How to give away the Internet with Xiaomi Redmi Note 7: 4 ways and solutions to errors

Xiaomi Redmi Note 7 is still a popular device due to its balanced performance and reliable performance. One of the most popular features is the ability to distribute mobile Internet to other gadgets. This saves you when traveling, in the country or when the main Wi-Fi suddenly turned off, but not all users know how to properly set up an access point on this model, especially if it is about MIUI 12/13/14 firmware or custom builds.

In this article, we will look at all the current ways to distribute the Internet with the Redmi Note 7, from standard settings via menus to alternative methods using USB and Bluetooth. We will focus on typical errors (for example, when devices are connected but the Internet is not working) and how to fix them. If you encounter a problem that the access point goes off after 5 minutes or is not visible to other devices, here you will find solutions.

1. Preparation of the smartphone before the distribution of the Internet

Before you turn on the hotspot, make sure your Redmi Note 7 is ready for this task. Skipping these steps often causes handouts to crash.

First, check your mobile Internet balance and plan. Many operators (e.g. MTS, Beeline, Tele2) restrict or block the distribution of traffic at some tariffs. Check the terms with your provider - you may need to connect the option "Modem mode" or "Internet for devices."

Second, upgrade to the latest version of MIUI. Old builds (below MIUI 12.0.1) may lack important fixes for the Wi-Fi module. Check the version in Settings → About Phone → MIUI Version. If an update is available, install it through Settings → System Update.

Check the balance of mobile Internet with the operator|Update. MIUI last-minute|Battery charge of at least 30%|Turn it off. VPN (if used)|Make sure that SIM-card in slot 1 (recommended)-->

Also, pay attention to battery power. Internet distribution consumes energy — at a charge level below 20%, the smartphone can automatically turn off the access point. We recommend connecting the Redmi Note 7 to the charger if you plan to use it for a long time.

⚠️ Note: Some Redmi Note 7 firmwares have an access point that is unstable if SIM-The card is set in the second slot. Move it to Slot 1 and restart the phone.

2. Method 1: Distribute Wi-Fi through the standard settings menu

This is the simplest and most reliable method that works on all versions of MIUI. The instructions are relevant for firmware from MIUI 10 to MIUI 14.

Open the Settings app (the gear icon on the home screen) and go to Network and Internet → Access Point and modem. Here you will see the Wi-Fi Access Point option — tap it. Turn on the slider at the top of the screen. Now you have to configure the network settings:

• 🔄 Name of the network (SSID): Think of a unique name (for example, RedmiNote7_Hotspot). Avoid Cyrillic and spaces – some devices don’t see these networks.
• 🔒 Password: Minimum length is 8 characters. Use a combination of letters, numbers and characters (e.g, Xiaomi2026!).
• 📶 Frequency Range: Choose 2.4GHz for better compatibility with older devices or 5GHz for higher speed (but shorter range).
• ⏱️ Auto-Disable: Disable this option if you do not want the access point to shut down after 5-10 minutes without activity.

After saving the settings, other devices will be able to connect to your network. On the Redmi Note 7 with MIUI 12.5+ firmware, the Quick Access Point function has appeared - it automatically turns off the distribution when no device is connected to it, saving battery power.

Method 2: Quickly activate the access point via the notification panel

If you need to give the Internet out urgently, you can use the Quick Settings Panel, which saves time, but doesn't allow you to change the network name or password, because you use the settings you set earlier in the settings menu.

Swipe your finger down from top to bottom across the screen to open the notification bar. Find the Access Point icon (usually hidden — pull the panel down again to see all the icons). Task it once to turn on the hand. If the icon is missing, tap on the pencil (Edit) and add it to the active elements.

To turn off the access point, re-click on the icon or go to Settings → Access Point and modem. Note: with this method of turning on, the smartphone can automatically turn off the distribution after 10 minutes if the devices are not connected to the network.

