On the screen Xiaomi hare and Android: step-by-step instructions for exit

Owners of Xiaomi, Redmi and POCO smartphones often face a situation where, after accidentally pressing buttons or crashing in the system, the device stops loading in the usual interface. Instead of a desktop, the user sees an image of a sleeping rabbit repairing a robot and the inscription FASTBOOT in orange or blue. This picture can scare an inexperienced user, creating the illusion of a serious breakdown or “brick”, but in most cases the device is completely functional and requires only the correct algorithm of actions to return to normal mode.

Fastboot is a special diagnostic protocol built into the Android operating system that allows you to perform low-level operations with the device, such as flashing, unlocking the bootloader or resetting memory partitions. The appearance of a rabbit means that the smartphone has moved into this command standby mode, most often due to accidental clamping of the key combination when you turn on or due to a software conflict. Understanding the causes of this situation will help you not only quickly solve the problem, but also prevent it from recurring in the future.

In this article, we will discuss all the safe ways to exit from Fastboot mode, from simple mechanical actions to software recovery methods through the computer. We will look at situations when the system freezes, and explain how to distinguish a software failure from a hardware malfunction of the buttons. It is important to remain calm and follow the instructions clearly so as not to aggravate the state of the software of your gadget.

Reasons for the appearance of a hare and the inscription Fastboot on Xiaomi

The main and most common reason for the appearance of the image of a hare is the inadvertent entry into fast load mode when the device is turned on. This occurs when the user, trying to turn on the phone, simultaneously presses the power button and the Volume Down button. In a hurry or when using a protective case that can press on the side face, this press is automatically, and the system priority starts precisely the diagnostic mode, ignoring the usual boot of the OS.

But there are software prerequisites that require more attention: a failure in the MIUI or HyperOS operating system, an interrupted firmware update or damage to system files can lead to the phone voluntarily switching to Fastboot mode each time it is turned on, and this reaction can be observed after the failure of third-party applications that require deep access rights, or if there are conflicts in the file system after a sudden power outage.

⚠️ Warning: If the hare appears immediately after the charger is connected or spontaneously during operation, this may indicate a sticking of the volume button. In this case, mechanical action on the keys may temporarily help, but repair will be required.

Another reason may be an attempt to unlock the bootloader or a failed attempt to install a custom recover. If the process was interrupted or performed with errors, the device is locked in the standby command mode to restore functionality. In such cases, a simple restart may not be enough, and you will need to intervene through a computer using specialized software.

• 🐰 Accidental simultaneous pressing of the power and volume button down when switching on.
• 🔌 Failure to update system software over the air.
• 💾 Damage to system files or conflict of installed drivers.
• 🔘 Physical sticking or failure of the volume reduction button.

The easiest way: forced reset

Ninety percent of the time, especially if you accidentally put your phone in this mode, you just have to make a forced reboot to fix the situation. This method is secure for user data and does not require a computer connection or special skills. The algorithm of actions is extremely simple and versatile for all models of Xiaomi, Redmi and POCO smartphones.

You need to find the power button, which is usually located on the right or left side of the case. Press it with your finger and hold it for a long time - from 10 to 20 seconds. Do not release the button immediately after the screen goes out; wait for the vibration and the logo of the Mi or Redmi brand. If after the logo appears, the phone again shows the hare, repeat the procedure, holding the button a little longer.

Importantly, while holding the button, the screen may go out and light up again, and various menus may appear. Your job is to ignore these intermediate states and keep holding the button until the system is fully restarted. If the device responds to touch, but the cycle repeats, try a combination of buttons to exit: press both the power button and the Volume Up button for 10-15 seconds.

⚠️ Warning: Do not remove the battery if the phone model has a non-removable battery. Forced reboot of the power button is a standard method of interruption of processes and will not harm the device.

💡

Holding the power button for 15-20 seconds is a standard method of exiting the Fastboot mode, which solves the problem in most cases without losing data.

