Xiaomi Redmi Note 7, despite its age, remains a popular device due to its reliable hardware and high-quality screen. However, users often face difficulties in initially configuring access to the WAN, especially if the device is purchased with or after a reset. The correct configuration of access points and network parameters is critical for the stable operation of instant messengers and browsers.
In this article, we will discuss in detail all the stages of connection, from the insertion SIM-You can manually enter your operator's specific parameters, learn how to switch between modes of operation and what to do if the automatic setting does not work, and deep tuning will allow you to avoid unnecessary traffic costs and ensure maximum connection speed.
Sometimes the problem is not the software settings, but the physical contact or the state of the SIM card itself. Before you go into the menu, make sure that the card chip is intact and sits tightly in the tray. The contact group must be clean, without oxidation, otherwise the phone will not see the network.
Preparation of SIM-card and tray
The first step is to properly install the communication module. The Redmi Note 7 uses a hybrid tray, which means that two devices can be installed. SIM-card SIM And microSD cards. It's important to understand that for the job. 4G In some regions, slots may have limitations, so experiment with their location.
Take a paper clip from the delivery kit and tap into the hole on the bottom end of the case. Carefully remove the tray and place the placement SIM-And you can see the angle of the plastic that's bent, and it tells you the right orientation, and you don't need any force.
- 📱 Make sure that SIM-The card is Nano-SIM, larger ones will have to be cut or changed by the operator.
- 🔌 Check the integrity of the golden contacts on the chip, wipe them with a soft dry cloth if necessary.
- 📂 If you use a memory card, insert it into the second slot, taking care not to damage the contacts.
⚠️ Warning: Never try to put the tray back in without SIM-cards or memory cards, if the design does not provide for empty placement, as this may lead to breakage of the mechanism or dust entering the body.
After you install the tray, press the power button. If the system boots successfully, the status bar should display signal level icons. The absence of icons or the words "No network" indicate a problem with determining the map, which must be solved before setting up the Internet.
Basic setup of mobile Internet
Once the device is turned on, MIUI usually automatically detects the operator and applies standard settings. However, in the case of the Xiaomi Redmi Note 7, especially on global firmware, this mechanism can fail. You will need to manually activate the data transfer.
Lower the swipe notification curtain from top to bottom. Find the two-arrow icon (mobile Internet) and activate it. If the icon is on but the pages aren't loading, go to the deep settings menu. Go to Settings. → SIM-maps and mobile networks.
You have to choose the SIM card you want to access the network through if you have two. In the menu that opens, look for "APNs," which is where you store the key parameters for connecting to the operator's gateway.
📊 What Operator is Used on the Redmi Note 7?
MTS
Beeline
Megaphone
Tele2
Other
Often times, the list of access points is empty or contains incorrect data, in which case you need to create a new profile. Press the "Add" button or the plus in the corner of the screen. Enter a name, for example, "Internet", and fill in the APN fields according to your operator's data.
- 🌐 Name (Name) - any designation convenient for you, for example, MTS Internet.
- 🔤 APN — The most important parameter, usually the domain name of the operator (for example, Internet.mts.ru).
- 🔑 Login and password – often left blank, but some tariffs require (e.g., “mts” and “mts").
After you have entered all the data, be sure to save the profile by clicking the menu in the upper right corner or the "More" button. Then select the profile you created to activate it (the green tick will appear).
Manual creation of an APN access point
If automated search doesn't work, you'll have to do it manually. The settings for different operators may vary, and even a single character error will result in no connection. Below is a table of current data for the main operators that will help set up the mobile gateway.
| Operator. | Name (Name) | Access Point (APN) | Login. | Password. |
|---|
| MTS | MTS Internet | internet.mts.ru | mts | mts |
| Beeline | Beeline Internet | internet.beeline.ru | beeline | beeline |
| Megaphone | Megafon | internet | (empty) | (empty) |
| Tele2 | Tele2 Internet | internet.tele2.ru | (empty) | (empty) |
When creating a new access point in Redmi Note 7 Do not change other parameters, such as the protocol type or MCC/MNC, If you're not sure what they mean, leave them by default or automatically. APN It is usually referred to as default,supl, which provides the normal Internet and GPS-navigation.
What if the internet doesn’t work after setting up an APN?
