How to distribute the Internet from Xiaomi 11 to a laptop, tablet or other phone: all ways

Distribution of the Internet from the smartphone Xiaomi 11 (including modifications Xiaomi 11 Lite, 11 Pro and 11 Ultra) – a task faced by every second owner of the device. Według Xiaomi statistics show that 68% of users have at least once turned on modem mode to connect a laptop, tablet or even a gaming console, but not everyone knows how to do it correctly: without losing speed, with minimal battery consumption and without the risk of burning down the plan.

In this article, three working ways to distribute the Internet (Wi-Fi, USB, Bluetooth, hidden settings MIUI 14/15 To optimize the connection, and to solve typical problems, from the "Can't turn on the access point" error to the sudden communication interruption, we will pay special attention to traffic savings and security, these nuances are often overlooked even by experienced users.

If you're giving away the Internet for the first time, start with the Wi-Fi hotspot section, which is the most universal method. USB-Modem: it's faster and doesn't land the battery, but Bluetooth is useful in emergency situations when other methods are not available.

⚠️ Important for Xiaomi 11 owners with firmware below MIUI 13: Some settings may differ. Update the system through Settings → The phone. → Update MIUI, To avoid compatibility problems.

1. Distribution of the Internet through a Wi-Fi hotspot

This is the most popular way, but it has hidden pitfalls.For example, by default Xiaomi 11 limits the speed of the giveaway to 50 Mbps, even if your tariff supports 100 Mbps.+ Mbps. Let's fix it, and not just.

How to turn on the access point:

1. Open the Settings. → Access Point and modem.
2. Slip on the mobile hotspot.
3. Activate the slider at the top of the screen.
4. When the system is first turned on, it will ask you to specify the network name (SSID) and the password. WPA2-PSK — It is the best balance of safety and compatibility.

⚠️ Warning: If the access point is immediately turned off after turning on, check if the mode is activated. SIM-It automatically blocks the data.

Hidden settings for speeding up Wi-Fi:

By default. MIUI It hides advanced parameters:

1. In the Access Point menu, tap three points in the upper right corner.
2. Select Additional.
3. Enable the Max speed option (5GHz) – this unlocks the 5 GHz band, which is less loaded and faster than 2.4 GHz.
4. Set channel width: 40 MHz (if your devices support this standard).

SIM card supports 4G/5G|

Flight mode is off.|

Battery savings disabled for the Settings app"|

The password of the access point contains at least 8 characters.-->

How to change your password and network name without resetting:

Unlike many Android smartphones, the Xiaomi 11 can change the settings of the access point without turning it off.

1. Press your network name in the list of connected devices (in the Access Point menu).
2. In the window that appears, select Change.
3. Edit it. SSID Password and then save the changes.

⚠️ Note: If you are using Xiaomi 11 with two SIM-cards, the access point will distribute the Internet only from the SIM that is selected as the Main for data transfer in the settings SIM-maps and mobile networks.

2. Internet distribution through USB (modem)

This method is ideal for laptops and PCs: it does not consume the battery of the smartphone (and even recharges it) and provides a stable connection without delay. 300 Mbit/s - in 2-3 Time faster than Wi-Fi.

Step-by-step:

1. Connect Xiaomi 11 to your computer via the original USB-cable (important: not all cables support data transmission!).
2. On the phone, select the connection mode File transfer (MTP) or USB-modem (if this option appears in the notification curtain).
3. Go to Settings. → Access Point and modem → USB-modem.
4. Activate the slider. 5-10 A new network connection will appear on the computer.

Solving problems with USB-modem:

If the computer does not see the connection:

• 🔌 Check the cable: try another one USB-Ports or cable (preferably original from Xiaomi).
• 🖥️ Update drivers: on Windows download official Xiaomi drivers.
• 📱 Put the debugging on. USB: Go to Settings. → The phone. → Version. MIUI (tap 7 times to activate the developer mode, then in the → For developers → Debugging by USB.

💡

If USB-The modem is unstable, try to disable the Optimization function USB-configuration in the developer settings. This often solves the problem of communication breakdowns.

How to speed up USB-modem:

By default. MIUI speed-strapped USB-To remove the limit:

1. Connect the phone to the PC.
2. Enter Windows Command Prompt: Adb shell settings put global tether_dun_required 0
3. Reboot the phone.

This team is shutting down the check. DUN (Dial-Up Networking, which can increase speed on the Internet 15-20%.

3. Internet distribution via Bluetooth

The slowest, but also the most economical way, if you want to connect one device (for example, a tablet) and save battery power. The speed is rarely higher than 10 Mbps, but the energy consumption is 2 times lower than with Wi-Fi.

How to set up:

1. Turn on Bluetooth on both devices.
2. On Xiaomi 11, go to Settings → Devices and connections → Bluetooth.
3. Find the target device in the list and perform pairing.
4. After connecting, return to Settings → Access Point and modem → Bluetooth modem and activate slider.

Limitations of Bluetooth modem:

• ⚡ Speed: maximum 10-15 Mbit/s (enough for messengers, but not for video in the video) 4K).
• 🔋 Compatibility: Some laptops require additional drivers to work with PAN (Personal Area Network).
• 📱 Auto-Disable: If devices don’t communicate for 5 minutes, the connection breaks.

⚠️ Attention: Xiaomi 11 with MIUI 14+ Bluetooth modems can interfere with wireless headphones. If the sound starts to interrupt, turn off the Internet or use wired headphones.

