How to duplicate the iPhone screen on the TV Xiaomi Mi TV: work-in

Transfer of the screen from iPhone to TV Xiaomi Mi TV — The task that users face when watching videos, making presentations, or playing games on the big screen. While Apple and Xiaomi use different ecosystems, there are universal protocols and adapters that allow you to organize wireless or wired duplication without loss of quality. Some methods require additional hardware, others are limited to iOS or TV models.

In this article, we will discuss 5 proven ways to duplicate the screen, including native AirPlay features, alternative protocols like Miracast, and wired solutions through the use of the Internet. HDMI-Adapters: We will pay special attention to typical errors (for example, audio delay during wireless transmission via Miracast on Mi). TV 4S or lack of AirPlay 2 support on older Xiaomi models and ways to eliminate them. If you are looking for a solution for a particular TV model or iPhone version, use the compatibility table at the end of the article.

1.Duplicate via AirPlay (for Mi) TV Apple-supported TV)

The easiest way to transfer the screen from the iPhone to Xiaomi Mi TV — Use the AirPlay protocol if your TV supports Apple's built-in feature TV (available on the Mi models TV 5 Pro, Mi TV Q2 This method ensures minimal delay and maintains quality. 4K HDR, It requires both devices to be connected to the same Wi-Fi 5 GHz network.

To activate duplication:

• 📱 On iPhone, swipe down from the top right corner to open Control Point.
• 🔄 Click on the screen duplication button (the icon with two rectangles).
• 📺 In the list of available devices, select your Xiaomi Mi TV (The name must be the same as the TV model).
• 🔒 When you first connect, you may need to enter a code that will appear on the TV screen.

⚠️ Note: On Xiaomi TVs older than 2020, AirPlay may not work as well due to an outdated firmware version. Update your TV software via Settings → On TV. → Updating the system.

If you don't. TV It does not support AirPlay directly, you can use Apple TV 4K You can connect the set-top box to the TV through HDMI, And then select it from the iPhone's backup list, which is a method that ensures you're running smoothly, but it's cost-effective.

2. Wireless transmission via Miracast (for all Mi models) TV)

Miracast is a universal wireless screen protocol supported by most Xiaomi TVs, including budget models like Mi. TV 4A or Mi TV 4S. Unlike AirPlay, it is not tied to Apple’s ecosystem, but can deliver up to 100-200ms latency, which is critical for gaming or watching dynamic video.

To connect via Miracast:

1. On Xiaomi TV, open Settings → Connection and Sharing → Wireless display (Miracast).
2. Activate the connection waiting mode.
3. On your iPhone, install the Miracast client app (like Screen Mirroring or ApowerMirror from the App Store).
4. Launch the app and select your TV from the list of available devices.

⚠️ Note: When using Miracast on iPhone with iOS 16+ You may have a problem with the black screen display. Solution: Turn off the Low Power Feed in your phone settings and restart the transmission.

To improve the stability of the connection:

• 📶 Use a router with Wi-Fi 6 support (e.g. Xiaomi) AX6000).
• 🔌 Connect your TV to the network via an Ethernet cable if possible.
• 📱 Close background apps on iPhone that consume Internet traffic.

Update the TV firmware to the latest version|

Make sure that the iPhone and Mi TV Connected to a single Wi-Fi network|

Disable VPN on your smartphone |

Close resource-intensive applications (games, streaming)-->

3. Wired connection via Lightning → HDMI adapter

If wireless methods are failing or you need minimal response time (for example, for gaming), the best option is wired connection via Lightning. → HDMI This method works on all iPhone models (starting with the iPhone 5) and does not depend on the firmware version of the TV:

• 🔌 Apple Lightning Digital Official AV Adapter (supports) 1080p and 4K new-model).
• 🔌 Third-party adapters (such as Anker or Baseus) but they may not support DRM-Secure Content (Netflix, Apple) TV+).

Instructions for connection:

1. Connect the adapter to the iPhone via the Lightning port.
2. Connect the adapter to the TV with an HDMI cable (use the HDMI 2.0 port for 4K).
3. On the TV, select the appropriate HDMI-signal-input.
4. The iPhone screen is automatically duplicated on the Mi. TV.

Advantages of the wired method:

• 🎮 Delay. <20 MS (ideal for games).
• 📺 Support for maximum TV resolution (up to and including: 4K@60Hz).
• 🔋 No dependency on the quality of Wi-Fi.

⚠️ Warning: When using non-original adapters, there may be no sound. Solution: connect the headphones to the iPhone via Bluetooth or use a separate audio output on the TV.

💡

If the image on the TV is cropped at the edges, check the zoom settings in the Settings menu → Screen. → Image Mode and select Just Scan or 1:1.

4. Use of Smart-Site-Sets (Apple) TV, Fire Stick, Xiaomi TV Box)

If you have a Xiaomi Mi TV It doesn't support AirPlay or Miracast, and the alternative is to connect an external console that acts as an intermediary:

• 🍎 Apple TV 4K (Full support for AirPlay 2 and HomeKit).
• 🔥 Amazon Fire TV Stick 4K (Requires AirScreen application installation for AirPlay).
• 📦 Xiaomi TV Box S2 (supports Miracast and DLNA).

