How to distribute WiFi from the phone Xiaomi Redmi: full instructions with error solutions

Xiaomi Redmi smartphones (including Note series, POCO Redmi K allows you to distribute mobile Internet through a Wi-Fi hotspot, a feature that helps when you don't have a router at hand, but many users face problems: the point does not turn on, the devices do not connect or the speed leaves much to be desired. In this article, we will discuss all ways to configure the distribution of Wifi on Redmi, including hidden options. MIUI, And solve typical errors.

It is important to understand that the algorithm for enabling the access point may differ depending on the version. MIUI (12/13/14) And the phone models. 12 Pro+ The menu looks different than on the POCO X3 NFC. We'll look at universal methods, and also nuances for specific devices. 13/14 with the shell HyperOS (new software from Xiaomi), the instruction is also suitable - the differences are minimal.

Before you start, check two key points: mobile internet availability (3G/4G/5G) If you have a traffic-restricted tariff, keep in mind that connected devices will consume it just like the phone itself.

1. Standard method: Enabling the access point in the settings MIUI

This is the simplest method that works on all Xiaomi Redmi smartphones regardless of the model. The interface may vary slightly, but the logic remains the same.

Open the Settings app (the gear icon on the home screen) and follow the following steps:

1. Go to the Network and the Internet (or Connections and Sharing in the Internet) MIUI 14).
2. Select Access Point and modem (in some versions – Modem Modem).
3. Slip on the Wi-Fi hotspot.
4. Activate the slider in the upper right corner. If you get a confirmation request, press OK.

Once turned on, the active access point notification will appear on the screen, and the status bar will show the corresponding icon. Now other devices (laptops, tablets, TVs) can connect to your Redmi as a router.

Check the balance of mobile Internet

Make sure that SIM-The card supports data transmission

Battery charge of at least 30%

Turn it off. VPN (may block the distribution)-->

2. Network name setting (SSID) and password

By default, the access point on Xiaomi Redmi has a standard name (for example, Redmi Note). 11_AP) And the password, to change them:

1. In the Wi-Fi Access Point menu (see the previous section), click on Access Point Settings.
2. In the field Name of the net (SSID) Enter the desired name (e.g., my name_Redmi_Hotspot). Use Latin and numbers – Cyrillic can cause problems on some devices.
3. In the Password field, specify a reliable key (minimum) 8 We recommend a combination of letters, numbers and characters (for example, Xiaomi).@2026!).
4. In the Security section, select WPA2-PSK (Optimal balance of safety and compatibility).
5. Press Save.

Important: If you use a smartphone with dual-band Wi-Fi (e.g. Redmi) K50 Pro, in the settings of the access point, the option of selecting the frequency - 2.4 GHz or 5 GHz may appear. Choose 2.4 GHz for maximum compatibility with older devices.

If devices can’t connect after changing their settings, try resetting the access point to the standard settings. To do this, click on the three points in the upper right corner of the Settings menu and select Reset Settings.

3. Alternative ways to enable the access point

If the standard method does not work (for example, due to a failure) MIUI), Try these options:

Method 1: Through the notification panel

Swipe your finger down from the top edge of the screen to open the notification bar. Find the Access Point icon (usually next to Wi-Fi and Bluetooth) and hold it for 2 seconds. This will open the settings menu where you can activate the handout.

Method 2: Google Voice Assistant

Say, "OK, Google, turn on the hotspot." The assistant will execute the command if they have access to the network settings, which works for all Redmis with Google Assistant installed.

Method 3: Codes USSD (for certain operators)

Some mobile operators (such as MTS or Beeline) block the Internet by default. USSD-request:

• 📱 MTS: Dial *111*77# and select the option "Distribute the Internet".
• 📱 Beeline: *110*181# → "Services" → "Wi-Fi distribution".
• 📱 Megaphone: *105*07# → switch on "Modem mode".

After activating the service, restart the phone and try to turn on the access point again.

4. Solving problems with connecting devices

If other gadgets can’t connect to your Redmi hotspot, check the following:

Problem 1: The device cannot see the network

• ⚡ Check if the access point is turned on (the icon in the status bar should be on).
• ⚡ Make sure that the connected device is Wi-Fi enabled.
• ⚡ Try changing the name of the network (SSID) to a simpler (e.g, Xiaomi_Hotspot).
• ⚡ If you use 5 GHz, switch to 2.4 GHz (in the access point settings).

