How to distribute the Internet from the phone Xiaomi Redmi 8: all ways and solutions to problems

The Xiaomi Redmi 8 is still a popular budget smartphone that does a great job as a mobile router, but many users have difficulty trying to distribute the Internet to a laptop, tablet or other phone. In this article, we’ll break down all the ways you can distribute the internet with Redmi 8, including hidden settings. MIUI, Optimization of speed and solution of typical errors.

It is important to understand that the functionality of the Internet distribution depends not only on the phone model, but also on the firmware version. MIUI, We tested all methods on current versions of software (including regional restrictions). MIUI 14), so the instructions will work in 2026, and if you use custom firmware, some menu items may be different.

Before you start setting up, make sure that your carrier tariff allows data transfer (some tariffs block the distribution of the Internet). Also check the balance - when connecting devices, traffic consumption can increase significantly.

Preparing the phone for the distribution of the Internet

Before turning on the access point, several mandatory steps must be taken, which will help avoid connection problems and ensure stable operation.

First, update your firmware to the latest version. → The phone. → System updates. Up-to-date versions MIUI contain corrections for errors related to the Wi-Fi and Bluetooth module.

Second, check the mobile network settings:

• 📶 Open the Settings. → SIM-maps and mobile networks
• 🔄 Choose yours. SIM-card and make sure that the option "Data transfer" is enabled"
• 🌐 In the "Network Type" section, install 4G (preferably 3G, if 4G idle
• ⚡ Enable the "Enhanced" option LTE" (If there is, it will increase the speed of distribution.

⚠️ Note: If you use two of these SIM-The Internet distribution will only work through the SIM, The one that's chosen as the primary for the data transfer. SIM-maps and mobile networks → Transfer of data.

We also recommend disabling all background apps that may consume traffic.

1. Go to Settings → Applications → Application Management
2. Sort applications by traffic consumption
3. Limit background activity for messengers and social networks

💡

If you plan to distribute the Internet to multiple devices, charge your phone to at least 50%.Sharing over Wi-Fi significantly increases battery consumption, especially if 3 are connected.+ device.

Method 1: Distribution of the Internet via Wi-Fi (modem mode)

This is the most popular and convenient way to connect up to 8 devices at a time, and the data rate will be the highest of all options.

Instructions for setting:

1. Open the Settings. → Access Point and modem
2. Select the "Mobile Access Point" option
3. Activate the Wi-Fi Access Point slider
4. Click on “Setting up the access point” to change the network name (SSID) password

Recommended parameters for stable operation:

• 🔒 Security: Install WPA2-PSK (It is the best balance between protection and compatibility)
• 📶 Range: Select 2.4 GHz for better compatibility with older devices or 5 GHz for top speed (if supported)
• 🔄 Auto-Disable: Disable this option if you want the access point to work continuously

On Redmi 8, when distributed via Wi-Fi, the maximum speed is limited to 150 Mbps due to the hardware features of the Wi-Fi module (standard). 802.11n). For comparison, the Redmi Note 10 supports 802.11ac and can distribute at speeds up to 433 Mbps.

If the devices are not connected to the access point:

Make sure the access point is turned on (the indicator in the notification bar)

Check the correctness of the entered password

Reboot both devices (phone and client)

Try changing the Wi-Fi channel in the access point settings-->

Method 2: Distributing the Internet via Bluetooth

This method is less popular, but it has its advantages: less battery consumption and more stable connection over short distances. 3-5 Mbit/s.

Step-by-step:

1. Turn on Bluetooth on both devices
2. On Redmi 8, go to Settings → Connection devices → Bluetooth
3. Find the right device in the list and perform pairing
4. After connecting, return to Settings → Access Point and modem
5. Activate the option "Bluetooth-modem"

On a client device (for example, a laptop) you must:

• 🖥️ In Windows: Options → Devices → Bluetooth and other devices → Connected devices → Your Redmi 8. → Connect through → Access point
• 📱 On Android: Enable data transfer via Bluetooth in mobile network settings

⚠️ Note: Some laptops require additional drivers to work with a Bluetooth modem. If the connection fails, check the laptop manufacturer's website.

Benefits of Bluetooth Distribution:

• ⚡ Lower battery consumption compared to Wi-Fi
• 🔒 More secure connection (less risk of unauthorized access)
• 🎧 Ability to use Bluetooth headphones at the same time

Disadvantages:

• 🐢 Low data transfer speed
• 📏 Limited distance (usually up to 10 meters)
• 🔄 Not all devices support this mode.

Method 3: Distributing the Internet through USB (regime USB-modem)

It's the most stable way in terms of speed and reliability, but it requires a physical connection via cable. USB-port and network adapter.

