How to set up a wired Internet connection on a Xiaomi projector: full instructions from A to Z

Xiaomi projectors are not just movie viewers, but full-fledged multimedia centers that can replace a TV. However, a reliable Internet connection is required for streaming services, online games or video calls to work smoothly. Wi-Fi wireless does not always provide sufficient speed and stability, especially in the conditions of interference or at long distances from the router.

In this article, we will discuss how to set up wired Internet correctly on Xiaomi Mi Laser Projector, Xiaomi Mi Smart Projector 2/2 Pro and other models. You will learn what hardware you need, how to avoid typical connection errors, and what to do if the network is not working, and how to check the connection speed and optimize it for various tasks, from watching 4K video to online conferences.

What equipment is needed for wired connection

Before you start setting up, make sure you have everything you need. Most Xiaomi projectors support wired connection via the RJ-45 (Ethernet) port, but there are nuances depending on the model and firmware version.

Here is the minimum set of equipment:

• 🔌 Cat Cat Cat Ethernet Cable 5e Cat 6 is recommended for speeds up to 1 Gbps, the length of the cable depends on the distance between the projector and the router, but should not exceed 100 meters.
• 📡 Router (router) with free port LAN. Make sure the router is on DHCP-server (usually enabled by default).
• ⚡ Power adapter for the projector (if you plan to use for a long time, as a wired connection can drain the battery faster).
• 🔧 Crunching tool and connectors RJ-45 (If the cable needs to be cut by itself).

Some models (such as the Xiaomi Mi Smart Projector Youth Edition) may require a USB-Ethernet adapter if the device does not have an integrated port. In this case, choose an adapter on the AX88179 chip or RTL8153 - they are best compatible with Android TV, which runs Xiaomi projectors.

Step-by-step: how to connect the Xiaomi projector to the Internet via cable

The connection process can be divided into three steps: physical connection, network setup in the projector menu, and connection check. Follow the instructions carefully to avoid errors.

Step 1: Physically Connecting the Cable

1. Turn off the projector and router (optional, but recommended to reset potential conflicts).
2. Connect one end of the Ethernet cable to the LAN port on the router.
3. Put the other end of the cable in the Ethernet port on the projector. If you don't have a port, use it. USB-adapter (see section above).
4. Turn on the router, wait for its full load (usually takes 1-2 minutes).
5. Turn on the projector and wait for the system to boot.

Step 2: Set up the network in the projector menu

1. On the projector’s remote, press the Settings button (or Settings).
2. Go to the Internet and Network (Network & Internet) section.
3. Select Ethernet (or Wired Network).
4. If the connection is not established automatically, click Set up manually and enter the settings: IP-address: usually 192.168.1.X (where X is a number 2 to 254 not occupied by other devices. Gateway: your router's address (e.g. 192.168.1.1). DNS: You can leave it automatic or specify 8.8.8.8 (Google) DNS) or 1.1.1.1).

Save the settings and restart the projector.

Step 3. Check the connection

After setting up, check if the internet is working:

1. Open any browser (such as Mi Browser or Google Chrome) and try to load a site (such as speedtest.net).
2. Launch the YouTube or Netflix app – if the video is loading without delay, the connection works.
3. Check the speed through the built-in Speedtest app or web version.