How to distribute mobile Internet from the phone Xiaomi Redmi 8: all ways and life hacks

Separating the Internet from Xiaomi Redmi 8 to another phone is a challenge that millions of users face, and this budget smartphone of 2019 still remains popular due to the reliability and functionality of MIUI. However, not everyone knows how to properly configure the access point to avoid connection problems or slow speeds.

In this article, we will analyze all ways of distributing the Internet - from the classic Wi-Fi hotspot to the Internet. USB-modem and Bluetooth connections, and we'll focus on the hidden settings. MIUI 14/15, And that's what's going on, which is affecting the stability of the connection, and also the common bugs that might cause the Internet to fail on the receiving device. If you've ever seen a phone see the network, but the pages don't load, here's the solution.

1. Preparation of the telephone before distribution of the Internet

Before you turn on the access point, you need to follow a few critical steps, and if you miss them, you risk getting an unstable connection or not being able to connect at all.

First, check the mobile Internet balance and the tariff plan. Many operators (for example, MTS or Beeline) block the distribution of the Internet at cheap rates or charge an additional fee. Check the terms with your provider - sometimes it is enough to send the Internet to the Internet. USSD-*111# or enter your personal account.

• 📶 Make sure mobile internet works – try to open any website in your browser.
• 🔋 Battery charge must be at least 30%.Redmi 8 automatically disables access point at low charge.
• 📱 Update. MIUI There are bugs in old firmware that distribute the Internet (especially relevant for the Internet). MIUI 12 and below).

Also worth considering is that Redmi 8 only supports Internet transmission over 4G (LTE) networks, if your phone is connected to 3G or 2G, the speed will be extremely low, and some devices may not connect at all, to check the type of network:

1. Open the Settings. → SIM-maps and mobile networks.
2. Choose yours. SIM-map.
3. See Network Type – LTE should be listed.

2. Internet distribution via Wi-Fi (access point)

It's the most popular and versatile method, and it allows you to connect multiple devices to the Internet at once -- phones, laptops, tablets -- and on Redmi 8, it takes less than a minute to set up the hotspot, but there are nuances that few people know about.

To turn on the hotspot:

1. Go to Settings. → Access Point and modem.
2. Select the Wi-Fi Access Point.
3. Activate the slider at the top of the screen.
4. Change the Network Name (SSID) and Password if necessary.

By default, the network will be called Redmi. 8_XXXX (where XXXX — last-minute IMEI), A password is a random set of 8 We recommend changing the password to a more memorable one, but not too simple (e.g., a password that is not too simple, MiHome1234!). This will protect you from unauthorized connection.

Make sure that the mobile Internet is turned on on on the handing out phone |

Check that the receiving device is disabled mode "In the plane" |

Restart both phones if the connection does not occur |

Try connecting from another device for diagnosis-->

⚠️ Note: If after turning on the access point, the Internet stopped working on the Redmi 8 itself, check the settings to Turn off mobile Internet when connecting to the access point in Settings → Access Point and modem → This parameter has to be turned off.

3. Internet distribution via USB (modem mode)

USB-A modem is the best choice if you want to connect a laptop or PC, and when you want maximum stability of connection, USB-The connection does not suffer from interference and provides a higher speed.

To set up:

1. Connect Redmi 8 to another device via the original device USB-cable (low-quality cables may not transmit data).
2. There will be a notification on the phone. USB-Connection – select Data Transfer (or MTP).
3. Go to Settings. → Access Point and modem.
4. Activate. USB-modem.

On a Windows computer, drivers are installed automatically. If the Internet is not working:

• 🔄 Reconnect the cable.
• 🖥️ Check Network Connections in Windows – a new connection should appear.
• 🔧 Update drivers for Xiaomi Redmi 8 via Device Manager.

💡

If USB-The modem is not working, try to turn on debugging USB In Settings → The phone. → Version. MIUI (Press 7 times on the version, then return to the Additional Settings → For developers).

USB speeds are usually faster than Wi-Fi, but depend on the quality of the cable and port. Use USB 3.0 (blue) port on your PC for maximum performance.

4. Internet distribution via Bluetooth

This method is less popular, but useful in situations where Wi-Fi is turned off or is not available. USB-Bluetooth connection consumes less power than Wi-Fi, but speed is limited ~3 Mbps (enough for messengers, but not for high-quality video).

Instructions:

1. Turn on Bluetooth on both phones.
2. On Redmi 8, go to Settings → Access Point and Modem → Bluetooth modem.
3. Connect the second device via Bluetooth (enter a confirmation code if required).
4. On the receiving phone in Bluetooth settings, select Connect to the Internet (the name of the item may differ).

