How to extract SIM-Map from Xiaomi: The Complete Guide

Changing a carrier or switching to a tariff with a large volume of Internet often requires replacement SIM-In smartphones Xiaomi, Redmi and POCO This process is usually intuitive, but can cause difficulties for new users or owners of models with a non-standard tray location. Incorrect retrieval actions can damage the mechanism or the card itself, so it is important to know the exact action algorithm for your device model.

In this article, we will discuss in detail how to securely get a Sim from Xiaomi of different series, what tools will be required for this and what to do in emergency situations when the tray is jammed. We will also look at the differences between combined and separate slots so that you do not confuse contacts when installing a new card.

Tool preparation and tray type determination

Before you start removing, you need to make sure you have a suitable tool on hand. Each Xiaomi smartphone comes with a special metal clip designed to open the tray. If the original paper clip is lost, you can use a regular stationery clip by straightening one of its ends, or a thin needle. Use of too thick objects such as a stitch or knife is strictly prohibited, as this can damage the latch mechanism inside the case.

It is important to determine the type of tray in your model. Most modern Xiaomi smartphones are equipped with a combined slot, where one cell is designed for SIM, and the second can be used either for a second SIM card or for a microSD memory card. In older or budget models, there may be separate slots located on different sides of the case or one under the other. Understanding the design will help avoid errors when extracting.

While current standards allow hot replacements, software failures sometimes cause the system to fail to see a new card or to display the network incorrectly. The power outage ensures that the electrical pulse does not damage the chip contacts at the time of physical extraction.

⚠️ Warning: Never try to open the tray while the device is on and actively transmitting data unless urgently needed.Abruptly shutting down the card at the time of writing may damage the file system SIM.

Find a clip hole. It's usually located on the bottom end of the smartphone, next to the USB connector, or on the top end in older models. The hole is round or oval in shape and is directly on the movable part of the tray. Carefully insert the tool perpendicular to the case until the characteristic click.

Step-by-step: standard extraction

The process of removing a SIM card from a Redmi or POCO is almost identical to all models with a mechanical tray. Once you insert the paper clip into the hole and feel the resistance of the spring, you need to apply a little more effort. The tray must leave the case a few millimeters, after which it can be gently tucked with the nail and completely removed.

• 📱 Take the smartphone in your hand so that the screen looks down, and the jack for the paper clip was directed to you.
• 🔩 Insert the tip of the paper clip into the hole strictly perpendicular, without distortion, and press until the click.
• 💾 Carefully pull the tray with your fingers, holding the phone itself, so as not to drop it.
• 🔄 Extract. SIM-map, remembering the position of the cut (key) to insert the new.

Notice the shape of the notch in the tray. Combined slots often have a special frame or marking indicating which cell is responsible for what. For example, in some Xiaomi Mi series models, the first cell is always designed for the main SIM, and the second is a hybrid. Confusion can lead to the phone not seeing the network or memory card.

If the tray is tight, don't pull it sharply. The mechanism may be blocked by dust or oxidation. Try to move the paperclip slightly from side to side without removing it to stir the mechanism. After extracting, wipe the tray contacts with dry lilaless cloth.

Features of extraction in different models Xiaomi

Different smartphone lines have their own design features. In the Xiaomi Mi 11 series and later, the tray often features an additional IP68 rubber seal to protect against moisture. This makes the extraction slightly more tight, requiring a confident but neat press. In the budget Redmi Note series, the mechanism is simpler, but the plastic tray can be more fragile.

In foldable smartphones such as the Xiaomi Mix Fold, the tray can be placed on the side edge rather than on the ends, so as not to disturb the balance of the device when folded. It is also worth considering that some regional versions (Chinese) may not support certain frequencies, but the physical extraction mechanism remains standard.

Owners of devices with two physical SIM-In some rare models with triple slot (two SIMS) + memory card in one tray) the design may differ, requiring the removal of the entire module.

What to do if the tray is stuck or not taken out

It is not common, but possible, for Xiaomi trays to not be removed even after a paper clip is pressed. The main cause (often is) is factory defects, dust getting into the mechanism, or the body deformation after a fall. If you feel that the mechanism is locked, do not use excessive force, it will lead to the breakage of the plastic guides.

Try this algorithm: tap your hand slightly on the bottom end of the phone, holding it down with the screen. Vibration can help move the stuck part. You can also try to heat the body in the tray with a hairdryer at a minimum temperature for 10-15 seconds - the plastic will expand slightly, and the mechanism can be released.

⚠️ Warning: If the tray fails after a few careful attempts, do not pick the hole with a knife or pin.You risk damaging the antenna contacts located nearby, which will lead to loss of signal.

If the tray is removed, but stuck itself SIM-If the card is stuck and not coming out, use a thin tweezer. Carefully grab the edge of the card and pull on yourself. If the card is jammed dead, you should contact a service center where specialists will disassemble the phone and remove the card without risking damage to the motherboard.

Problems with eSIM and software extraction

Modern flagships of Xiaomi increasingly support eSIM technology (embedded SIM card). In this case, physical extraction is impossible, since the chip is soldered on the board. QR-code.

To manage eSIM profiles, go to the Settings menu → SIM-You can add a new profile, switch between them, or delete an old one. If you need to deactivate the eSIM completely, select the appropriate profile and click "Delete." This action is irreversible without re-activating from the operator.

• 📲 Open the settings and select the item «SIM-maps and mobile networks».
• 🔍 Find the Add Plan section or eSIM management.
• 🗑️ To delete, select a profile and click “Delete tariff plan».
• ✅ Confirm the action with a password or biometrics.

It's important to distinguish between a physical card and a virtual card, and if you have a tray on your phone but you use an eSIM, you don't have to extract anything, and communication problems are solved by rebooting your profile or resetting your network settings, not by mechanical intervention.

💡

Tip: Before deleting the eSIM profile, be sure to save QR-Reissue of the code may take time and require a visit to the communication salon.

Slot care and problem prevention

To make the extraction mechanism last long, you need to monitor the cleanliness of the tray. Dust and pile, accumulated inside the case, can be compressed and difficult to run. Every six months, it is recommended to remove the tray and blow the hole with compressed air or clean carefully with a dry soft brush.

If you change your SIM cards frequently, check the status of the contacts on the tray. Oxidation can lead to unstable network operation. Rub the contacts with an alcohol wipe or a wipe (very carefully) to remove plaque. Also check whether the card sits evenly in the frame - if it is skewed, this creates unnecessary pressure on the mechanism when closed.

When installing a new card, make sure it matches the Nano-SIM format. Using adapters or hand-carved cards often results in a jamming tray. The edges of such a card can be uneven and cling to the walls of the case when entering.

💡

Main conclusion: Regular cleaning of the tray and use of the correct sized cards (Nano-SIM) will prevent 90% of jamming problems in the future.

Frequently Asked Questions (FAQ)