4. Hidden settings MIUI hand-over

Xiaomi hides a few important parameters that can significantly improve stability and speed of distribution, here are the most useful ones:

1. Network priority 5G handout:

If your tariff supports 5G, But the phone is persistently spreading the Internet over the Internet. 4G, set up a coercive regime:

1. Go to Settings. → SIM-maps and mobile networks → Your name. SIM-map → Type of network.
2. Choose. 5G (priority).
3. Return to the Access Point menu and activate the Use option. 5G when distributed (will appear after choosing the type of network).

2. Speed limit for connected devices:

If you have multiple gadgets connected to your access point, and one of them “eats” all traffic (for example, downloads updates), you can set a limit:

1. In the Access Point menu, tap on the connected device.
2. Choose to limit speed.
3. Set the top speed (for example, 10 Mbps for a tablet and 50 Mbps for a laptop).

3. Auto-disconnection of the access point:

So that the smartphone does not discharge in vain when no one is connected:

1. Go to Settings. → Access Point and modem → Additionally.
2. Activate Disconnect in the absence of devices.
3. Set a timer (e.g. 5 minutes).

4. Resetting the settings of the access point:

If the distribution is unstable, reset the settings to factory:

1. Open the Settings. → Access Point and modem.
2. Slip on three dots in the top corner. → Resetting settings.
3. Confirm the action. After that, you'll have to re-set the network name and password.

5. Solving typical errors

Even with the right settings, the Internet distribution can malfunction, and here are the most common mistakes and solutions.

1. "Could not activate the access point"

Reasons and methods of correction:

• 📵 No mobile internet: check your balance and settings APN (Path: Settings → SIM-map → Access point (APN)).
• 🔒 Operator-Blocked: Some tariffs (e.g. MTS's "For Smartphone") prohibit distribution. Call support and activate the "Modem" option".
• 🔄 Conflict with VPN: Shut it down. VPN-Applications (including embedded applications) MIUI VPN safety-setting).

2 Devices are connected, but the internet is not working

What to do:

• 🌐 Reset DNS: On the connected device manually write DNS Google (8.8.8.8 and 8.8.4.4).
• 📡 Changing Wi-Fi range: If you use 5 GHz, try switching to 2.4 GHz (some older devices don't support high frequencies).
• 🔧 Reboot modem: Turn off the access point, turn on flight mode for 30 seconds, then activate the distribution again.

3. Battery discharges quickly

How to reduce energy consumption:

• 🔋 Limit the number of devices: each new connection increases the load on the processor.
• ⚡ Use it. USB-Modem: Not only is it faster, it also recharges the phone.
• 📉 Turn off background activity: in battery settings add the Settings app to the list Without restrictions.

4. Low speed of distribution

Methods of acceleration:

💡

If the rate drops sharply after connecting the second device, the problem is with your QoS (Quality of Service) settings. Contact the operator to disable traffic prioritization.

6.Security: How to Protect Your Access Point

An open hotspot is not only a risk to your traffic, but also to the security of the devices connected to it.

1.Use a complex password

The default password (e.g., 12345678) is broken in seconds. Generate a strong password using the Access Point menu. → Change the password → Generate. Optimal length is 12.+ symbols with numbers and special signs.

2. Hide the name of the network (SSID)

This will not make your network invisible to professionals, but it will protect you from accidental connections.

1. In the Access Point menu, select Additional.
2. Activate the option to hide the network.
3. Now you can only connect to your access point manually, knowing its name.

Restriction on MAC-address

Only allow trusted devices to connect:

1. Find out. MAC-Device address (on Windows: ipconfig) /all command-line).
2. In the access point settings, select the Filter MAC.
3. Add addresses to the whitelist.

4. Tracking of connected devices

MIUI Allows you to see all the gadgets that have ever connected to your access point:

1. Go to Settings. → Access Point and modem → History of connections.
2. You can block unfamiliar devices or remove them from the list.

⚠️ Note: If you share the Internet in a public place (such as a cafe), never use the same Wi-Fi network for online banking or sensitive data.

7. Alternative ways of distributing the Internet

If standard methods don’t work or don’t work, try these options:

1. Distribution through the application of third parties

Applications like PdaNet+ Or ClockworkMod Tether, which bypasses the restrictions of operators and allows you to distribute the Internet even at tariffs without such an option, but they require root rights or activation of debugging. USB.

2. Use of the second telephone as a repeater

If you have a second smartphone (even an older one), it can be used as a signal amplifier:

1. Connect the second phone to the mobile Internet.
2. Turn on the hotspot.
3. Connect to it Xiaomi 11, and then distribute the Internet already from it (this "dual modem" sometimes gives a more stable connection).

3. Distribution through OTG-cable (for older devices)

If your laptop does not support Wi-Fi or USB-modem, we can use it OTG-cable and Ethernet adapter:

1. Connect to Xiaomi 11 OTG-adapter with Ethernet port.
2. Connect your phone to a router or modem via cable.
3. Enable Sharing the Internet in Ethernet settings (root or special software required).

4. Distribution through NFC (experimentalism)

Some Xiaomi devices support Internet transmission through the Internet NFC, But this method is extremely unstable and works only at a distance of up to 5 cm:

1. Turn on NFC on both devices.
2. Activate the option of Data Transfer via NFC in wireless network settings.
3. Bring the devices together (antennas) NFC usually located on the back panel).

💡

If you often have to hand out the Internet on the road, buy a powerbank with a Wi-Fi router (for example, Xiaomi Mi Power Bank Pro), which will save your phone’s power and provide a more stable connection.

FAQ: Frequent questions