How to give away the Internet with Xiaomi Redmi 9C: 5 ways + error solving

Xiaomi Redmi 9C is one of the most popular budget smartphones that does a great job as a mobile router. It can be distributed in 2 clicks, but many users face nuances from operator limitations to sudden failures in the access point. In this article, we will analyze all possible ways to distribute the Internet (including hidden MIUI functions), optimal settings for a stable signal and solving typical problems – from the error “failed to enable access point” to slow speed on connected devices.

It’s important to understand that the process can vary depending on the version of MIUI firmware (on the Redmi 9C out of the box, MIUI 12 or MIUI 13 is usually used, but many are upgraded to MIUI 14). We’ll take all the options into account, and also tell you how to get around the limitations of mobile operators, which sometimes block traffic. If you want to not just turn on the hotspot, but set it up as efficiently as possible – with the right network name, password and Wi-Fi channel – read on.

1. Basic method: mobile access point via settings

This is the simplest and most reliable method that works on all versions of the Redmi 9C. The main advantage is that it does not require root rights or additional applications.

1. Open the Settings app (the gear icon on the home screen).
2. Go to the section Network and Internet → Access Point and modem.
3. Slip on the mobile access point.
4. Activate the slider at the top of the screen, and if you see a Wi-Fi blackout alert, confirm the action.

After activating your Redmi 9C It's going to start distributing the Internet over Wi-Fi (SSID) You can see the default password in the same menu or change them (we'll talk about this in the next section). SIM-map for distribution in the menu Mobile network → Name of the access point.

Mobile Internet is on SIM-map

Enough money (some operators block the distribution with zero balance)

The correct APN is selected in the network settings (usually "internet" or "online")

VPN and proxy are disabled (they may conflict with the access point)

-->

If the access point indicator flashes after turning on, but the devices don't connect, try rebooting your smartphone. Sometimes resetting your network settings helps: Settings → System → Resetting → Resetting your Wi-Fi, mobile network and Bluetooth settings.

2. Network Name (SSID) and Password Setup for Security

Standard network name (Redmi_XXXX) And the password is easy to remember, but you better change it -- especially if you give out the Internet a lot in public:

1. In the Mobile Access Point menu, tap on the Access Point Settings.
2. In the Network Name field, enter the desired name (for example, MyRedmi_Hotspot). Avoid Cyrillic and special symbols – some devices do not support them.
3. In the Password field, specify a reliable key (minimum 8 characters, preferably with numbers and letters).
4. In the Security section, select WPA2-PSK (the most secure option).
5. Press Save.

Security advice: Don’t use simple passwords like this 12345678 It's called qwerty, and it's like an attacker can connect to your network and steal traffic, and the best way to do that is to use a combination of the type. R3dM1_2026!Hot.

You can also set up in this menu:

• 🔄 Auto-disconnection – the access point will shut down after a predetermined time without active connections (saves battery power).
• 📶 Frequency Range – Choose 2.4GHz for better compatibility or 5GHz for higher speed (if your Redmi is yours) 9C supportive).
• 📱 Max: Device number 8, but can be reduced to 4 for stability.

💡

If you often distribute the Internet in one place (for example, at home), set a static system. IP-Address for connected devices, which will speed up their connection in the future.

3. Alternative ways of distributing the Internet

If the standard method doesn't work (e.g., the operator blocks the distribution), you can use workarounds. Here are 4 proven options:

Method 1: USB-modem (for PC)

Get Redmi on board. 9C computer-to-computer USB-cable, then:

1. Turn on USB Debugging in Settings → About Phone → MIUI version (shap 7 times, then go back to Additional Settings → For Developers).
2. In the menu, activate the Access Point and modem USB-modem.

The computer will get access to the Internet via a smartphone. Minus: the phone will charge slower due to simultaneous data transfer.

Method 2: Bluetooth modem

Suitable for Wi-Fi-free devices (such as some tablets or older laptops):

1. Turn on Bluetooth on both devices and pair them.
2. In the Access Point and modem menu, activate the Bluetooth modem.

Speed will be lower than Wi-Fi, but less battery is consumed.

