How to distribute Wi-Fi with Xiaomi Redmi Note 8: all ways and life hacks

Xiaomi Redmi Note 8 is still a popular choice among users, despite the release of newer models. One of the most popular features is the ability to distribute mobile Internet to other devices, turning the phone into a full-fledged router. This saves you when traveling, in the country or when the main Wi-Fi suddenly turned off, but not everyone knows how to properly configure the access point on this model, especially if you have not previously faced with similar tasks.

In this article, we will break down all the available ways to distribute Wi-Fi with the Redmi Note 8: from the standard “Access Point” function to hidden features. MIUI. You'll learn how to increase the speed of the distribution, save battery life, and solve typical problems like "devices are not connected" or "the Internet is intermittent." 4G Wi-Fi so you can choose the best option.

Important: Instructions are relevant to MIUI 12-14 (including global and Chinese firmware) If you have custom firmware installed (like LineageOS or Pixel Experience), some menu items may differ.

1. Standard method: access point in MIUI settings

The easiest and most reliable method is to use the built-in Access Point (or Modem Modem) feature, which is available on all Xiaomi smartphones and does not require root rights or additional applications.

1. Open Settings and go to Network and Internet (or Connections and Sharing in some versions) MIUI).
2. Select Access Point and modem (may be called Modem Modem or Shared Internet).
3. Activate the Wi-Fi Access Point switch.
4. Click on Access Point Settings to set the network name (SSID), Password and other parameters.

The default network will be called Redmi Note. 8_XXXX (where XXXX — last-minute IMEI), The password is generated automatically, and we recommend changing it to a more memorable one, but not too simple (for example, for example, the password is not too simple, Xiaomi1234! instead 12345678).

Mobile Internet is enabled (Icon) 4G/LTE status-line)

On account of enough traffic (distribution eats) ~10-15% more data than normal use)

The devices that will connect are within a radius of 5-7 meters.

Battery charged at least 30% (dispensing strongly puts the battery)

-->

Limitations of the standard method:

• 🔋 High battery consumption – the phone discharges 15-20% faster than normal use.
• 📶 Restriction on devices – you can connect up to 8 gadgets at a time (in practice 3-4 stable work).
• 🚫 Blocking by the operator – some mobile operators (for example, Tele2 or Iota) limit the distribution of the Internet without an additional option.

2. Alternative ways of distributing the Internet

If the standard hotspot doesn’t work or you need advanced settings, try one of these methods, which will work for power users or in non-standard situations (for example, if the phone does not catch the network, but you have access to Wi-Fi).

Distribution via Bluetooth

Less energy-consuming method, but with a speed limit (maximum) ~3 Mbps: Suitable for transferring data to a laptop or tablet, unless high speeds are needed.

1. Turn on Bluetooth on both devices.
2. In the Redmi Note 8 settings, go to Access Point and modem → Bluetooth modem.
3. Connect the device via Bluetooth and activate the distribution.

2.2. USB-modem (for PC)

The most stable and fast way, but requires a USB-Type C cable. Speed can reach 10-15 Mbps (depending on the operator).

1. Connect your phone to your computer via USB.
2. In the phone settings, select Access Point and modem → USB-modem.
3. A new connection will appear on the PC in Network Connections.

Distribution applications (if the standard function is not working)

If the access point turns off on its own or devices don’t connect, try third-party utilities:

• 📱 PdaNet+ — Bypassing the locking operators, supports USB/Bluetooth/Wi-Fi.
• 🌐 ClockworkMod Tether – does not require root, but may not work on newer versions of Android.
• 🔗 FoxFi is a simple interface, but limited functionality in the free version.

⚠️ Note: Distribution apps may conflict with built-in settings MIUI. Before installation, disable the standard access point and restart the phone.

3. Optimization of connection speed and stability

A common problem with Redmi Note 8 Wi-Fi is slow speed or connection breaks, due to the limitations of the Snapdragon 665 chipset and features. MIUI. Here's how to improve signal quality:

3.1. Access point settings

Open the Access Point Settings and change the following settings:

• 📡 Frequency Range: Choose 2.4GHz for better compatibility (5GHz faster but worse passes through walls).
• 🔒 Type of security: Install WPA2-PSK (fastest).
• 🔄 Wi-Fi Channel: If the network is slowing down, try channels 1, 6, or 11 (they are least intersected with other networks).

