How to Connect Wi-Fi on a Xiaomi TV: Instructions for All Models (2026)

Xiaomi TVs today are not just TV viewing screens, but full-fledged multimedia centers with access to YouTube, Netflix, Prime Video and other services, but without an Internet connection, all of this functionality remains unavailable. Most users choose to connect wirelessly via Wi-Fi, which is more convenient than wired Ethernet, and does not require additional cables.

However, the process of setting up Wi-Fi on Xiaomi TVs (be it Mi) TV 4A, Mi TV Q1 or Redmi Smart TV X) may raise questions, especially for those who are first-time users of smart tech. In this article, we will explore all possible ways to connect to Wi-Fi, including manually configuring, using, and using the technology. WPS, It also solves common problems, such as authentication errors or the lack of network in the list. MIUI TV and features of working with dual-band routers.

If your TV doesn't see the network, or if it's constantly losing connection, or if it requires a password, despite the right input, you'll find step-by-step solutions here, and for those who want to optimize the speed and stability of Wi-Fi, we've prepared guidelines for choosing a router channel and setting up a DNS.

1. Preparation for Wi-Fi connection: what to check before setting up

Before you start setting up Wi-Fi on a Xiaomi TV, make sure that all external factors do not interfere with the process. Often, the connection problems are not related to the TV itself, but to the router or network settings.

Here is the mandatory checklist before setting up:

Pay special attention to the mode of operation of the router. Xiaomi TVs work best with networks in the 2.4 GHz band - they are more stable for streaming video than 5 GHz, despite the fact that the latter offers high speed. If your router supports both bands, we recommend temporarily disabling 5 GHz during setup (this can be done in the router's web interface at 192.168.0.1 or 192.168.1.1).

Also check if the router is not on the filter on the MAC-Some Xiaomi models (e.g. Mi) TV 4S 55" may interfere with this function, which will cause the connection to reset every few minutes. MAC-TV address in the list of allowed devices (you can find it in the settings of TV: Settings) → On TV. → Status).

2. Standard method: Connect to Wi-Fi via the settings menu

This is the most common method that works on all Xiaomi models, including the Redmi Smart. TV mi TV A2. The instructions are relevant for the firmware MIUI TV 3.0 and later.

Steps for connection:

1. Turn on the TV and press the Settings button on the remote.
2. Go to the Network and Internet section (or Network & Internet in English firmware).
3. Select Wi-Fi and the TV will start scanning the available networks.
4. In the list, find your network and click on it. If there's no network, click Update (round arrow).
5. Enter your password with your on-screen keyboard. Use a voice-op console (if supported) for convenience.
6. Confirm the connection. If the password is correct, a tick will appear and status is Connected.

On some models (e.g. Mi TV Q1 75) you may be asked to update your firmware after you connect. Don't refuse - this will improve the stability of Wi-Fi. However, if the Internet is slow, it is better to update later through Settings → About TV → System Update.

💡

If the on-screen keyboard is uncomfortable, connect your wireless keyboard to your TV via Bluetooth or use the Mi Remote app on your smartphone to control it.

If after entering the password there is an error "I failed to connect to the network", try the following actions:

• 🔄 Reboot the router (turn off for 30 seconds and turn back on).
• 🔒 Make sure your password is entered correctly (registration is important!).
• 📶 Change your Wi-Fi channel on your router (optimum: 1, 6 or 11 for 2.4 GHz).
• 🛡️ Shut down the defenses. WPA3 (If enabled, some Xiaomi models work better with WPA2-PSK.

3. Alternative ways to connect to Wi-Fi

If the standard method didn't work, try one of the alternatives, which is especially useful for older models or when the network isn't listed.

Method 1: Connection via WPS

WPS (Wi-Fi Protected Setup) allows you to connect to the network without entering a password.

1. On the TV, go to Settings → Network and Internet → Wi-Fi → WPS.
2. Click Connect via WPS.
3. For 2 minutes, press the WPS button on the router (usually signed or flashed).

If the router does not have a WPS button, check if this feature is enabled in its settings (wi-fi → WPS).

Method 2: Manual network addition

If your network is not listed (for example, it is hidden), add it manually:

1. In the Wi-Fi menu, select Add Network (or Add Network).
2. Enter the exact network name (SSID) – the register is important!
3. Select the security type (WPA2-PSK is recommended).
4. Enter the password and save it.

Method 3: Using Ethernet for initial setup

If Wi-Fi is persistently not connected, but you have the opportunity to temporarily connect the TV to the router with a cable:

1. Connect the TV and router with a patch cord (in the LAN connector on the back panel).
2. Update the TV firmware through Settings → About TV → System Update.
3. After the update, try connecting to Wi-Fi again.

4. Solving common errors when connecting Wi-Fi

Even after you set it up properly, you can have problems, and let's look at the most common mistakes and how to fix them.

If the TV connects to Wi-Fi, but the Internet does not work (pages do not load, applications give an error), the problem may be in the Internet. DNS-Try manually prescribing 8.8.8.8 (Google) or 1.1.1.1 (Cloudflare) in your network settings:

1. Go to Settings → Network and Internet → Wi-Fi.
2. Click on the connected network. → Additionally.
3. Select Settings IP → Static.
4. In the DNS field 1 enter 8.8.8, in DNS 2 - 8.8.4.4.

💡

If after changing the DNS, the Internet worked, the problem was blocked by the provider or incorrect settings of the router.

5. Optimizing Wi-Fi for a stable TV experience

Even if you connect, the speed can be slow and the video slows down. Here's how to improve the connection quality:

Router settings for Xiaomi TV:

• 📡 Wi-Fi Channel: Choose a fixed channel (1, 6 or 11 for 2.4 GHz) over Auto.
• 🔄 Channel width: set 20 MHz (reduces interference).
• 🛡️ Security mode: only use it WPA2-PSK (turn off WPA3 and WEP).
• 📶 Transmission power: set to 100% (some routers have Transmit Power option).

For models with 5GHz support (such as the Mi TV Q2 65), we recommend creating a separate network for a TV in this range, but only if the router is not far away. For streaming video in 4K, not only speed, but also ping stability is important - check it through the Speedtest app on the TV.

Xiaomi Android TVs (such as Mi TV A2 43) can conflict with routers that have IPv6 enabled. If there are persistent connection breaks, disable IPv6 in the router settings.

6.Reset network settings on Xiaomi TV

If none of these methods worked, the last step is to reset the network settings, which will delete all the stored networks and return the settings to factory settings.

How to reset your settings:

1. Go to Settings → System → Reset.
2. Select Network Reset (or Network Reset).
3. Confirm the action. The TV will reboot.

⚠️ Warning: Once reset, you'll have to re-enter passwords for all Wi-Fi networks, including hidden ones. IP, It will also need to be re-configured.

If the reset didn't help, maybe the problem is the hardware failure of the Wi-Fi module.

• Try connecting via Ethernet – if the internet works, the problem is Wi-Fi.
• Contact Xiaomi Service Center if the TV is guaranteed.
• For older models (such as Mi TV 3S), you can buy an external USB Wi-Fi adapter with support for Android TV.

7. Frequent Questions and Answers (FAQ)