How to distribute the Internet from Xiaomi phone to tablet: all ways + error solving

Modern Xiaomi smartphones (including the Redmi, POCO and Mi lines) can work as full-fledged routers, distributing mobile Internet to other devices - tablets, laptops or even Smart TV. This feature is called an access point (or modem), and it saves when there is no Wi-Fi at hand, and access to the network is urgently needed. But how to properly configure the distribution so that the connection is stable, and the phone battery does not sit down in 30 minutes?

In this article, we will discuss all possible ways to distribute the Internet from Xiaomi phone to tablet: via Wi-Fi, Bluetooth and even USB (if supported); separately, we will focus on typical errors (for example, when the tablet “sees” the network but does not connect) and give tips on saving charge during long-term distribution. All instructions are relevant for MIUI 14/15 and newer versions, but they will also work for older models - taking into account the features of the firmware.

1. Preparation of Xiaomi phone for the distribution of the Internet

Before you turn on the hotspot, make sure your Xiaomi is ready for the role.

• 📶 Mobile Internet: Data transfer should be active on the phone (3G/4G/5G). Check that the status bar displays network icons (for example, 4G+ or 5G).
• 🔋 Battery charge: Internet distribution is very energy-consuming, optimal if the charge is above 50%, and at a level below 20%, the phone can automatically turn off the access point.
• 🔒 Operator restrictions: Some mobile operators block the distribution of the Internet (especially at unlimited rates.
• 📱 Version. MIUI: On old firmware (up to) MIUI 12) the settings menu may differ. Update the system in Settings → The phone. → Updating the system.

If you use two of them SIM-Select the one you will be giving out the Internet through. → SIM-maps and mobile networks → Transfer of data and specify the required SIM. Note: On some models (e.g. Redmi Note 10 Pro), the access point only works through the main one. SIM-map.

⚠️ Warning: If the phone is enabled mode Save traffic (in Settings) → Connections and sharing → Save traffic, Internet distribution may not work smoothly. Disable this option before setting up.

2. Internet distribution via Wi-Fi (Access Point mode)

This is the most popular and convenient way, and your Xiaomi is building its own Wi-Fi network to connect a tablet, laptop, or other device.

Step-by-step:

1. Open the settings on your phone.
2. Go to Connections and Sharing (on some models, the Network and the Internet).
3. Select modem modem and access point.
4. Slip on the Wi-Fi hotspot.
5. Activate the slider at the top of the screen.
6. When you first turn on, the system will suggest setting the network name (Access Point Name) and password.

Now, on your tablet, find the network you created in the Wi-Fi list, enter your password and connect. If done correctly, an icon will appear in the status bar of the phone. 📶→📱, On the tablet - an indicator of Internet connection.

Network Name (SSID) on phone and tablet match |

Password entered without errors (registration is important!)|

Mobile data transfer enabled on the phone |

The tablet is in the Wi-Fi coverage zone (no further than 10 meters)-->

On Xiaomi models with Qualcomm Snapdragon 8xx chipset (for example, Xiaomi 12 Pro or POCO F4 GT), the access point supports the Wi-Fi 6 standard, which provides speeds up to 1 Gbps. On budget devices (Redmi 9A, POCO M3), the maximum speed is limited to 150-300 Mbps.

3. Alternative ways of distributing the Internet

If Wi-Fi is not suitable for some reason, you can use other methods:

3.1. Distribution via Bluetooth

This method is slower than Wi-Fi (maximum 10-20 Mbps), but more economical in battery charge, suitable for transferring small amounts of data (for example, for instant messengers or mail).

How to set up:

1. Turn on Bluetooth on your phone and tablet.
2. Connect devices: on your phone go to Settings → Bluetooth, find the tablet in the list and confirm the connection.
3. Return to modem modem and access point and activate Bluetooth modem.
4. On the tablet in Bluetooth settings, find your Xiaomi and turn on the Internet access option.