To set up:

1. Connect Redmi 8 to your computer or laptop USB-cable (preferably original)
2. On the phone, select the connection mode File transfer (MTP) Or just charging (this is temporary, then change automatically)
3. Go to Settings. → Access Point and modem
4. Activate the option "USB-modem"

A Windows computer may need to install drivers, and it usually automatically downloads them through Windows Update, but if it doesn't, it's:

• 🖥️ Open Device Manager (Win)+X → Device Manager)
• 🔍 Find a new device marked Remote in the list of "Network adapters" NDIS
• 🔄 Right-click and select "Update driver"

Advantages USB-modem:

• ⚡ Maximum speed among all methods (up to 100 Mbps on Redmi 8)
• 🔋 Minimum battery consumption (the phone is charged at the same time)
• 🛡️ The most secure method (no risk of interception by air)

⚠️ Attention: When in use USB-modem on Redmi 8 You may be heating the phone in the area. USB-It's okay, but if the temperature gets too high, turn off the modem. 10-15 minute.

If USB-The modem is not working:

Optimization of Internet speed

Even if you set up the hotspot correctly, the speed may be lower than expected, and here are a few ways to increase it:

1. Change of Wi-Fi channel:

• 📡 Go to Settings. → Access Point and modem → Setting up the access point → Canal
• 🔢 Try channels 1, 6 or 11 – they are least affected by interference
• 📊 Use the Wi-Fi Analyzer app to analyze channel load

2. Disabling traffic saving:

• 📉 Go to Settings. → SIM-maps and mobile networks → Transfer of data → Saving traffic
• 🔄 Turn off this option for the current one. SIM-map

3.Tune in. MTU:

Sometimes the standard value MTU (Maximum Transmission Unit may be suboptimal:

adb shell settings put global tether_dun_required 0


adb shell ifconfig rndis0 mtu 1420

These teams require the rights of the developer and ADB. Be careful when using them.

4. Use of applications for acceleration:

Applications like the Internet Speed Master or Network Signal Speed Booster can help optimize connectivity, but their effectiveness is often exaggerated — you better try the hardware methods first.

💡

The most effective way to increase the speed of distribution is to use USB-It minimizes data loss during transmission and provides the most stable connection.

Solving Typical Problems with Internet Distribution

Even if you set it up properly, you can have all sorts of errors, and let's look at the most common ones and how to fix them.

1. The access point is switched on, but the devices are not connected:

• 🔄 Restart your phone and client device
• 🔒 Make sure the password is entered correctly (the registry is important!)
• 📡 Check if the client device is enabled mode "On the plane"
• 🔧 Reset network settings on your phone: Settings → System system → Reset → Resetting Wi-Fi, Mobile Network and Bluetooth

2. connection is available, but the Internet is not working:

• 📶 Check the balance and activity of the tariff with the operator
• 🔄 Switch the network type from 4G on 3G back and forth
• 🔧 Change the access point settings APN standard for your operator
• 🛡️ Turn it off. VPN or proxy on the client device

3. The access point is permanently disconnected:

• 🔋 Check battery power – at levels below 15%, the phone can turn off the access point
• 🔄 Disable Battery Optimization for the Settings app"
• 📡 Set up static. IP-address

Low speed of distribution:

• 📶 Check the signal level of the network - with a weak signal, the speed drops
• 🔄 Change the Wi-Fi channel in the access point settings
• 📵 Disable all background apps that consume traffic
• 🔧 Try another way of giving (for example, USB instead of Wi-Fi)

If none of these methods worked, it may be the operator's problem, so please contact support and check if the Internet distribution is blocked on your tariff.

Hidden Internet Distribution Features on Redmi 8

In the firmware MIUI There are a few hidden features that can be useful when you distribute the Internet, and they're not always found in standard settings.

1. Change of the maximum number of connected devices:

By default, Redmi 8 allows you to connect up to 8 devices, but this value can be increased to 10.

adb shell settings put global tether_entitle_device_num 10

Developer rights and connection are required ADB.

2. disabling authentication:

If you need to give away the Internet without a password (for example, for public access), you can disable authentication:

adb shell settings put global tether_no_auth_required 1

⚠️ Warning: This will make your access point vulnerable to unauthorized connection. Use this method only on trusted networks.

Change in the time of automatic disconnection:

By default, the access point is turned off after 5 minutes without activity.

adb shell settings put global tether_offload_disconnect_delay 300

Here 300 is time in seconds (5 minutes). Set 0 to turn off automatic shutdown.

Prioritizing traffic:

With help. ADB You can prioritize traffic to the access point:

adb shell settings put global tether_dun_required 0


adb shell iptables -t mangle -A POSTROUTING -j TTL --ttl-set 65

This can help increase speed in some cases.

⚠️ Attention: All teams ADB If you do this, you can use it at your own risk, and if you don't use it, you can crash your phone.

FAQ: Frequently Asked Questions