Reboot on Xiaomi: when you need, how to do it right and what to do if the device does not respond

Owners of Xiaomi equipment sooner or later face the need to restart the device – whether it’s a Redmi smartphone, a Mi TV TV The term "reboot" refers to the process of completely turning off and on the system, which helps to eliminate temporary failures, software errors or "hangs". However, not everyone knows that a wrong reboot can make the problem worse, especially if you’re dealing with a damaged file system after a failed update.

In this article, we will analyze all reboot methods for different types of Xiaomi equipment, including soft reboot (via the menu), hard reset (buttons), as well as emergency methods for “brick” devices. MIUI, Mi TVs TV And routers, because of their architectural features, if your device is no longer responsive to commands or is unstable after the upgrade, you'll find a solution here.

What is Rebuke and When is It Needed

A reboot is not just about turning a device off and on, but unlike a regular Power Off, a full reboot reset resets the state of RAM, re-initiates the drivers and the kernel of the system, which helps in cases where:

• 🔄 Interface freezes – when the screen does not respond to touch and buttons do not work.
• 🐢 Slowdown of work – lags, slowing down after prolonged use.
• 🔌 Network problems – Wi-Fi or mobile Internet are not connected despite the correct settings.
• 📱 Failures after the update - if the firmware MIUI Android TV wrongly.
• 🔋 Battery malfunctions – when the charge “jumps” or the device suddenly shuts down.

It is important to understand that the rebuke is not a panacea for hardware failures (such as a damaged screen or charging connector), but in 80% of software failures, it restores performance, and if the Xiaomi device does not turn on even after a hard reset, the problem may lie in a damaged bootloader or a faulty memory chip.

⚠️ Attention: Frequent forced reboots (especially on smartphones) can shorten the life of flash memory.

How to reboot Xiaomi smartphones (Redmi, POCO, Mi)

Devices on the base MIUI It supports several reboot options. The choice of method depends on the state of the device:

• 📱 Soft reboot – via the settings menu (if the system responds).
• 🔘 Hard Rebuke - Power buttons + Volume Up/Down (if the screen is frozen).
• 🛠️ Emergency reset – via Fastboot or Recovery (if the device is not turned on).

Let us examine each method in detail.

Method 1: Soft reboot via menu

If your smartphone responds to touch, use the standard method:

1. Open the Settings. → The phone.
2. Tap on Reboot (or Reboot in new versions) MIUI).
3. Confirm the action, wait for the shutdown and automatic switching on.

V MIUI 14 and newer path may differ: Settings → Additionally. → Reboot: on some models (e.g, POCO F5) The option is hidden in the System section.

Close all applications

Connect to charging (if the charge is below 20%)

Save important data (requirement does not delete files, but it is better to be safe)

Turn it off. Bluetooth/Wi-Fi, If they are not needed after the reboot-->

Method 2: Hard buttons are rebuked

If the screen is unresponsive or the device is “hung” on the Mi logo, use the button combination:

1. Press the Power button + Volume increase for 10-15 seconds.
2. Let go when the Xiaomi logo or vibration appears.
3. If it doesn’t work, try the food. + Turning down the volume.

Some models (such as the Redmi Note 12) may need to hold the buttons for up to 20 seconds. If the device does not turn on after that, go to emergency methods.

⚠️ Note: On smartphones with AMOLED-With screens (e.g. Xiaomi 13 Pro), long-term button retention can lead to burn-in effects (pixel burnout.

Method 3: Reboot via Fastboot (for experienced)

If your smartphone does not respond to buttons but is determined by your computer, use Fastboot:

1. Connect the device to the PC via USB.
2. Open the command line and enter: adb reboot bootloader ADB It does not work, use: fastboot reboot
3. Wait for the reboot.

This method requires Xiaomi drivers installed and an unlocked bootloader. If the device doesn't reboot after the command, check the connection or try another one. USB-port.

Reboot of Xiaomi Mi TVs TV

Mi TVs TV (series A2, P1, Q2 They have their own reboot logic, and unlike smartphones, there is no physical reset button, so software and hardware techniques are used.