Problem 2: Connection is available, but there is no internet

• 🌐 Check the balance of mobile Internet (possibly out of traffic).
• 🌐 Make sure that your phone has Mobile Data enabled (in settings) SIM-map).
• 🌐 Turn it off. VPN Proxy servers (they can block the transfer of data).
• 🌐 Reboot your phone and turn on the access point again.

Problem 3: Constantly asking for a password

This happens when the password is entered incorrectly or the network is running in a mode. WPA3, It's not supported by older devices:

1. Change the type of security to WPA2-PSK.
2. Set a password without special characters (for example, Xiaomi1234).
3. On the connected device, “forget” the network and connect again.

💡

If you connect a laptop to Windows 10/11 and it does not see the access point, update the Wi-adapter drivers through Device Manager".

5. How to save battery power when distributing Wifa

Wi-Fi distribution is one of the most energy-consuming features of a smartphone, and to extend the life of Redmi:

• 🔋 Connect your phone to charge (preferably via the original adapter).
• 🔋 Reduce screen brightness to 50% or turn on Adaptive Brightness.
• 🔋 Turn off application background synchronization in Settings → Battery. → Optimization.
• 🔋 Activate Energy Saving Mode (but note that this can slow down your internet speed).
• 🔋 If you donate the Internet rarely, turn off the access point after use.

Hidden life hack for Redmi with MIUI 14+: In the AP settings, you have the option to turn off when you're inactive. Turn it on and set a timer (e.g., 10 minutes) and the phone will automatically turn off the distribution if no one is connected to the network.

⚠️ Warning: If the Redmi body temperature exceeds 45°C when you distribute WiFi, immediately turn off the hotspot and let the phone cool.Overheating can lead to trottling (automatic performance decrease) or even shutting down the device.

6. Set up the distribution of Wifay through USB Bluetooth

In addition to Wi-Fi, Xiaomi Redmi supports the distribution of Internet through the Internet USB-USB-ethernet and Bluetooth, which are less convenient but can be useful in specific situations.

Distribution via USB (USB-ethernet)

1. Connect your phone to your computer through USB-cable (preferably original).
2. In the phone settings go to the Network and the Internet → Access Point and modem.
3. Activate the option. USB-modem.
4. A new device will appear on your computer in Network Connections – use it to access the Internet.

🔹 Advantage: More stable connection and lower battery consumption.

🔹 Disadvantage: Works with only one device (computer).

Handling over Bluetooth

1. Turn on Bluetooth on your phone and connected device.
2. Connect devices (enter a confirmation code if required).
3. In the Access Point and modem settings, activate the Bluetooth modem.

🔹 Advantage: Low battery consumption.

🔹 Disadvantage: very low speed (up to 3 Mbps) and limited compatibility.

7. Frequent errors and their solutions

Even after setting up the access point on Redmi correctly, let’s look at the common errors and how to fix them.

⚠️ Note: Some Redmi models (e.g. Redmi) 9A or POCO M3) The access point may not work when connecting to the network 5G. In this case, manually switch to 4G customized SIM-maps: Settings → SIM-maps and mobile networks → Preferred type of network → 4G.

8. Hidden Access Point Features on Xiaomi Redmi

MIUI Hiding a few useful options that can improve the operation of the access point:

• 🔍 Connected Device Limitation: In the access point settings, you can set a limit (e.g., a maximum of 5 devices) to avoid overloading.
• 🔍 Blacklist: Some versions MIUI This allows you to block specific MAC-Device addresses (useful if outsiders connect to your network).
• 🔍 Auto-disconnect: Disable in case of inactivity (available in the MIUI 14+) Saves charge by turning off the access point if no one is connected to it.
• 🔍 Maximum performance mode: on flagships (e.g. Redmi) K60 Pro) in the developer settings, you can enable Force Wi-Fi Hotspot in High Perf Mode to increase speed.

To open the developer settings (if not already activated), go to Settings → About the phone and 7 times tap on the item Version MIUI. Then go back to the basic settings and find a new section for developers.

💡

If the access point on Xiaomi Redmi is unstable, try updating the firmware to the latest version. MIUI. New versions fix Internet distribution errors, especially on models with MediaTek chipsets (Helio) G95, Dimensity 700 and others.).

FAQ: Answers to Frequent Questions