How to distribute the Internet from your phone to your Xiaomi TV: the full guide 2026

Connecting Xiaomi TV to the Internet via smartphone is a convenient solution when you do not have a router or cable connection at hand, this feature will come in handy for streaming videos, online games, firmware updates or even working with a smart home through Mi Home. However, not all users know that modern TVs are Mi. TV Redmi Smart TV Support several ways to distribute the Internet – from classic Wi-Fi hotspot to hidden functions through the Internet USB-debugging.

In this article, we will analyze all current methods of connection (including little-known ones), compare them in speed and stability, and solve typical problems - from the "failed to connect to the network" error to the limitations of the mobile operator. TV A2 2026, Mi TV Q2 Redmi Smart Fire TV, Where the connection algorithm may differ from the older versions.

1. Method. №1: Distributing the Internet via Wi-Fi hotspot (the easiest way to do it)

This is a basic method that works on all Xiaomi Wi-Fi-enabled TVs (even on budget models like the Redmi Smart TV X43), the main advantage is that no additional cables or adapters are required. However, there are nuances: speeds are limited by the Wi-Fi 4/5 standard of your smartphone, and some carriers (such as Tele2 or Yota) block the distribution at no extra cost.

To activate hotspot on Android:

• 📱 Open the Settings. → Connections → Access Point and modem
• 🔄 Turn on the "Mobile Access Point" switch"
• ⚙️ Click on "Setting up the access point" and set: Network name (SSID): for example, Xiaomi_Hotspot Password: minimum 8 symbols (use) WPA2-PSK) Range: 2.4 GHz (for stability) or 5 GHz (for speed)
• 🔗 Connect the TV: Settings → Wi-Fi → Select your network

On the iPhone, it's a different path.

• 📱 Go to Settings. → Modem modem
• 🔄 Activate "Allow others"
• ⚠️ Note: iOS is used by default WPA3, Which may not be supported by older Xiaomi models TV (Like Mi. TV 4S In 2018, change the security type to WPA2 hotspot.

2. Method. №2: Connection through USB (maximum speed)

If your TV is supported USB-Debugging (available on Android models) TV 9.0+, for example, Xiaomi TV A Pro or Mi TV Q1E), this method will 30–40% faster than Wi-Fi and less power consumption on your smartphone. USB-C/USB-A (Cheap analogues may not transmit data).

Instructions for Android:

Enable the Developer Mode on the TV (Settings) → On TV. → 7 times press "Version" MIUI TV")|

Activate. USB-debugging (Settings) → Additionally. → For developers → USB-debugging)|

Connect the cable to the port USB 3.0 on TV (usually blue)|

Install ADB drivers on your smartphone (required for some models)

-->

⚠️ Note: On Xiaomi TVs with firmware below MIUI TV 3.0 (e.g. Mi) TV 4A 2019) USB-The distribution may not work due to the lack of drivers RNDIS. Check the version of the software in Settings → On TV.

After the cable is connected:

1. On your smartphone, select the mode "USB-modem" (will appear in the notification curtain after connecting).
2. On the TV, go to Settings → Network → Wired network.
3. Wait for the automatic IP (if the network does not appear, restart both devices).

3. Method. №3: Bluetooth (saving battery power)

This method is suitable for short-term connection (for example, for updating applications or transferring files), since the speed is limited to 1-3 Mbps, but the battery consumption of the smartphone is minimal - ideal for trips. It works on all Xiaomi TVs with Bluetooth 4.2+ (for example, Mi TV P1, Redmi Smart TV X55).

Connection algorithm:

• 📱 On a smartphone: Settings → Connected devices → Connection parameters → Modem mode → Bluetooth modem.
• 📺 On TV: Settings → Bluetooth → Searching for devices → Choose your phone.
• 🔗 Confirm pairing on both devices (password is usually 0000 or 1234).
• 🌐 After connecting, go to Settings. → Network → Bluetooth Network and activate Internet usage.

