How to distribute the Internet from the phone Xiaomi: all ways and settings

Modern Xiaomi smartphones (including the Redmi and POCO lines) can work as full-fledged routers, distributing mobile Internet to other devices, a feature called a hotspot and come in handy when there is no Wi-Fi at hand and you need access to the network on a laptop, tablet or second phone, but not all users know how to properly configure the distribution, avoid errors and save battery power.

In this article, we will analyze all the current ways to distribute the Internet with Xiaomi – from classic Wi-Fi to the best. USB-modem and Bluetooth connections. You'll learn how to turn on the access point on different versions MIUI (including MIUI 14 and HyperOS), which settings optimize speed and stability, and how to solve typical problems such as the lack of Internet on connected devices. We will also focus on hidden features (for example, traffic restriction for connected gadgets) and nuances for specific models, such as Xiaomi 13 Pro or Redmi Note 12.

If you've ever seen a phone that doesn't want to give away the Internet or that it runs out quickly in modem modem mode, here's a proven solution. And for experienced users, we've prepared a section with alternative methods (for example, handing out via ADB or configuring IPv6 for compatibility with some carriers).

1. Preparation of Xiaomi phone for the distribution of the Internet

Before you turn on the hotspot, make sure your smartphone is ready for the task. Here are key points that are often overlooked:

• 📶 Mobile Internet: Data transfer should be active on the phone (3G/4G/5G). Check that the status bar shows the network icon (for example, 4G+ or 5G). If the internet doesn’t work, the handout won’t work either.
• 🔋 Battery Charging: Modem mode actively consumes power. Charge your phone to at least 40% or plug into the charger to avoid a sudden shutdown.
• 📱 Version. MIUI: The interface of settings may vary depending on the firmware. In this article, we focus on the MIUI 12-14 and HyperOS (for new models).
• 🔒 Operator restrictions: Some mobile operators (e.g. Tele2 or Iota) block the distribution of the Internet at certain rates.

Also check if the phone is power-saving mode activated – it can automatically turn off the hotspot when it’s low charge. Go to Settings → Battery and Performance → Power-saving mode and turn it off.

⚠️ Note: On some Xiaomi models (e.g, POCO F5) When the access point is first turned on, the system requests confirmation through SMS. If the message does not arrive, check the balance or restart the phone.

2. Method 1: Distribution of the Internet via Wi-Fi (access point)

This is the most popular and versatile method, and it's suitable for connecting laptops, tablets, other smartphones, and even smart TVs. Here's a step-by-step guide for MIUI 14 and HyperOS:

1. Open Settings (the gear icon on the main screen).
2. Go to the Network and Internet section (or Connections on some models).
3. Select Access Point and modem (in older versions – Modem Modem).
4. Slip on the Wi-Fi hotspot.
5. Activate the switch at the top of the screen.

After turning on, you can configure the network settings:

• 🔑 Name of the network (SSID): Give a unique name (for example, Xiaomi_Hotspot_123), It is easy to find your own point among others.
• 🔒 Password: By default, the system generates a complex key, but you can change it to a more memorable one (minimum 8 characters).
• 📡 Frequency Range: New models (Xiaomi) 13T, Redmi Note 12 Pro+) A choice between 2.4 GHz (long range) and 5 GHz (high speed) is available).

To connect to the network you are handing over from another device, find it in the list of available Wi-Fi networks, enter the password and confirm the connection. On the Xiaomi phone, the access point icon (two intersecting arrows) will appear in the status bar.

The connected device receives IP-address|In the status bar of the phone is burning the icon of the access point|Internet speed on the connected device is not less than 50% of the original|The phone does not overheat (temperature below 40).°C)

-->

Method 2: Distribution via Bluetooth (to save charge)

If you only need to connect one device (like a laptop or tablet) and save battery power, use a Bluetooth modem, which consumes less power than Wi-Fi, but the connection speed will be lower (up to 10-15 Mbps versus 50-100 Mbps for Wi-Fi).

Instructions for Xiaomi:

1. Turn on Bluetooth on both devices (the phone and the one that will connect).
2. On the phone go to Settings → Network and Internet → Access Point and modem.
3. Select a Bluetooth modem and activate the switch.
4. On a connected device (like a laptop), find a Xiaomi phone in the list of Bluetooth devices and pair.
5. After pairing in the laptop settings, select the option "Connect through the access point".

Bluetooth modems are convenient for long-term use, as they consume batteries 20-30% slower than Wi-Fi. However, note that some applications (such as online games or video calls) may not work stable due to limited bandwidth.

⚠️ Attention: On Windows devices 10/11 Sometimes you need to manually enable the option "Allow this device to access the network via Bluetooth" in the adapter settings. If the Internet does not appear, check these settings.

Method 3: Distribution via USB (for stable connection)

USB-The modem is the most reliable way to distribute the Internet, because it's interference-free and provides a stable speed. It's perfect for laptops, especially if you need to download large files or stream high-resolution videos.