The main disadvantage of this method is the high latency (ping up to 500 ms), and it is not recommended to use it for online games or video calls.

⚠️ Attention: On some firmware MIUI The Bluetooth modem function is hidden. To activate it, first connect the device via Bluetooth, then go back to the Access Point and modem menu, the item should appear.

Typical problems and their solutions

Even when set up correctly, Redmi 8 users often encounter errors, and we've collected the most common cases and ways to fix them.

"It's connected, but the Internet isn't working" is the most common problem.

• 🚫 Blocking the operator - check the fare (see section 1).
• 🔄 Conflict IP — Try changing the frequency band to the access point settings 2.4 GHz (only) b/g).
• 📵 APN Not configured - go to Settings → SIM-maps and mobile networks → Access points (APN) Check the parameters of your operator.

“The access point is constantly off” – the fault may be:

• 🔋 Saving Charge – Disable Adaptive Battery in Settings → Battery and productivity.
• 📡 A weak signal if the network level is lower 2-3 dividing, the phone can automatically turn off the hotspot.
• 🔄 Overheating - Redmi 8 at temperatures above 45°C's starting to limit function. Let the phone cool down.

If none of these methods helped, reset your network settings:

1. Settings → About the phone → Resetting settings.
2. Select Reset Wi-Fi, Mobile Network and Bluetooth settings.
3. Confirm the action.

6. Speed optimization and traffic saving

The speed of the Internet you're giving away depends on many factors: the quality of the operator's network, the number of connected devices, the background traffic, and we've put together proven ways to speed up the connection and reduce megabytes.

How to increase speed:

• 📶 Select the network. 4G — In Settings → SIM-maps and mobile networks → Preferred network type only set up LTE.
• 🔄 Change. DNS — In the access point settings (in addition) specify 8.8.8.8 and 8.8.4.4 (Google) DNS).
• 📵 Turn off the background apps, they can eat the channel. Use Settings. → Annexes → Auto-start.

How to save traffic:

• 📊 Enable the traffic counter - in Settings → SIM-maps and mobile networks → Traffic set a limit.
• 🔒 Block background traffic for unnecessary apps (e.g. automatic game updates).
• 📱 Use Savings mode – in the settings of the access point, activate Traffic Savings.

💡

On Redmi 8, the maximum Internet speed is limited to 150 Mbps (theoretically), but the real speed is rarely higher than 50-70 Mbps due to the hardware limitations of the Snapdragon 439 chipset.

If you're giving out the Internet to a laptop, turn off Windows automatic updates and cloud syncs (OneDrive, Google Drive), which can unobtrusively download gigabytes of data.

7. Alternative ways of distributing the Internet

If standard methods don't work or are not available, you can use workarounds, which require additional actions, but sometimes they are the only solution.

Method 1: Applications for distribution of the Internet

Google Play has utilities that make it easier to set up a hotspot, such as:

• PdaNet+ allows you to distribute the Internet even if the operator blocks the standard access point.
• ClockworkMod Tether – does not require root rights, works via USB.

Please note that some applications may request root access, which is not secure. We recommend using only proven high-ranking utilities.

Method 2: Modem modem via PC

If you have a computer with Internet connection (for example, via Ethernet), you can distribute it to Redmi 8 in reverse order:

1. Connect your phone to your PC via USB.
2. On PC, turn on Shared Internet access to connect Redmi 8.
3. On the phone in Settings → Access Point and modem activate USB-modem.

This method is useful if the mobile internet on Redmi 8 is not working well and you have access to a wired connection.

8. Security in the distribution of the Internet

An open hotspot is a potential threat to your data, and attackers can intercept traffic or connect to your network, and follow these rules to protect yourself:

• 🔐 Always use a complex password (at least 8 characters with numbers and letters).
• 📵 Turn off the access point when you don’t need it.
• 🛡️ Enable the firewall - in Settings → Annexes → Firewalls block suspicious programs.
• 🔄 Change your password regularly, especially if you’re connecting unfamiliar devices.

If you distribute the Internet in a public place (cafe, airport), avoid transferring confidential data (passwords, bank details). VPN.

⚠️ Note: Redmi 8 has Hide Network (in the Additional section) in its access point settings, which will make your hotspot invisible to other devices, but you will have to enter the network name (SSID) manually on each gadget.

FAQ: Frequent questions about the distribution of the Internet on Redmi 8