⚠️ Note: Some operators (e.g. MTS or Beeline) block the distribution of Internet via Bluetooth. If after connecting the network does not, check the tariff or use the Internet. VPN on a smartphone (e.g. 1.1.1.1).

4. Comparison of methods: which one to choose?

The choice of method depends on your tasks. Below is a table with a comparison of key parameters:

💡

To stream 4K video (Netflix, YouTube) use USB or 5GHz Wi-Fi. Bluetooth is only suitable for text data or music.

5. Problem Solving: Why isn't the TV connected?

Even with the right settings, errors can occur. Consider typical scenarios and how to fix them:

Error: "I failed to connect to the network"

Causes and solutions:

• 🔋 Incorrect password: Make sure the symbol register matches (password) Xiaomi123 ≠ xiaomi123).
• 📶 Weak signal: Bring the phone closer to the TV (optimally 1-2 meters). TV Q2 You can use an external antenna (connected to the connector). RF IN).
• 🔄 Conflict IP: On the TV, manually ask. IP-address from a different range, such as 192.168.43.100 (if the phone is dealing from 192.168.42.1).
• 📵 Operator lock: Check if the option "Disallow modem" in the personal account of the operator is active (for example, MegaFon it is disabled in the "Services" section").

Error: "Connected but no Internet"

Frequent problem with USB-- Check the connection:

• 🔌 Regime. USB: On the smartphone should be selected "USB-modem, not charge".
• 🛠️ Drivers: On Xiaomi TV with firmware below MIUI TV 4.0 may require manual driver installation RNDIS through ADB:
• 🌍 DNS: Try to manually prescribe. DNS on TV: 8.8.8.8 (Google) or 1.1.1.1 (Cloudflare).

💡

If the TV is connected, but the speed is below 1 Mbps, turn off the “Traffic Saving” function on the smartphone (Settings → Connections → Data Saving).

6. Optimization of speed and stability

To improve the quality of the connection, follow these recommendations:

For Wi-Fi hotspot:

• 📶 Select a free channel: Use the WiFi Analyzer (Android) or NetSpot (iOS) app to find the least loaded channel in the 2.4 GHz or 5 GHz band.
• 🔋 Limit background tasks: On your smartphone, turn off automatic app updates and synchronization (especially relevant for your smartphone). Xiaomi/Redmi s MIUI 14+).

For USB-connection:

• 📥 Turn off charging: Some cables transmit data and charge the phone at the same time, which can slow down.Try using the cable without Quick Charge support.

For Bluetooth:

• 🔄 Use Bluetooth. 5.0: On Xiaomi smartphones 12/13/14 and Mi TVs TV Q2 2023+ Bluetooth-supported LE, which consumes the battery more economically.

7. Alternative methods (for experienced users)

If the standard methods do not work, you can use advanced techniques:

Distribution via ADB Reverse (for developers)

This method allows you to “fly” the Internet from your phone to your TV through a debugging bridge, suitable for models with Android TV 10+ (for example, Xiaomi TV A2 2026).

Instructions:

1. Activate. USB-TV debugging (see section 2).
2. Connect your phone and TV to a single router (or create a hotspot on your phone and connect your TV to it).
3. On the computer, run the commands: adb connect [IP_television]:5555 adb reverse tcp:8080 tcp:8080 (where 8080 — traffic-proxy).
4. On your TV, configure the proxy server in Settings → Network → Additional → Proxy, specifying the phone’s IP and port 8080.

Use of external USB-modem

If your Xiaomi TV supports you OTG (Like Mi. TV Q1E), plugged in 4G USB-modem (e.g. Huawei) E3372) port-to-port USB. It'll give:

• 📶 Stable connection without discharge of the phone.
• 🔋 Possibility to use SIM-free-rate.
• 🔄 Speed up to 150 Mbps (depending on modem and network coverage).

⚠️ Attention: Not all USB-Modems compatible with Android TV. Before buying, check the list of supported devices on the Xiaomi website or forums (for example, check the list of supported devices, 4PDA). Modems on a Qualcomm chip MDM9207 (for example, ZTE MF833V) work best.

8. Frequent Questions (FAQ)