Connecting the Beeline console to the Xiaomi TV: all ways and solutions to problems

Connecting the console from Beeline TV to the Xiaomi TV is a task faced by thousands of users after buying a new Mi TV or Redmi Smart TV. Despite its apparent simplicity, the process can be complicated by incompatibility of connectors, lack of sound or authorization errors. In this article, we will discuss all the current ways of connecting (from the Internet). HDMI before RCA), adjust the sound and picture, and also solve typical problems - from the lack of a signal to the failures in the remote.

Feature of Xiaomi TVs - their firmware MIUI TV, It's sometimes in conflict with external devices, like the Android-based Beeline consoles. TV (model TV Box S1/S2) may incorrectly determine the resolution of the screen, and the old consoles with AV-We've taken all the nuances into account and prepared step-by-step instructions for each model, from the budget Redmi. TV A Series to the flagship Mi TV Q2 75".

If you've just purchased a set-top box or a TV, start with the Connection Preparation section, where we'll list all the hardware you need. Have you tried to connect before but encountered a problem? Go straight to Problem Sharing or Sound Customization, which has solutions for 90% of common bugs.

1. Preparation for connection: what will be needed

Before you connect the set-top box and the TV, check that you have all the cables and adapters you need. The minimum set depends on your console model and the year of Xiaomi's TV. TV (2022–2026) often deprived of AV-entrance (RCA), Therefore, for old consoles, an adapter will be required.

Here is a complete list of what might be useful:

• 🔌 Cable HDMI (version 1.4 or 2.0 — Any of the set-top boxes will do. TV Q1/Q2 recommended HDMI 2.1 support 4K@60Hz.
• 🔄 adapter HDMI→RCA (if only the prefix AV-The way out, but the TV doesn't. RCA-entrance).
• 🔊 Optical Toslink cable (to transmit sound to a soundbar or receiver if HDMI audio-free).
• ⚡ Power supply for the console (sometimes lost during the move).
• 📱 Television remote control (you will need to select the source of the signal).

Pay attention to the screen resolution of your Xiaomi TV. If the TV is supported 4K, Beeline gives you a maximum of Full. HD, In the settings of the consoles will have to manually set 1920×1080, Otherwise, the picture will be stretched or cut off.

⚠️ Attention: Beeline prefixes TV Box S1/S2 Dolby Vision does not support the HDR10+, which is in Mi. TV Q2. When connecting through HDMI These formats will automatically turn off - that's normal.

If you use the old Beeline console (before 2018), check the availability AV-The output (yellow, red, white connectors). TV (For example, Redmi Smart. TV X Series does not have RCA-Input, so you will need an adapter or transition to HDMI converter.

2. Connect the Beeline console to Xiaomi TV through HDMI

This is the most reliable and high-quality way, because HDMI It delivers both video and sound without loss, and is suitable for all Beeline consoles (except the oldest) and Xiaomi TVs (including Mi). TV 4S, 5X, Q1, Q2).

Step-by-step:

1. Turn off the TV and console from the socket (this will reset the cache) HDMI-port).
2. Connect. HDMI-cable to the console and TV, we recommend using the port HDMI 1 HDMI 2 (they usually support) ARC sound-wise).
3. Turn on the TV and click the Source (or Input) button on Xiaomi remote.
4. Select the source of the signal — HDMI 1 (or another port where the console was connected).
5. Include the Beeline console in the outlet and wait for the load (can take up to 2 minutes).

If there is no image after the connection, check:

• 🔄 The right signal source on the TV (sometimes Xiaomi) TV does not switch automatically).
• 🔌 Correction HDMI-Cable (try another cable or port).
• ⚙️ Settings for permission on the console: go to Settings → Display. → Screen resolution and select 1080p.

If Xiaomi TV does not see the console through HDMI, Try resetting your settings. HDMI-Port: Go to Settings → Devices → Reset HDMI (firmware MIUI TV 3.0 and newer).