How to set up USB-modem:

1. Connect your phone to your computer or laptop using the original USB-cable (preferably from the set).
2. On the phone, select File Transfer (or MTP) mode in the window that appears.
3. Open Settings → Network and Internet → Access Point and modem.
4. Activate the option. USB-modem.

After that, a new network connection should automatically appear on the computer.

• 🖥️ Check if drivers are installed for your phone (they are usually installed automatically when you first connect).
• 🔄 Restart your phone and computer.
• 🔌 Try another one. USB-port (preferably) USB 3.0 for maximum speed).

USB-The modem supports speeds up to 150-300 Mbps (depending on the phone model and the speed of the phone). USB-This method is also useful if the phone has a weak Wi-Fi module or you are in an area with severe radio interference.

5. Additional settings and optimization

To distribute the Internet worked stably and did not discharge the phone in an hour, use these tips:

Traffic Limitation for Connected Devices

If you have multiple gadgets connected to your access point, one of them can eat up all traffic (for example, when downloading updates). MIUI There is a built-in limitation function:

1. Go to Settings → Network and Internet → Access Point and modem → Settings of the Wi-Fi hotspot.
2. Select Data Limitation.
3. Set a limit (for example, 1 GB per day) and save the settings.

Changing Wi-Fi Channels to Reduce Interference

If the speed is low, your channel may be overloaded with other networks.

1. In the access point settings, tap on Additional (or Advanced settings).
2. Select Wi-Fi Channel and try options 1, 6 or 11 (they are the least intersected with other networks).

Turning off automatic shutdown

By default, Xiaomi can turn off the access point after 5-10 minutes without activity.

1. In the access point settings, find the option Automatic Shutdown.
2. Select Never or set a maximum time (e.g. 30 minutes).

💡

If you often share the Internet in one place (for example, at home), save the access point settings as a profile. To do this, in the Wi-Fi Access Point menu, click on the three dots in the upper right corner and select Save profile.

6. Solving common problems

Even with the right setup, you can have failures, and here are the most common problems and solutions.

The Internet is on your phone, but it doesn’t work on connected devices.

Reasons and methods of correction:

• 🚫 Operator blocks distribution: Check the tariff or call support (for example, MTS and Beeline have separate options for the modem).
• 🔄 Failure APN: Go to Settings. → SIM-maps and mobile networks → Access points (APN) Make sure you have the right profile (usually Internet or mms).
• 📵 Wi-Fi Interference: Change the channel or frequency range (from 2.4 GHz to 5 GHz or vice versa).

The phone is overheating or discharged quickly

The Internet is loading the processor and the communications module to reduce the heat.

• ❄️ Remove the phone (especially if it is tight).
• 🔋 Connect your phone to charge (preferably the original adapter).
• ⚙️ Reduce screen brightness and turn off background apps.

Devices cannot connect to the access point

If the gadgets "see" the network, but do not connect:

• 🔑 Check the correct password (registrar matters!).
• 📱 Restart the phone and connected device.
• 🔄 Reset the access point settings to standard (Settings) → Wi-Fi hotspot → Drop it).

⚠️ Note: Some Xiaomi models (e.g. Redmi) 9A) post-update MIUI 13 may be missing option USB-In this case, resetting network settings (Settings) will help. → System system → Resetting settings → Reset the network settings).

7. Alternative methods of Internet distribution

If the standard methods don’t work or you need advanced features, try these options:

Distribution via ADB (for experienced users)

With Android Debug Bridge, you can turn on the access point even if it is blocked by the operator.

1. Turn on USB Debugging in Settings → About Phone → MIUI version (tap 7 times on version number, then go back to Additional → For Developers).
2. Connect the phone to your computer and open the command line (cmd on Windows).
3. Enter the command: adb shell settings put global tether_dun_required 0
4. Restart your phone and try to turn on the access point.

IPv6 for compatibility with some carriers

If you have an MTS or Beeline operator and the Internet through the access point is unstable, try to turn on IPv6:

1. Go to Settings. → SIM-maps and mobile networks → Name of the access point (APN).
2. Select your APN and in the APN Type field add,dun at the end (e.g. default,dun).
3. In the APN Protocol field, select IPv4/IPv6.
4. Save the settings and restart the phone.

Use of third-party applications

If the built-in access point is unstable, try apps like PdaNet+ or ClockworkMod Tether.

• 🔗 Distribute the Internet via Wi-Fi Direct (without password).
• 📊 Tracking traffic of connected devices in real time.
• 🔒 Block access to certain sites or applications.

However, note that many of these apps require root rights, which may take away your warranty.

💡

If standard methods don’t work, check APN settings and operator restrictions first, then resort to alternative methods (ADB, third-party applications) as they may violate the tariff terms.

8. Frequently Asked Questions (FAQ)