Distribution via USB (USB-ethernet)

The most stable, but least convenient way, if you have a tablet, it's fine. USB-port OTG). The speed is comparable to Wi-Fi, and the phone’s charge is almost not consumed (as it is recharged from the tablet).

Limitations:

• ⚠️ Not all Xiaomi models (requires USB-ethernet support).
• ⚠️ I need a cable. USB-C — USB-C adapter OTG.
• ⚠️ On the tablet, you may need to manually configure the network (IP, DNS).

To activate the distribution via USB:

1. Connect your phone to the tablet with a cable.
2. In the phone settings go to modem modem and access point → USB-modem.
3. On the tablet in the network settings, select Ethernet (or USB-network).

Wi-Fi (access point) |

Bluetooth|

USB|

I don't use the handout.-->

Typical problems and their solutions

Even after setting it up correctly, you can still get errors.

If the tablet connects to the access point, but the Internet is not working, try the following:

1. Reboot both devices.
2. On the phone, turn off and turn on Data Transfer again.
3. Check if the tablet is not enabled Flight mode or VPN.

⚠️ Attention: On some firmware MIUI When you update, you reset the access point settings. If the distribution stops working after you upgrade, reset the network name and password.

5 How to save battery power when giving the Internet

Wi-Fi can eat up to 20 to 30 percent of the charge per hour to extend the phone's life.

• 🔌 Connect charging: If possible, recharge your phone while handing out.Use the original Xiaomi power supply (especially for fast-charging models like Xiaomi) 13T Pro).
• 📉 Limit background processes: Close unnecessary apps on your phone. Enable Power Saving mode (but not Ultra Mode - it can turn off the access point).
• 📶 Reduce signal power: In the access point settings (More) select 2.4 GHz instead of 5 GHz – this will reduce power consumption (but also speed).
• ⏱️ Set the timer: In Settings → Modem mode → The timer can be set to automatically disable the access point after a certain time.

On large-battery models (such as the POCO M5s with a 5000 mAh battery), the handout will last longer, but even they will run out in 4-5 hours of active use. If you need a long connection, use Power Bank or USB distribution (if the tablet supports OTG).

💡

If you’re a frequent Internet user, buy a battery case for Xiaomi. For example, Xiaomi Mi Power Bank 30W can charge your phone at the same time and provide a stable handout for up to 8-10 hours.

6. Security in the distribution of the Internet

Open access points are a potential threat to your data.

• 🔐 Use a complex password: At least 12 characters with numbers and special signs. Avoid simple combinations like 12345678.
• 👥 Limit the number of connected devices: In the access point settings (max. connected devices), set a limit (for example, 2-3).
• 🔄 Change your password regularly: Especially if you’ve been giving out the internet in public places.
• 🛡️ Turn off the access point when it is not needed: Prolonged modem operation increases the risk of attack.

MIUI firmware has a Hidden Network feature (in the AP settings) that if you turn it on, your network won't show up in the public Wi-Fi list, which adds protection, but you'll have to manually type the network name (SSID) on the tablet.

If you suspect that your access point has been connected by strangers, check the list of devices in Settings. → Modem mode → Wi-Fi hotspot → Connected devices. It shows all the gadgets that use your Internet. MAC-addresses can be blocked.

7. Features for different Xiaomi models

Not all Xiaomi smartphones are equally good at being a router, here’s what you need to know about the popular series:

On flagship models (for example, Xiaomi 14 Ultra) there is a dual access point feature – you can distribute the Internet simultaneously over Wi-Fi and Bluetooth. This is convenient if you want to connect a tablet over Wi-Fi and a smartwatch over Bluetooth.

For older devices (e.g., Redmi) 4X or Mi A1) You may need to manually adjust APN (If the Internet is not distributed, check the settings in Settings → SIM-maps and mobile networks → Access points (APN). Usually, it is enough to reset the settings. APN standard.

8. Frequent Questions (FAQ)