3. Connection through RCA (AV, «tulips) - if not HDMI

This method is relevant for older Beeline consoles (released before 2018) or TVs without HDMI (For example, Xiaomi Mi TV 2 2015. The picture quality will be worse than the one in the picture. HDMI, But it's the only option for devices without digital ports.

What you need:

• 🔌 Cable RCA (3 plugs: yellow, red, white).
• 🔄 adapter RCA→HDMI (if you don't have a TV AV-entrance).

Instructions for TVs with AV-entrance:

1. Connect the yellow plug (video) to AV IN TV-wise.
2. Connect the red and white plugs (audio) to the corresponding connectors.
3. On the Xiaomi remote, click Source and select AV (composite).
4. Put the console in the socket.

If your Xiaomi TV no AV-Enter, use the converter RCA→HDMI (worth ~1000–1500 ₽). Connection:

1. Connect the console and converter with a cable RCA.
2. Connect the converter to the TV through HDMI.
3. Choose the source on the TV. HDMI, converter.
4. Turn on the power of the converter (some models require a separate power supply).

⚠️ Note: When using the converter, there may be a delay of sound (up to 0.5 seconds). This is due to signal processing. → Sound. → Synchronization of lips/sound).

4. Sound tuning: why it is not and how to fix

One of the most common problems when connecting the Beeline console to Xiaomi TV — No sound when you have a picture, and there are many reasons, from incorrect settings to hardware limitations.

Checklist for troubleshooting sound problems:

• 🔊 Check if the audio on the Xiaomi remote is turned off (Mute button).
• 🔄 Make sure the correct sound output is selected on the console: Settings → Sound. → Exit → HDMI (or AV, if the analog connection).
• 🛠️ Update the TV firmware: Settings → On TV. → Updating the system.
• 🔌 If you use HDMI, Try another cable (sometimes cheap cables don't transmit audio).

If there is a sound, but with a delay, follow the following steps:

1. On the Beeline set-top box, go to Settings → Sound. → Synchronization and setting the value +100 ms or +200 ms.
2. On Xiaomi TV, turn off sound processing: Settings → Sound. → Additionally. → Sound processing → Off.
3. If connected through RCA→HDMI Converter, check its settings (some models have a delay adjustment).

Special case: On Mi TVs TV Q2 So, you can have a conflict with the Dolby Atmos soundbar:

1. Go to Settings. → Sound. → Sound format.
2. Choose. PCM Auto or Dolby Digital instead of Auto or Dolby Digital.
3. Reboot the TV.

💡

If you have to connect the console through HDMI The sound is only going through the TV, not through the soundbar, check the settings. HDMI ARC Xiaomi menu TV. Sometimes you need to manually turn it on. ARC In Settings → Sound. → HDMI ARC.

5. Image setting: blurred picture, edge trimming, wrong resolution

After connecting the Beeline console to Xiaomi TV You may experience image problems, such as blurring, cutting edges, or incorrect proportions, due to resolution mismatch or zooming settings.

How to fix a blurred picture:

• 📺 On Xiaomi TV, turn off image processing: Settings → Picture → Additionally. → Noise suppression → Off.
• 🖥️ On the console, set the native resolution: Settings → Display. → Screen resolution → 1920×1080 (1080p).
• 🔄 If the picture is blurry, try another one. HDMI-cable (sometimes the fault is the 1.2 cable that doesn't pull Full) HD).

If the edges of the screen are trimmed:

1. On Xiaomi remote, press Menu → Picture → Screen format.
2. Select Just Scan (or 1:1 if the first option is not available).
3. If the problem remains, go to the Settings on the console → Display. → Screen size and set 100%.

For Mi TVs, TV Q1/Q2 supportive 4K This can be an artifact in the form of stripes or flickering, which is because Beeline doesn't support it. HDCP 2.2. Decision:

1. On the TV, go to Settings. → HDMI → Regime. HDMI.
2. For the port to which the console is connected, select Mode 1.4 (instead of 2.0 or 2.1).
3. Reboot the TV.

