Reduce screen brightness to 30-40% and turn off Adaptive Brightness.

If you need to give away the internet for a long time (for example, on a trip), consider alternatives:

• 🔌 Powerbank with Quick Charge support (e.g. Xiaomi Mi Power Bank 3) 20000mAh).
• 📶 4G/5G-router (e.g. Xiaomi Mi Router) 4G) — It consumes less energy than a smartphone.

8. Alternative ways of distributing the Internet

If standard methods don’t work or you need to connect a device without Wi-Fi/Bluetooth (like a Smart TV or a set-top box), try these options:

• 🖥️ Reverse Tethering: Allows you to distribute the Internet from PC to phone through USB. To do this: Install ClockworkMod Tether on your PC. Connect your phone and turn on Debugging. USB. Run the program and select USB Tether.

VPN-distribution

If the operator blocks the distribution, you can use a VPN (for example, 1.1.1.1 or ProtonVPN). After connecting to the VPN, turn on the hotspot - sometimes this bypasses the restrictions.

Bridge mode (for advanced)

If you have access to the router, you can configure WDS-A bridge so that the phone can distribute the Internet from the router, not from the mobile network, which will reduce the load on the battery.

For owners of Xiaomi root-rights available additional features:

• 🛠️ Change of change TTL to bypass the distribution lock by some operators (requires Magisk and module) TTL Editor).
• 🔧 Set up iptables to redirect traffic (allows you to distribute the Internet even if the operator blocks the standard modem).

Note: the speed will be lower than with direct distribution of mobile Internet, due to dual routing.