💡

Add the access point shortcut to the home screen: Click the blank space on the screen → Widgets → Find the access point and drag it to a convenient location.

Method 3: Distribution of the Internet over USB (USB-modem)

If you do not have access to Wi-Fi (for example, the adapter broke on your laptop), you can distribute the Internet through the Internet. USB-This method is more stable than wireless and consumes less battery Redmi Note 7.

Connect your smartphone to your computer or laptop using the original cable USB Type-C. Notification will appear on the phone – select File Transfer mode (MTP) or USB-modem (on some firmware you need to manually enable this mode in Settings) → Access Point and modem → USB-modem).

On a Windows computer, wait for the drivers to install (usually automatically). Then open Network Settings → Ethernet — a new connection called Network Connection (Xiaomi) should appear. If the Internet doesn't work, check:

• 🔌 Is the cable connected to USB 2.0/3.0 port (some of the USB-C Hubs do not support modem modem mode).
• 🔄 Restart your phone and computer.
• 🛠️ Update drivers for Xiaomi through Device Manager (Network adapters section).

5. Method 4: Distributing the Internet over Bluetooth

This method is less popular, but useful if you want to connect a device without Wi-Fi (for example, an old printer or fitness bracelet), data transfer speeds will be lower than Wi-Fi or USB, but battery consumption is minimal.

Activate Bluetooth on both devices. On Redmi Note 7, go to Settings → Connection Devices → Bluetooth and find the target device in the list. After pairing, go back to Settings → Access Point and modem and turn on the Bluetooth modem option.

On a connected device (like a laptop), open Bluetooth options, find your Redmi Note 7 in the list, and select Connect via → Access Point. If the option is missing, update your Bluetooth drivers on your computer.

⚠️ Note: Some operators (e.g. MegaFon) block the distribution of Internet over Bluetooth at tariffs without the option “Modem mode.

Typical errors and their solutions

Even with the right setup, Redmi Note 7 users often face problems, and let’s look at the most common cases and how to fix them.

Problem 1: Devices connect to the hotspot, but the internet doesn’t work.

• 📵 Check if the mobile internet on the phone is enabled (Icon) 4G/LTE status-line).
• 🔄 Restart the phone and connected device.
• 📱 Make sure that SIM-card inserted into Slot 1 (on some firmware Slot 2 does not support distribution).
• 🛠️ Reset network settings: Settings → System system → Resetting settings → Resetting Wi-Fi, Mobile Network and Bluetooth.

Problem 2: The access point is turned off after 5-10 minutes.

This is related to energy saving settings. Open Settings → Battery and Performance → Select Battery Mode and Set Unlimited or High Performance. Also turn off the Auto Disable hotspot option in the modem settings.

Problem 3: Other devices don’t see the access point.

• 🔍 Check that the access point is enabled (Icon) 📶 status-line).
• 🔄 Change the frequency range from 5 GHz to 2.4 GHz (or vice versa).
• 📱 Make sure your phone is not on Airplane or Energy Saving.
• 🛠️ Update the firmware to the latest version – in old builds MIUI There were bugs with network visibility.

💡

If none of these methods worked, try resetting your network to factory settings, which will delete all stored Wi-Fi networks and passwords, but often solves Internet distribution problems.

7. Additional settings for experienced users

If standard methods are not satisfied with speed or stability, you can use advanced settings, for example, change the Wi-Fi channel or turn on maximum performance mode.

To do this, install the Mi Toolbox app (available on Google Play) or use the engineering menu. To open the engineering menu, enter the Phone app code:

##4636##

Go to Wi-Fi Information and find the Wi-Fi frequency band option, where you can manually set a channel (e.g. 6 for 2.4 GHz or 36 for 5 GHz) to avoid interference from other networks.

You can also include the option of Wi-Fi verbose logging in the engineering menu, which will help diagnose problems if the access point is unstable. /sdcard/wifi_log.txt.

FAQ: Frequent questions about giving away the Internet with Redmi Note 7