How to Reset Xiaomi TV Without a Remote: All Ways to 2026

Lost or broken the remote from Xiaomi TV, and need to reset? The situation is familiar to many: TV freezes after the update, does not respond to commands or requires reset before selling. Fortunately, the manufacturer has provided several alternative ways to hard reset without using the original remote. In this article, proven methods for models Mi TV 4/4A/4S/5, Redmi Smart TV and other lines based on Android TV or PatchWall.

The main problem with resetting without a remote is that you don't have access to the standard settings menu, but even then you can use hidden hardware buttons, ADB connectivity, or service combinations, and we'll look at all the options, from the simplest to the most technically challenging, so that you can bring the TV back to factory settings, regardless of its condition.

Important: the reset procedure deletes all installed apps, accounts and personal data. If the TV was previously linked to a Mi Account, after the reset, you may need to re-authorize.

1. Reset through hardware buttons on the body

The most versatile way is to use physical buttons, which are on any Xiaomi TV, usually located on the bottom or sidebar and hidden under a plastic stub.

• 🔍 Needle or thin object – to press miniature buttons.
• ⏱️ Timer – to accurately withstand retention time.
• 🔌 Power supply – the TV must be connected to the network.

Instructions for most models:

1. Turn off the TV with the power button (hold on for 3-5 seconds if it freezes).
2. Find the Reset button on the case (usually next to an HDMI or USB connector) and it can be signed as RST or denoted by a dot.
3. Press and hold the Reset button with a needle for 10-15 seconds.
4. Without releasing Reset, press the power button for 1 second and release it (hold only Reset).
5. After 5-10 seconds, the TV will start the reset process – the Xiaomi logo or download animation will appear.

If there is no Reset button (as on some Redmi Smart TV models), use the combination:

Hold the power button + volume down button (-) 10 seconds

Turn it off. USB-TV-device

Check that the TV is connected to the outlet

Prepare a needle or toothpick

Write down Mi Account details (if tied)-->

⚠️ Attention: On Mi models TV 5 Pro and later hardware reset can block the bootloader. If the TV does not turn on after the procedure, you will need firmware through the bootloader. USB.

2. Reset via service menu (if screen is running)

If the TV is turned on but the remote is not available, you can use a service menu that opens with buttons on the case, which is suitable for models with physical volume (+/–) and confirmation (OK) buttons.

Procedure:

1. Turn on the TV with the power button.
2. Press and hold the OK button (center joystick button if any) for 5 seconds.
3. Without letting go OK, press the button quickly – (shut down volume) 3 times.
4. Let go of OK, the hidden menu should open.

On the service menu:

• 🔄 Select Factory Reset (move - volume buttons, select — OK).
• 🔐 Confirm the reset (may be required to enter) PIN-code - by default 0000 or 1234).
• ⏳ Wait for the reboot (it will take 2-5 minutes).

On some firmware, the path to reset is different: Service menu → Advanced Settings → Restore Default.

💡

If the OK button is missing, use the combination: hold the power button + the + button (volume) for 8 seconds, then release the power, continuing to hold the + button for another 2 seconds.

3.Dumping via ADB (for advanced users)

If you have access to USB-TV port and computer, you can reset via Android Debug Bridge (ADB). This technique requires minimal technical skills, but works even on locked devices.

What you need:

• 💻 Computer with Windows/Linux/MacOS.
• 🔌 Cable USB-A → USB-A (or USB-A → Micro-USB, depending on the TV model).
• 📥 Utility. ADB Tools by Google.

Step-by-step:

1. Download and unpack ADB Tools on your computer.
2. Connect the TV to your PC with a cable (use a USB port on the back of the TV marked as Service or OTG).
3. Open the command line (cmd) in the folder with ADB and execute: adb devices If the TV is determined (the serial number will appear), enter: adb shell am start -n com.android.tv.settings/.device.admin.DeviceAdminResetActivity
4. On the TV screen, a reset window will open - confirm the action with volume buttons.

If the standard command doesn’t work, try an alternative:

adb shell am start -a android.settings.SETTINGS --es input_extras show_fragment:com.android.tv.settings.device.admin.DeviceAdminResetFragment

⚠️ Note: On PatchWall firmware TVs below 2.0 command ADB It might not work because of manufacturer limitations.

4. Reset via the Settings app (if you have a mouse or keyboard)

If you have a wireless mouse, keyboard or gamepad connected to your TV, you can reset via the standard Android TV menu. This is the safest and does not require technical knowledge.

Instructions:

1. Connect your mouse to the USB TV port (or use a Bluetooth keyboard).
2. Go to the settings menu: Home screen → Settings (cogs) → Device → Reset.
3. Select Reset settings to factory.
4. Confirm the action by following the instructions on the screen.

On PatchWall firmware, the path may be different: Settings → About TV → Data Reset.

If there is no mouse, there is a smartphone with IR-It can be used as a remote control device through applications like Mi Remote (available for Android and iOS), but this method only works if the TV responds to infrared signals.

5. Recovery Mode Reset (for power users)

If the TV doesn’t load or is stuck on the logo, you can use Recovery Mode, a method similar to resetting on Xiaomi smartphones, but requires caution – incorrect actions can lead to the “bricking” of the device.

How to log in to Recovery:

1. Turn off the TV with the power button.
2. Press and hold the button (shrink volume) on the body.
3. Without letting go – press the power button for 1 second and release it.
4. Hold until the menu appears (usually 10-15 seconds).

On the Recovery menu:

• 🔄 Select the Wipe option data/factory reset (movement – volume buttons, selection – power button).
• 🔘 Confirm the action (Yes).
• 🔄 After reset, select Reboot system now.

⚠️ Note: On TVs with an Amlogic chipset (e.g. Mi) TV 4A 32") the Recovery menu may not have a reset point. In this case, use the power button retention combination. + button-up "+" within 20 seconds for forced discharge.

6. Alternative methods: remote from another device or universal remote

If none of these methods are suitable, you can try to control the TV with:

• 📺 Remote from another Xiaomi TV — many models use the same IR commands. TV 4A He often works with Redmi Smart. TV.
• 🔄 Universal Remote (e.g. Xiaomi Mi Universal Remote or BroadLink) RM4). Set it up to manage Android TV.
• 📱 Smartphones with IR transmitter – through Mi Remote, Peel Smart Remote or AnyMote applications.

To configure the universal remote:

1. Download the remote manufacturer’s app (e.g. BroadLink or Xiaomi Home).
2. Select the device type – TV → Xiaomi → Android TV.
3. Follow the synchronization instructions (usually you need to direct the remote to the TV and hold the OK button until the indicator flashes).

If the TV responds to commands, go to the settings and reset in the standard way.

💡

Universal remotes often do not support service functions (for example, login to Recovery).

7. What to do if the discharge did not help?

In rare cases, even after resetting, the TV may not work properly.

• 🔄 Incomplete reset – repeat the procedure by holding the buttons longer (up to 30 seconds).
• 📥 Damaged firmware - requires flashing through USB (For specific instructions for a particular model, look for forums 4PDA or XDA-Developers).
• 🔌 Hardware malfunction – if the TV doesn’t turn on even after resetting, check the power supply or contact the service center.

If after resetting the TV requires you to enter a password from Mi Account, but you do not remember it:

1. Go to account.xiaomi.com and restore access.
2. If your account is not yours (for example, a TV is purchased by hand), contact the previous owner or provide proof of purchase in support of Xiaomi for unlocking.

PatchWall models may require resetting the region after reset.Select India or Global (depending on firmware) to avoid content restrictions.

FAQ: Frequent questions about Xiaomi TV reset