Method 3: Distribution applications (if the operator blocks a standard hotspot)

Some applications (such as PdaNet+ or ClockworkMod Tether) may bypass carrier restrictions, and note that they may require root access to work, as well as:

• ⚠️ The risk of blocking SIM-Cards for Violation of Operator Rules.
• ⚠️ There may be compatibility issues with new versions MIUI.

Method 4: Modem modem via ADB (for advanced)

If the operator blocks the distribution at the APN level, you can try to turn on the hotspot via ADB:

adb shell settings put global tether_dun_required 0

This command disables DUN (Dial-Up Networking) verification, a feature that some operators use to block the distribution. Attention: requires USB debugging enabled and ADB drivers installed on the PC.

Mobile hotspot (Wi-Fi)

USB-PC modem

Bluetooth modem

Applications for bypassing locks

Another way.-->

4. Optimization of connection speed and stability

If the Internet through the access point is slow or constantly interrupted, try these settings:

Critical setting for Redmi 9C: If you have speed issues, check the Maximum Transmission Unit (MTU) setting in the APN settings. The optimal value for most operators is 1472.

1. Go to Settings. → SIM-maps and mobile networks → Name of the access point (APN).
2. Choose your APN (usually online or online).
3. In the MTU field, enter 1472 and save.

It’s also worth turning off automatic application updates in the background, as it can eat up traffic and slow down speeds for connected devices. You can do this in Settings → Apps → App Management → Google Play Market → Data → Background data transfer.

5. Solving common mistakes

Even with the right settings, you can have failures, and here are the most common errors and solutions.

Error: "I failed to turn on the access point"

Causes and solutions:

• 📵 Operator blocking distribution → Try changing. APN on the Internet or contact the operator support.
• 🔧 Failure in MIUI → Restart your phone or reset your network settings (Settings) → System system → Resetting settings → Resetting network settings).
• 🛑 Tariff restriction → Check the terms of your fare (some operators only allow distribution at paid rates).

Error: "Connected but no Internet access"

This is most often a problem on the side of the connected device.

• 🔄 Reboot both devices (smartphone and what connects).
• 📱 On a connected device, “forget” the network and connect again.
• 🛠️ Manually prescribe DNS on a connected device (e.g., 8.8.8.8 and 8.8.4.4 from Google).

Error: The access point itself is shut down

This may be related to:

• ⚡ Saving charge → Turn off Battery mode. → Ultraeconomic regime.
• 🕒 Auto-disconnection → Install the access point settings Never instead of 5/10 minute.
• 📴 Overheating of the phone → Remove the case and let the smartphone cool down.

⚠️ Note: If you are using Redmi 9C custom-made firmware (not official) MIUI), Internet distribution may not work due to the lack of drivers for the Wi-Fi module. In this case, only flashing to the official version will help.

6. How to save traffic when giving out the Internet

Smartphone Internet can quickly eat up all traffic, especially if multiple devices are connected to the network.

• 📊 Set a traffic limit in your settings SIM-maps (Settings) → SIM-maps and mobile networks → [yours SIM] → Traffic warning).
• 🚫 Block background traffic for unnecessary apps (Settings) → Annexes → Data management).
• 📱 Disable application auto-update and backup over mobile network.
• 🎮 Limit online gaming and streaming – they consume the most traffic.

You can also use traffic monitoring apps like My Data Manager or GlassWire, which show you which apps on connected devices are using the most data.

Hidden life hack for Redmi 9C: If you're giving the Internet to a laptop, turn on the plane mode, and then manually activate only Wi-Fi, which will prevent traffic from leaking through the background processes. Windows/macOS.

7. Comparison with other Xiaomi smartphones

If you’re looking at the Redmi 9C as a constant source of internet for other devices, it’s helpful to know how it compares to other Xiaomi models in key ways:

As you can see from the table, Redmi 9C Loses to flagships in speed and support 5 GHz, but wins in autonomy - thanks to the battery on the 5000 It can distribute the Internet all day without recharging. If you need high speed (for example, for online games or for online games). 4K-streaming, consider models that support Wi-Fi 5/6.

FAQ: Answers to Frequent Questions