Connecting a wireless remote to a Xiaomi TV via Bluetooth seems like a simple task, but in practice users often face problems: the device is not detected, the connection is interrupted or the remote is running with delays. In this article we will analyze not only the standard pairing procedure, but also the nuances for different models of TVs (from Mi). TV 4A before TV Q2), Also consider alternative ways to connect if Bluetooth refuses to work.
We’ll focus on diagnosing common bugs, from resetting your Bluetooth module to checking the remote’s compatibility with your TV firmware. If you’ve tried to connect the remote but have not succeeded, we recommend starting with the Typical Problems and Solutions section, which contains specific troubleshooting steps confirmed by experienced users and service centers.
Important: The instructions in this article are relevant for all modern Xiaomi TVs (including models with Google). TV and PatchWall), as well as for external Bluetooth remotes such as Xiaomi Mi Remote Controller or universal devices from third-party manufacturers.
Which remotes support Bluetooth connectivity?
Not all Xiaomi TV-compatible remotes are Bluetooth-enabled. Most standard IR remotes only connect through direct contact with the receiver on the TV, without pairing. To see if your remote supports Bluetooth, check:
- 🔍 Inscription on the case: Look for the Bluetooth logo (stylized letter "B") or mention of Bluetooth in the specifications.
- 📄 Documentation: The remote manual should have a section on pairing (usually with a mention of Pairing Mode).
- 🔋 Type of power: Bluetooth remotes are most often powered by a battery (rechargeable) or type of battery AAA, but with an energy-saving function.
Among the official accessories Xiaomi Bluetooth supports:
- 🎮 Xiaomi Mi Game Controller for games and controls)
- 📺 Xiaomi Mi TV Bluetooth Remote (Voice-controlled remote)
- ⚙️ Xiaomi Mi Remote Controller Pro (with Touch Bar)
Third-party remotes (such as those from Logitech or One For All) can also connect via Bluetooth, but require protocol compatibility checks. HID (Human Interface Device, which is used by Xiaomi TVs.
Preparing the TV for pairing
Before you connect the remote, make sure the TV is ready to pair.
- Turn on Bluetooth: Go to Settings → Devices → Bluetooth and activate the function. On some models, the path may be different: → Network and connectivity → Bluetooth.
- Update your firmware: outdated software can cause connection problems. Check the relevance of the version in Settings → On TV. → Updating the system.
- Make sure there is no interference: other Bluetooth devices (earphones, keyboards) may interfere with pairing.
If the menu doesn't have a Bluetooth partition, maybe your TV model doesn't support this feature. TV 4A (Those released before 2020 are often devoid of a Bluetooth module. To check this, check the specifications on the official Xiaomi website or use the command:
adb shell dumpsys bluetooth_managerIn the output, look for the line Supported: true. If it is not, Bluetooth is hardware missing.
Bluetooth enabled in the settings
The TV is updated to the latest firmware
There are no other active Bluetooth devices nearby.
The remote is charged (or it has batteries installed)
-->
Step-by-step instructions for connecting the remote
The pairing process may vary slightly depending on the TV model and the type of remote, but the general scheme is as follows:
- Activate the pairing mode on the remote: For Xiaomi Mi TV Bluetooth Remote: Press the Menu buttons + OK 5 seconds until the light starts flashing. For general-purpose remotes, the Power combination is usually used. + Mute or special Pair button.
Add the device to the TV
- Open Settings → Devices → Bluetooth.
- Click Add Device or Search.
- In the list of found devices, select the name of your remote (for example, Mi Remote or Mi Remote). BT Remote).
- Confirm the pairing on the TV and remote (if input is required) PIN-If you want to try 0000 or 1234).
Check the efficiency
Important: on TVs with Google TV (Like Mi. TV Q2 2023) after pairing, it may be necessary to assign the remote as the “primary input device” in the Settings section → Devices → Device management.
| Model TV set | The Way to Bluetooth Settings | Features of connection |
|---|---|---|
| Mi TV 4S/4X (2018–2020) | Settings → Network and connectivity → Bluetooth | Update to MIUI TV 3.0+ is required |
| Mi TV Q1/Q2 (2021–2023) | Settings → Devices → Bluetooth | Supports up to 5 connected devices |
| Mi TV A2/A3 (budgetary) | Bluetooth is missing | External Bluetooth adapter is required |
| Mi TV ES (2022) | Settings → Connections → Bluetooth | Automatic search of devices when enabled |
💡
If the TV does not find the remote, try rebooting the Bluetooth module: turn off and turn on the function again in the settings or remove the TV plug from the socket for 30 seconds.