6. Authorization and configuration of Beeline TV: login errors and decisions

After physical connection, the console must log in to the Beeline TV service, where users often encounter errors such as "No Internet connection" or "Incorrect login / password", even if the data is entered correctly.

Step-by-step authorization:

1. Connect the console to the Internet via Wi-Fi or Ethernet cable.
2. On the welcome screen, select "Enter".
3. Enter the login and password from your Beeline account (the same as for your personal account on the site).
4. If a confirmation code is requested, check SMS on a phone tied to an account.

Common mistakes and their solutions:

• 🔴 "No Internet connection: Check if the Ethernet cable is connected or if the Wi-Fi is on. Restart the router. If you use Wi-Fi, check if the console supports 5 GHz (old models only work on 2.4 GHz).
• 🔴 "Incorrect login/password": Make sure you enter data from your Beeline account, not your email account. reset your password through beeline.com. If your account is linked to another number, contact support at 0611.
• 🔴 "Service temporarily unavailable": Check the status of the service on the Beeline website. Update the console firmware: Settings → About the prefix → Update software. Reset the settings of the consoles to the factory: Settings → Recovery and discharge → Resetting settings.

If the console hangs on the Beeline logo, follow the following steps:

1. Turn off the power supply for 1 minute.
2. Turn it back on and wait for the download (can take up to 5 minutes).
3. If it doesn’t help, reset your settings via the Reset button (usually located on the back).

💡

If the Beeline console is not connected to Wi-Fi, try manually specifying the network settings: go to Settings → Network → Add the network manually and enter SSID Sometimes the automatic connection is lost because of special characters in the password.

7.Management: how to configure the Xiaomi remote for the Beeline console

It's not easy to use two remotes, from the TV and the console. Fortunately, Xiaomi remotes (like the Mi console) TV 4S/5X/Q2) You can configure to control the Beeline prefix via the infrared port.

Instructions for setting:

1. Turn on the set-top box and the TV.
2. On the Xiaomi remote, press and hold the Menu buttons. + OK simultaneously for 5 seconds.
3. The remote settings menu will appear on the screen. Select "Add device".
4. In the list of manufacturers, find "Beeline" or "Android" TV Box".
5. Follow the instructions on the screen by pressing the buttons on the remote to check the work.

If there is no Beeline in the list, try the following manually entered codes:

• 📺 For Beeline. TV Box S1: 1245 or 3344.
• 📺 For Beeline. TV Box S2: 5566 or 7788.
• 📺 For older consoles: 0033 or 0123.

If the Xiaomi remote does not want to control the console, check:

• 🔦 Does the IR port work on the console (is it not closed with a decorative panel).
• 🔋 Are the batteries in the remote discharged (even if the indicator is on, the power may not be enough for the IR signal).
• 📶 Are there any interference from other IR devices (e.g. air conditioning).

Alternatively, use the console via Bluetooth:

1. On the console, go to Settings → Devices → Bluetooth.
2. Turn on device search.
3. On the Xiaomi remote, activate Bluetooth mode (if supported).
4. Match the devices.

8. Frequent problems and their solutions

Even after a successful connection, there can be various failures. TOP-5 problems and ways of eliminating them.

If the console does not turn on at all, follow the following steps:

1. Check the power supply (try another socket).
2. Make sure the indicator on the console is on (if not, the power supply malfunction).
3. Press and hold the Power button on the console for 10 seconds (reset).

If after updating the firmware console stopped working, try to roll back to the previous version:

1. Download the firmware from the official Beeline website (support section).
2. Write it down on a flash drive in format. FAT32.
3. Connect the flash drive to the console and go to Settings → Update → Local Update.

💡

If the Beeline console brakes when viewing channels in high resolution, try turning off Hardware acceleration in the settings of the console (Settings) → For developers → Hardware acceleration. This will reduce the processor load.

FAQ: Answers to Frequent Questions