How to distribute the Internet from the phone Xiaomi Mi 9: all ways + problem solving

Why give away the Internet with Xiaomi Mi 9 and what you need

The Xiaomi Mi 9, launched in 2019, is still the hottest mobile internet device. With support for Cat.16 LTE (up to 1Gbps) and dual-band Wi-Fi (2.4GHz + 5GHz), it can be a full-fledged router for a laptop, tablet or other gadget. But how to set up an access point to avoid a communication clutter or a fast battery drain?

In this article, we will discuss all ways to distribute the Internet with Mi. 9 — From the classic Wi-Fi hotspot to USB-modem and Bluetooth connections, and we'll focus on the hidden settings. MIUI, which allow for increased data transmission speeds 20-30% You will also learn how to circumvent operator restrictions (e.g., MegaFon or Tele distribution locks).2) What to do if your devices are not connected to your network.

Before you start, check:

• 📶 Mobile network: the phone must be enabled mobile Internet (icon) 4G/5G status-line).
• 🔋 Battery Charging: When Actively Distributing Mi 9 spend up 15-20% Connect the charger if you plan to use it for a long time.
• 📱 Version. MIUI: The instructions are relevant for the firmware MIUI 12-14 The menu may differ on older versions.

Method 1: Distribution of the Internet via Wi-Fi (modem mode)

This is the most popular and versatile method. Your Xiaomi Mi 9 creates a wireless network that can connect up to 10 devices at a time (depending on the operator's settings), speed is limited only by tariff and network coverage.

To enable the access point:

1. Open the Settings. → Access Point and modem.
2. Slip on the Wi-Fi Access Point.
3. Activate the slider at the top of the screen.
4. When you first turn on, the system will suggest setting up a network name (SSID) and password. Use WPA2-PSK for maximum security.

By default. MIUI generates a random network name (for example, Xiaomi_1234) You can change them on the same menu:

• 🔒 Password: Must contain at least 8 characters. Avoid simple combinations like 12345678 - they are easy to crack.
• 📡 Range: By default, both 2.4 GHz (long range) and 5 GHz (high speed) are turned on. If the connected devices can't see the network, try turning off 5 GHz in the access point settings.
• ⏱️ Auto-disconnect: In the menu You can additionally configure the hotspot disconnection when inactivity (for example, after 5 minutes).

Make sure that the mobile internet is turned on|Check the network name (SSID) password|Turn it off. VPN, if he's active|Restart your phone if the access point is not turned on-->

⚠️ Note: Some operators (e.g. Yota or Tinkoff Mobile) block the distribution of Internet at unlimited rates. If after turning on the hotspot devices are connected, but the Internet does not work, check the terms of your tariff or use bypass methods (see the section "Problem Solving").

Method 2: Distribution through USB (USB-modem)

This method is suitable if you only need to connect one device to the Internet (usually a laptop or PC).

• 🔌 Savings: The phone charges while running, not discharged.
• 🚀 Stability: No interference like Wi-Fi, and no limit on the number of devices.
• 🔒 Security: the connection is on the wire, it is more difficult to intercept.

Instructions for setting:

1. Connect Xiaomi Mi 9 to your computer via the original USB-cable (important! Cheap cables may not support data transmission).
2. On the phone, select the connection mode File transfer (MTP) or USB-modem (will appear in the notification curtain after connecting).
3. The new network connection wizard will open on your PC, and if it doesn’t, check the drivers (download the official drivers for Xiaomi).
4. In Settings → Access Point and modem activate the option USB-modem.

If the internet doesn't work,

• 🔄 Reconnect the cable.
• 🖥️ On PC, check if a new network connection has appeared in the Control Panel → Network connections.
• 📱 On the phone in the settings USB Select Only Charging, Then Again USB-modem.

💡

If the speed is USB-modem lower than Wi-Fi, try to enable in the developer settings (Settings) → The phone. → Version. MIUI — slip 7 (x) option Disable restriction USB 2.0. It can increase the speed of the 30-50%.

Method 3: Distribution via Bluetooth

This method is less popular, but useful in two cases:

1. If you need to connect a device that doesn’t have Wi-Fi (like old printers or fitness bracelets).
2. If you want to save battery life, Bluetooth consumes less power than Wi-Fi.