Typical problems and their solutions
Even if you follow the instructions correctly, pairing may not work, and let's look at the most common errors and how to fix them:
1.The TV doesn't see the remote.
- 🔄 Reboot the remote: Remove the batteries for 10 seconds or reset it through the Reset button (if you have one).
- 📡 Check the distance: the remote should be no further than 1 meter from the TV during pairing.
- 🔧 Update the remote firmware: Some models (such as Xiaomi Mi Remote Pro) require an update through the Mi Home app.
2.The coupling is passing, but the remote is not working
- 🎯 Assign buttons manually: in Bluetooth settings, select the remote and press Set the buttons (if the option is available).
- 🔋 Check the charge: discharged batteries can cause delays or complete inoperability.
- 🔄 Reset Bluetooth settings on your TV: Settings → Devices → Bluetooth → Reset the settings.
3.The remote is connected but shuts down after a few minutes
- ⚡ Turn off the power saving mode: in the Bluetooth TV settings, find the Energy saving option and deactivate it.
- 📶 Reduce the number of connected devices: Xiaomi TVs can support a limited number of Bluetooth connections at once.
- 🔄 Update your TV firmware: connection errors are often fixed in new software versions.
⚠️ Note: if the remote was previously paired with another device (for example, a smartphone), it must first “forget” in the settings of that device, otherwise the TV will not be able to connect.
What if the TV says "I couldn't connect"?
Alternative ways to connect the remote
If Bluetooth is not available or not working on your TV, consider alternatives:
1. Connection through USB Bluetooth adapter
For TVs without built-in Bluetooth (e.g. Mi) TV 4A) You can use an external adapter. Any adapter that supports Bluetooth 4.0 will do.+ (For example, TP-Link UB400). Instructions:
- Connect the adapter to USB-television-port.
- Put the remote in pairing mode.
- In the settings of the TV, select Add Device – the adapter should be defined as Bluetooth Host.
2.Use of an IR remote with a Bluetooth transmitter
Some universal remotes (e.g. BroadLink) RM4 Pro) can emulate IR signals via Bluetooth:
- Connect the transmitter to the TV via Bluetooth.
- Set up the remote via the manufacturer’s app (e.g. BroadLink or eControl).
- Select the Xiaomi TV model in the app database.
3. Control via smartphone
If the remote is lost or broken, you can temporarily use the smartphone:
- 📱 Install Mi Remote (official from Xiaomi) or Google TV.
- 🔗 Connect your smartphone and TV to the same Wi-Fi network.
- 🎯 Select the TV model in the app and follow the instructions on the screen.
Note: Wi-Fi control is less stable than Bluetooth control and may depend on network speed.
💡
If your TV doesn’t support Bluetooth, an external adapter is the most reliable solution. USB-Adapters are inexpensive (from 300 rubles) and compatible with most models Xiaomi.
Configure the buttons of the remote after connecting
Once paired successfully, some remote buttons may not work properly (e.g., Netflix opens Prime Video) to reassign functions:
- Open Settings → Devices → Bluetooth.
- Select the connected remote and click Set up buttons (or Additional).
- Follow the instructions on the screen by pressing the remote buttons to link them to actions.
If there is no button setting option, try:
- 🔧 Use apps like Button Mapper (require root rights to your TV).
- 📋 Update the firmware remote via Mi Home (for official accessories Xiaomi).
- 🔄 Reset the remote to factory settings (usually by clamping Menu) + Back to 10 seconds).
For general-purpose remotes (like Logitech Harmony), customization is done through proprietary software on a PC or smartphone. The database of such remotes usually has profiles for Xiaomi TVs, but sometimes manual calibration is required.
⚠️ Note: button reassignment may reset after updating the TV firmware.We recommend that you capture the current settings with screenshots or recordings.
How to disable or remove the remote?
If the remote is no longer needed or you need to connect a new one, it should be removed from the list of associated devices:
- Go to Settings → Devices → Bluetooth.
- Find the remote in the list and select it.
- Press Forget the device or Disable it.
To reset all Bluetooth connections (e.g., before selling a TV):
- Open Settings → System → Reset.
- Select Reset Network Settings or Reset All Settings (the second option will remove all associated devices).
If the remote is not removed (for example, hangs in the list as “Connected”), try:
- 🔄 Reboot the TV.
- 🔧 Reset Bluetooth settings via Developer Mode (activated by pressing 7 times on the Software Version).
- 📵 Temporarily disable Bluetooth, remove the remote from range, then turn the module back on.