How to give the Internet from Xiaomi to a laptop: all ways + error solving

Why Xiaomi smartphone can not give the Internet to the laptop?

Modern Xiaomi smartphones (including Redmi, POCO and flagship series) support modem modem mode, but users often face problems: the access point does not turn on, the laptop “can’t see” the network, the speed drops to an unacceptable level, the reasons lie in the settings of the phone and in the features of the MIUI operating system.

For example, in MIUI 14+ The default activates traffic saving, which can block data transmission in modem mode, and Windows 11 laptops sometimes have restrictions on connecting to "untrusted" networks. We will analyze all the nuances - from the basic setting to solving rare errors, including the problem with the problem of the problem. IP-address 169.254.x.x, which arises in the context of conflict DHCP.

Method 1: Distribution of the Internet via Wi-Fi (access point)

This is the most versatile method, working on all Xiaomi models – from Redmi Note 8 to Xiaomi 14 Ultra. Data transfer speed depends on your phone’s Wi-Fi standard: for example, Xiaomi 13 Pro with Wi-Fi 6E will provide up to 1.2 Gbps, whereas budget models are limited to Wi-Fi 5 (~400 Mbps).

To enable the access point:

1. Open Settings → Connections and Sharing → Modem Modem.
2. Activate the Wi-Fi Access Point switch.
3. Click Access Point Settings to Ask: 🔐 Name of the network (SSID) — Latin, no gaps; 🔒 Password (minimum 8 characters, it is recommended to mix letters and numbers); 📶 Range: 2.4 GHz (best compatibility) or 5 GHz (higher speed but smaller radius).

Connect your laptop to the network by entering a password.

If the laptop is not connected:

• 🔄 Reboot your phone and laptop – it will reset the cache of network settings.
• 📱 On your phone, turn off Adaptive Wi-Fi in Settings → Wi-Fi → Additionally.
• 💻 On your laptop, update the Wi-adapter driver through Device Manager.

💡

If the speed of the transfer drops sharply after 5-10 minutes, check the battery saving settings: in Settings → Battery → Application selection add modem modem to exceptions.

Method 2: Connecting via USB (the most stable method)

Internet distribution USB-The cable has two key advantages: minimal speed losses (up to 90% of the original) and automatic charging of the phone while running. However, this requires an original cable with data transmission support (cheap charging cables often do not work).

Instructions:

1. Connect your phone to your laptop with the original cable (preferably from the kit).
2. On your phone, select File Transfer Mode (not Charging).
3. Go to Settings → Connections and Sharing → Modem Modem.
4. Activate. USB-modem.

Use the original Xiaomi cable|Insert the "File transfer" mode"|Turn off battery savings for "Modem Modem"|Update the driver RNDIS PC-only-->

Method 3: Distribute via Bluetooth (slowly but sparingly)

This method is suitable for emergency cases when other methods are not available. Speed is limited by Bluetooth 5.0 standard (up to 2 Mbps), but battery consumption is minimal - ideal for long-term operation without an outlet.

How to set up:

1. Turn on Bluetooth on your phone and laptop.
2. Connect the devices (confirm the connection code on the phone).
3. On your phone, go to Settings → Connections and Sharing → Modem Modem.
4. Activate the Bluetooth modem.
5. On a laptop in Network Settings, select a connection via Bluetooth network.

⚠️ Attention: In Windows 10/11 Sometimes you need to manually add a new connection through the Control Panel → Network and Internet → Network control centre → Set up a new connection by selecting an Internet connection via Bluetooth.

If the connection is interrupted:

• 📱 On your phone, turn off Adaptive Bluetooth in wireless network settings.
• 💻 On your laptop, update the Bluetooth adapter driver (especially relevant for Lenovo laptops and laptops). HP).
• 🔋 Make sure the phone is enabled High performance in the battery settings.

Method 4: Distribution via Ethernet adapter (for advanced)

If you support Xiaomi OTG (For example, the Redmi Note 12 Pro+ or POCO F5), You can connect your phone to your laptop via an Ethernet adapter (sold separately for a laptop). ~500₽). This method provides maximum stability and speed comparable to wired Internet.

What you need:

• 🔌 USB-C/OTG → Ethernet adapter (Recommended models on the Realtek chip) RTL8153);
• 📦 Ethernet cable (twisted pair);
• 🔧 The developer mode should be enabled on the phone and USB-debugging.

Procedure:

1. Connect the adapter to the phone and the cable to the router or directly to the laptop.
2. On the phone in Settings → System system → Developer mode turn on USB-debugging.
3. Install ClockworkMod Tether (for Windows) on your laptop or set up reverse tethering manually.

Addressing common mistakes

Even with the right setup, there can be problems, and here are the most common ways to fix them:

1. "No Internet access" error when connecting

Cause: conflict DHCP-servers or operator lock-in.

• 📵 Check the balance of the mobile Internet – some operators (for example, Tele2) block the distribution at zero count.
• 🔧 On the phone in the settings of the access point, change the Range IP s 192.168.43.x on 192.168.1.x.
• 🖥️ On a laptop in the properties of the connection, turn off IPv6.

2.Access point shuts down after 5 minutes

This is due to the energy saving settings in MIUI.

Decision:

1. Go to Settings → Battery → Selection of applications.
2. Find modem modem and select No restrictions.
3. Turn off Adaptive Brightness and Battery Savings during the handout.

3.The laptop does not see the Wi-Fi network from Xiaomi

Possible causes:

• 📡 Hidden mode is enabled on the phone (turn off in the access point settings).
• 🔄 Wi-Fi Channel Conflict – Try manually setting a 6 or 11 channel to 2.4 GHz.
• 🚫 Laptop antivirus blocks new networks (for example, Kaspersky or Avast).

💡

If the distribution is not working after all the manipulations, check whether the mobile operator blocks tetering. For example, MTS and Beeline may restrict the function at some tariffs without additional option.

How to increase the speed of distribution of the Internet

If the speed is lower than expected, try these methods:

For maximum productivity:

• 📶 Use 5 GHz (if the laptop supports).
• 🔋 Connect your phone to charge – with low battery levels MIUI Automatically restricts speed.
• 🛑 Close background apps that consume traffic (e.g. YouTube, TikTok).
• 🔄 Reboot your phone before handing out – this clears the cache of network settings.

FAQ: Frequent questions about giving out the Internet with Xiaomi