For example, to connect through fire. TV Stick:

1. Connect the console to the HDMI port on the TV.
2. In the App Store, install the AirScreen app on the console.
3. Launch the app and activate AirPlay mode.
4. On iPhone, select Screen Duplication and connect to Fire Stick.

Comparison of consoles:

When using Apple TV You also get access to exclusive features like HomeKit and Siri integration, but it's the most expensive option.

Alternative applications for duplication (ApowerMirror, LetsView)

If the built-in methods don't work, you can use third-party apps that emulate AirPlay or Miracast.

• 📱 ApowerMirror - Supports 4K and screen recording, but requires a subscription to remove watermarks.
• 🖥️ LetsView is a free solution with minimal latency, but limited to resolution 1080p.
• 🎮 TeamViewer QuickSupport – Suitable for remote support, but not optimized for multimedia.

Instructions for ApowerMirror:

1. Install the app on iPhone and Xiaomi Mi TV (via Google Play on your TV or third-party launcher).
2. Run the app on both devices and select Phone Screen Mirroring mode.
3. Connect to a single Wi-Fi network or use it USB-debugging (for wired connection).
4. On iPhone, allow screen access in the Device Management settings.

⚠️ Note: Apps like ApowerMirror can request permission to access notifications and files.

Advantages of third-party applications:

• 🔄 They are working on outdated Mi models. TV (Like Mi. TV 3).
• 📲 Support additional functions (screen recording, annotations).
• 🌍 Available on all platforms (including: Windows/Mac PC-streaming).

Disadvantages:

• 💰 Often require a paid subscription for full functionality.
• 🐢 Possible lags when transferring dynamic content (games, videos in the video game) 4K).
• 🛡️ Security Risks When Using Lesser-Known Applications.

💡

The app side is the best choice for outdated Xiaomi Mi models TV, They are inferior to native protocols in stability and security.

Problem Solving: Why Does Duplication Not Work?

If the iPhone screen is not duplicated on Xiaomi Mi TV, Check the following points:

Problem 1: The TV is not displayed in the list of devices

• 🔌 Make sure both devices are connected to the same Wi-Fi network (preferably 5 GHz).
• 🔄 Restart router and TV.
• 📱 On the iPhone, turn off the plane mode and VPN.
• 📺 On the TV, check if Miracast or AirPlay mode is enabled in the settings.

Problem 2: Latency of sound or video

• 🎵 In the settings of the TV, select Sound Mode → Synchronize your lips/sound and adjust the delay.
• 📶 Switch to a less loaded Wi-Fi channel (use applications like WiFi Analyzer).
• 🔌 For critical tasks (games), use a wired connection.

Problem 3: Black screen or artifacts

• 🖥️ Check the compatibility of permissions: on the iPhone open Settings → Screen and brightness → Screen resolution and select Standard.
• 🔄 Update the firmware of the TV and iOS on the iPhone.
• 🛠️ If you use an adapter, try another cable. HDMI (preferably supportive HDCP 2.2).

Problem 4: No sound when dubbing

• 🔊 On iPhone, check if No Sound is activated.
• 📺 On the TV, choose the right one. HDMI-Enter and check the sound settings (Settings) → Sound. → Output device).
• 🔌 If you connect via an adapter, try using Bluetooth headphones as a temporary solution.

💡

If the duplication works but the image quality is low, open AirPlay settings on your iPhone (long press on the duplicate button) and select Quality: High.

7. Optimizing duplication for games and videos

If you duplicate a screen for games (like Call of Duty Mobile or Genshin Impact) or viewing 4K HDR-It is important to minimize latency and maintain the quality of the image:

For games:

• 🎮 Use a wired connection through HDMI-adapter (delay) <20 miss).
• 📶 If you play Miracast, reduce the screen resolution on your iPhone to 720p game-setting.
• 🔋 Connect iPhone to charging – screen duplication quickly drains battery.

For the video:

• 🎥 For streaming Netflix or YouTube on 4K Use AirPlay or Apple TV (Other methods may reduce the resolution due to DRM).
• 🔊 For better sound, plug in Xiaomi Mi TV soundbar AV-receiver HDMI ARC.
• 📺 In the settings of the TV, activate the Movie or HDR color-enhanced.

For presentations:

• 📊 Use Keynote or PowerPoint with Presentation Mode – it automatically optimizes the display for the big screen.
• 🔄 Before starting, check that the TV is turned off Power Saving Mode (can mute the screen).
• 📎 If you are transferring animation slides, test ahead of time – some effects may not be displayed correctly through Miracast.

8. Comparison of methods: which way to choose?

The choice of the duplication method depends on your tasks, the model Xiaomi Mi TV And the iPhone version, and here's a comparison table with recommendations:

Selection recommendations:

• 🎬 For movies and TV shows - AirPlay or Apple TV.
• 🎮 For games — HDMI-adapter TV (if 120 Hz is supported).
• 📱 For social networks and web surfing - Miracast or ApowerMirror.
• 💼 For presentations – AirPlay or wired connection.

💡

For most users, the best balance of price and quality is given by the combination Miracast (for everyday tasks) + HDMI-Adapter (for games and critical tasks).

FAQ: Frequent questions