Programming tricks

A few tricks to speed up:

• 🛠️ Turn off energy saving: in the battery settings add the Access Point to the exceptions.
• 📴 Turn on the plane mode for 10 seconds: this resets the network settings and sometimes solves the problem with the cliffs.
• 🔄 Change. DNS: In the mobile network settings, specify 8.8.8.8 (Google) or 1.1.1.1 (Cloudflare).

💡

If the speed drops dramatically when connecting multiple devices, limit their number to 3-4" ~20% of the capacity.

Hardware restrictions

Redmi Note 8 supports a maximum of 10 connected devices at a time, but in practice only 4-5 are stable.

• 📶 At low signal 4G (1-2 divisions) the distribution rate will not be higher than 2-3 Mbit / s.
• 🔋 If the phone is hotter than 45°C, MIUI Automatically reduces the power of the Wi-Fi module.

4. Solving common problems

Even with the right setup, Redmi Note 8 users are faced with typical errors, and let’s look at the most common and ways to fix them.

4.1 Devices do not connect to the access point

Causes and solutions:

• 🔐 Incorrect password: Check the letter register (password is sensitive to it).
• 📱 Limitation MIUI: in some firmware you need to manually allow the connection of new devices in the settings of the access point.
• 🔄 Conflict IP: Reboot your phone and device that is not connected.

4.2. the Internet works, but pages do not open

It's got to do with the settings. DNS Or locking the operator:

1. Change. DNS 8.8.8.8 in mobile network settings.
2. Shut down. VPN or proxy on the connected device.
3. Check your account balance – some operators block access with zero balance, even if there is traffic.

The access point is itself disconnected.

MIUI It can turn off the distribution to save power:

• ⚡ In the battery settings, disable optimization for the application Access Point.
• 🔋 Enable High Performance Mode in Power Settings.
• 🛠️ If the problem persists, install the Keep Alive app to force the process to hold.

⚠️ Note: If after the update MIUI Access point stopped working, reset network settings (Settings) → The phone. → Resetting settings → Resetting Wi-Fi, mobile network and Bluetooth settings, which will delete all the saved networks, but return functionality.

5. Savings in traffic and battery when handing out

Internet distribution is a resource-intensive process, so to avoid being left out of touch or with a dead phone at the most inopportune time, follow these tips.

5.1 How to reduce traffic consumption

Mobile Internet is used faster when handing out than when you use it directly. Here's how to save money:

• 📊 Disable auto updates: on connected devices, prohibit background downloading of applications and updates.
• 🎵 Limit streaming: on YouTube or Netflix, choose quality 480p Full instead HD.
• 📱 Use data compression: in Chrome or Opera, enable Traffic Saving mode.

5.2 How to extend battery life

Wi-Fi increases the load on the processor and the communication module, so that the phone holds the charge longer.

• 🔋 Connect charging: if you give away the Internet for a long time, use a power bank or network adapter.
• 🌑 Reduce screen brightness: even if the phone is lying idle, the display in the “always on” mode puts the battery down.
• 🛡️ Turn off background processes: in the developer settings (Settings) → The phone. → Version. MIUI — tap 7 times) limit background applications.

💡

When distributed through 4G The phone consumes 30-40% more traffic than normal surfing, which is due to service packets and data retransmission.

6.Security: How to Protect Your Access Point

Open Wi-Fi is easy prey for hackers, who can not only hook up on your Internet, but also intercept data (passwords, messages).

Strong password

Use a combination of:

• 🔤 10-12 characters (letters) + figure + special symbols).
• 🔢 Avoid obvious sequences (qwerty, 12345678).
• 🔄 Change your password every 2-3 months.

6.2. Hiding the network (SSID)

In the settings of the access point, you can turn off the broadcast of the network name (Hide). SSID). Only those who know the exact name can connect, but this is not a panacea: experienced users can find a hidden network using special utilities.

Restriction on MAC-address

In some firmware MIUI There is a filter function for MAC. You can only allow connection to certain devices:

1. Find it. MAC-Trusted Device Addresses (usually specified in Wi-Fi settings on them).
2. In the access point settings, add them to the list of allowed ones.

⚠️ Warning: If you are giving out internet in a public place (cafe, train station), never use an open network without a password. Attackers can connect and access your data through vulnerabilities in the Wi-Fi protocol.

7. Comparison with other Xiaomi smartphones

How does the Redmi Note 8 handle Wi-Fi distribution compared to other Xiaomi models? MIUI 14:

The Redmi Note 8 loses to newer models in speed and stability, but benefits in autonomy thanks to the battery of 4000 mAh. If you need a reliable hand for a long time (for example, on a trip), it is better to choose the Redmi Note 10 Pro or Poco. X3.

FAQ: Frequent questions