Method 1: Through the settings menu

If the TV is responding to the remote:

1. Press Settings on the remote.
2. Go to the Device. → Reboot.
3. Confirm action. The TV will turn off and on automatically in 30 to 60 seconds.

On Android models TV 11+ (Like Mi. TV Q2 2023) the path may be different: Settings → System system → Reboot.

Method 2: Forced button rebuke

If the TV is stuck on the logo or does not respond to the remote:

1. Find the touch power button on the back (usually under the Mi logo).
2. Hold it for 10-15 seconds until the TV is turned off.
3. Release and press again to turn on.

On some models (e.g., Mi) TV A2 32" button can be hidden under a plug. Use a thin object (clip) to press it.

💡

If the TV doesn't turn on after a forced reboot, disconnect it from the network for 5 minutes.This will reset the power capacitors and often solves the problem.

Method 3: Recovery Reset (for Advanced)

If the TV is cyclically restarted or does not load the system:

1. Turn the TV off the socket.
2. Hold the Power Button on the case and connect the power cable.
3. Hold the button until the Recovery menu appears (usually in 20 to 30 seconds).
4. Select Reboot system now using the volume buttons on the remote (or buttons on the case).

In the Recovery menu, you can also reset to factory settings (Wipe) data/factory reset, but it will delete all data.

Reboot of Xiaomi routers (Mi Router, Aiot Router)

Xiaomi routers (Mi Router) 4A, AX3600, BE7000) They reboot differently than mobile devices:

• 🌐 Internet problems (no connection, low speed).
• 🔌 Wi-Fi failures (devices are not connected).
• 🔄 Firmware updates (if the router got stuck during the update).

Method 1: Through the Web Interface

If the router responds to requests:

1. Open your browser and type 192.168.31.1 (or miwifi.com).
2. Log in (login and password from the sticker on the router).
3. Go to Settings. → System system → Reboot.
4. Click Reboot and wait until completion (2-3 minutes).

Method 2: Reset button

If the web interface is not available:

1. Find the Reset button on the back of the router (usually in the recess).
2. Press it once (don't hold it!) the router will reboot.
3. If it does not work, hold the button for 5-7 seconds (this will reset the settings to the factory).

⚠️ Attention: On Xiaomi routers with MiWiFi firmware ROM Reset retention for more than 10 seconds results in a complete reset, including Wi-Fi settings and passwords.

Method 3: Power outage

If the router does not respond to the buttons:

1. Turn off the power cable from the socket.
2. Wait 30 seconds (this is important for the discharge of capacitors!).
3. Connect the power back. The router will boot in 1-2 minutes.

On models with an external antenna (for example, AX6000) After this reboot, you may need to reconfigure Wi-Fi channels.

💡

The router reboot does not solve the Internet problems from the provider. If the connection does not appear after the reboot, check the cable from the provider or contact technical support.

What to do if the Rebbe does not help

If Xiaomi’s device doesn’t turn on after a reboot or is unstable, the problem could be more serious.

The smartphone does not turn on after reboot

• 🔋 Battery is discharged - plug in to charge for 30 minutes, then try turning on.
• 🔄 Firmware failure – try to log into Recovery (Power) + Volume Up and select Wipe Cache.
• 🛠️ Damaged bootloader - requires flashing through Fastboot (instructions for 4PDA Xiaomi Community).

The TV hangs on the logo

• 📺 Update failure – disconnect from the network for 5 minutes, then re-enable.
• 🔌 Problems with HDMI-Ports – Turn off all cables and try to turn them on without them.
• 📱 Damaged firmware - requires reflashing through USB (instruction).

Router doesn't give away Wi-Fi after reboot

• 📡 Failing settings – reset with the Reset button (5 seconds).
• 🔌 ISP issues – check if the indicator is on WAN.
• 🔄 Conflict IP — change IP router in settings on 192.168.0.1.

If none of the methods worked, contact the Xiaomi service center or create a theme on the forum. 4PDA pattern-and-symptom.

FAQ: Frequent questions about Xiaomi reboot