Using the Recovery Engineering Menu for Resetting

If a simple reboot doesn’t help and the phone returns to the image of the hare, the files responsible for normal operating system load may be damaged. In this case, you should use Recovery Mode Recovery Mode. This menu allows you to reset your settings to factory or try to restore the system without losing user data, although in critical situations, data reset may be the only way out.

To enter the recovery menu, you need to turn the device off completely (if it does not turn off, wait for the battery to drain or use the combination to turn off). Then press both the power button and the Volume Up button at the same time. Hold both buttons until the logo appears, then release the power button, continuing to hold the volume button until the main Recovery menu appears.

In the menu, the navigation is done with volume buttons (up-down), and the choice is confirmed by the power button. You need to find the Wipe Data item. Within this section, there are often two options: Wipe All Data (full reset with removal of everything) and Keep User Data (reset settings with saving files). First, you should try the option with saving data. If after the reboot the problem persists, you will have to resort to a full reset, having previously realized the risk of losing information.

• 📱 Turn off your smartphone and press the power. + Volume Up for Recovery Entry.
• 🔽 Use volume buttons to navigate through menu items.
• 🔄 Select Reboot for a normal reboot or Wipe Data for a reset.
• 💾 Keep User Data allows you to try to save files when you crash.

Exit from Fastboot via computer and ADB

For advanced users who don’t have physical buttons running or a software failure blocks standard methods, there is a way to exit through a computer, which requires installing drivers for Xiaomi on a PC and the ADB (Android Debug Bridge) and Fastboot toolkit, which allows you to send a command to force the restart directly to the device controller.

The first step is to connect the smartphone with the screen “hare” to the computer through the original USB-On your computer, open the Device Manager and make sure that a device called Android Bootloader Interface or the like appears in the "Android Devices" or "Ports" section. If a device is defined as an “Unknown Device”, you will need to install Qualcomm or MediaTek drivers depending on your smartphone’s processor.

After successful driver installation, open the command line (cmd) in the folder with installed ADB-To check the connection, type in the command fastboot devices. If the serial number of the device is displayed in response, the connection is established. To exit the mode, enter the command fastboot reboot. The smartphone should immediately restart in normal mode.

fastboot devices


fastboot reboot

If the fastboot reboot command doesn't help, you can try the fastboot continue command, which force the normal OS boot to run, ignoring the Bootloader errors. However, if the bootloader itself is damaged, this method may not work, in which case you may need to completely flash the device through the Mi Flash Tool utility, which is a more complicated procedure.

💡

Use the original. USB-cable and connect it directly to the motherboard port on the back of the PC, avoiding USB-hubs to provide stable power and data transmission.

Diagnostics of hardware problems and buttons

If the software methods fail and the phone constantly returns to the screen with the hare immediately after trying to boot, there is a high probability of physical malfunction. Most often the problem lies in the Volume Down button. The internal contact of this button can oxidize, seal or deform, which makes the system "think" that the button is constantly pinched, and every time it turns on, it goes into Fastboot mode.

For initial diagnosis, try tapping your finger gently (without fanaticism) on the volume button area or pressing it quickly several times to try to "curl" the mechanism. You can also try to slightly curve the body in the button area (very carefully) to change the geometry and break contact. If after such manipulations the phone boots normally, the problem is likely hardware.

The table below shows the main symptoms and possible solutions for hardware problems:

If you do not have the skills of soldering and repairing electronics, self-opening the device to clean the button can lead to loss of warranty and damage to other components. If you confirm a hardware malfunction of the buttons or plumes, you are recommended to contact an authorized service center to replace the button module or the plume.

Prevention and Frequent Questions (FAQ)

To avoid the reappearance of the screen with a hare and an android, you should follow a few simple rules of operation of the Xiaomi smartphone. First of all, use high-quality protective cases that do not exert excessive pressure on the side faces and buttons of the device. Cheap silicone cases can tan and constantly press the volume button, provoking entry into Fastboot mode.

It is also recommended to update the software regularly, as newer firmware versions often fix bugs that cause cyclic reboots. Avoid installing applications from unverified sources and do not interrupt the system update process even if the battery runs out - always monitor the charge level before starting important system operations.