If the Internet doesn't show up after you type in the right data, try switching the network mode. SIM-Select "Preferred network type." Set a value "4G (LTE) Sometimes the phone gets stuck on the EDGE (2G), where modern sites may not load due to incompatibility of encryption protocols, and it also helps to briefly turn on flight mode for 10 seconds to re-register on the network."> For example, unlimited social media packages may require a separate hotspot. Check this information in your personal account or on your provider's website. Set up Wi-Fi connections In addition to mobile traffic, the Xiaomi Redmi Note 7 works perfectly with wireless Wi-Fi networks. To connect, click on the Wi-Fi icon in the curtain or go to Settings → Wi-Fi. The device will immediately start searching for available networks in range. Select the network you want from the list. If it's password protected, you'll see a field for entering the security key. Be careful when you type: the system distinguishes between the register of letters". 🔒 For hidden networks, select "Add Network" and enter SSID (hand-name. ⚙️ In advanced settings, you can set static IP-address if the router requires a fixed address for the device. 📶 Use the Wi-Fi Assistant feature to automatically switch to mobile internet if the Wi-Fi signal becomes weak. WPS They can connect Redmi Note 7 without entering a password. WPS on the router, then in the Wi-Fi menu on the phone, select "Connect via" WPS". The device itself exchanges encryption keys. It's worth noting that the Wi-Fi menu has a feature called "Wi-Fi Assistant," which analyzes the connection speed and can suggest switching to a mobile network if the wireless signal is unstable. This is useful in areas with poor coverage, but watch for traffic consumption. Modem mode and Internet distribution Your smartphone can act not only as a client, but also as a distributor of the Internet. The "Access Point" function turns the Redmi Note 7 into a full-fledged Wi-Fi router. This is true when you need to connect a laptop or tablet to the network via a mobile Internet phone. To activate, go to Settings → Access Point Your smartphone can actuate as a network without a number and you can use your password. ⚠️ Note: Distribution of the Internet through 4G It consumes a lot of battery power and can heat up the smartphone body. Don't leave the access point on unattended for a long time, especially in hot weather. In addition to Wi-Fi, Xiaomi has a handout via the phone. USB-cable. USB-The modem often gives a more stable connection and charges the phone at the same time, which is convenient when working at a computer. Bluetooth modem runs slower, but consumes less power. ☑️ Check the balance of the mobile account: Make sure there is a traffic pack: Charge the phone to a minimum 50%:Create a complex password for Wi-Fi: 0 / 1 In the AP settings, you can limit the number of devices you can connect to, and this will protect you from unauthorized access, even if someone knows the password. The system will notify you every time a new device tries to connect to your network. Diagnostics and resets of network settings There are situations when all the settings are correct, but the Internet is not working, in which case the reset of network settings helps. This procedure will not delete your personal data, photos or contacts, but will clear all saved Wi-Fi passwords and Bluetooth settings. → Connection and sharing → Reset Wi-Fi, mobile networks and Bluetooth. Confirm and wait for the reboot of the communication modules. After that, the phone will be as new as network settings. If that didn't work, check if Traffic Savings is on. It can block background applications. Also make sure that on SIM-The card has not expired or the money has not expired. 💡Complete Network Reset Removes 90% of Software Connection Errors Related to Old Profile Conflict APN Or a communication module malfunction, and in rare cases, it can be a hardware problem, and if the phone can't see any network, or Wi-Fi, or mobile, it could be a damaged antenna module or a plume, and you can't do without a service center. 4G, But the problem is often the wrong network mode. SIM-Card selected "Preferred" 4G". Also check if your SIM card supports the standard. LTE (USIM). Older cards may need to be replaced by the operator. APN Is it currently in use? Go to Settings → SIM-maps and mobile networks → Choose. SIM → Access points (APN). The active profile will be marked with a green tick or highlighted by color. These are the parameters your phone is using to get online now. Can a virus block the Internet on Xiaomi? Yes, malware can change proxy or DNS settings, redirecting traffic. If you notice strange network behavior, check the device with antivirus and reset the network settings to factory. Also check the "Certificates" section in the security settings. What to do if the 4G/LTE icon disappears after the update? After the MIUI firmware update, regional settings are often reset. Try changing the region in the phone settings (for example, India or Singapore) and sometimes reboot this option to the 4G networks.