How to set up:

1. Turn on Bluetooth on both devices.
2. On Xiaomi Mi 9, go to Settings → Access Point and Modem → Bluetooth modem.
3. Activate the slider and wait until the phone becomes detectable.
4. On the second device, find the Mi 9 in the list of available Bluetooth devices and connect.

Limitations of the method:

• 🐢 Low speed: maximum 3 Mbit/s (vs) 50-100 Mbit/s at Wi-Fi).
• 📱 One device: Only one gadget can be connected at the same time.
• 🔄 Instability: Connection can be interrupted when devices are more than 10 meters apart.

⚠️ Note: On some versions MIUI When you connect via Bluetooth, you may lose the sound in your headphones or speakers. To fix this, restart your phone or turn off/on your Bluetooth modem.

Comparison of Internet Distribution Methods: What to Choose?

Which method is better depends on your task, and in the table below we have compared all three methods according to the key parameters:

For most users, Wi-Fi is the best choice. It provides a balance between speed, convenience and the number of connected devices. USB-The modem is suitable for stationary use (for example, in the workplace), and Bluetooth is suitable for rare connections or devices without Wi-Fi.

Solving the Problem: Why Internet Distribution Doesn't Work

Even if you set it up properly, you can run into errors, and let's look at the most common problems and their solutions.

Problem 1: Devices are connected, but the internet is not working

Most often it has to do with the operator or phone settings.

• 📵 APN-Settings: Go to Settings → SIM-maps and mobile networks → Access points (APN) And make sure that you have the right settings for your operator, like for MTS, it's Internet.mts.ru, for Beeline, it's Internet.beeline.ru.
• 🔄 Flight mode: sometimes helps to turn it on and off.
• 📡 Network type: in settings SIM-pick out the cards 4G (recommended instead 3G/2G.

Problem 2: The access point is switched on and off immediately

This is a typical MIUI energy saving error.

• 🔋 Disable Battery Optimization for the Settings app (Settings) → Annexes → Application management → Settings → Battery → No restrictions).
• 📵 Reboot the phone.
• 🔄 Reset network settings: Settings → System system → Resetting settings → Resetting network settings.

Problem 3: The operator is blocking the distribution of the Internet

Some tariffs (especially unlimited ones) limit the possibility of distribution.

• 🔄 Shift. APN: create a new one APN Internet name and Internet address (without domain) sometimes bypasses blocking.
• 📡 VPN: Install an application like 1.1.1.1 or ProtonVPN and enable it before handing out.
• 📱 Root access: if you are willing to take risks, you can edit the file /system/build.prop, Adding the line net.tethering.noprovisioning=Warning: This will void the warranty!

Problem 4: Low speed of distribution

If the speed is lower than expected, try:

• 📶 Switch from 2.4 GHz to 5 GHz (or vice versa) in the access point settings.
• 📵 Turn off traffic savings in Settings → SIM-maps and mobile networks.
• 🔄 Enable Developer Mode and disable Absolute Traffic Volume (Settings) → Additionally. → For developers).

💡

If none of these methods worked, try resetting the network to factory settings, which will delete all stored Wi-Fi networks and passwords, but often solves distribution problems.

How to save battery power when giving the Internet

Xiaomi Mi 9 is equipped with a battery of 3300 mAh, but when you actively distribute Wi-Fi, it sits down in 4-5 hours.

• 🔋 Connect charging: even if the phone is discharged slower than the battery is running out, it compensates for the expense.
• 📵 Disable unnecessary modules: deactivate in the notification curtain GPS, NFC and synchronization.
• 🌑 Turn on the dark topic: AMOLED-screen 9 This reduces energy consumption by 10-15%.
• ⚡ Limit background activity: in Settings → Battery → Battery Optimization Select Strict for all applications except system.

You can also reduce the brightness of the screen to 30% and turn on the Battery Saving mode (but this will limit the performance of the phone).

If you’re a frequent Internet user, consider buying a powerbank with a capacity of 10,000 mAh, which will allow you to use the Mi 9 as a router all day without recharging.

FAQ: Answers to Frequent Questions