Recovery Mode on Xiaomi Redmi Pro smartphones is a service environment that allows you to perform critical operations: reset to factory settings, install firmware or restore the system after a crash. However, logging into it often causes difficulties for users, especially if the device is locked or does not respond to standard key combinations.
In this article, we will discuss all the current ways to sign in to Recovery on Redmi Pro (including the Redmi Pro 5G and Redmi Pro 2023 models), as well as the typical errors and their solutions.
If your smartphone is stuck on the Mi logo, does not turn on or requires reset, the instructions below will help bring it back to life without contacting the service center.
1. Standard method: combination of power and volume buttons
The most common method of logging into Recovery Mode is using hardware buttons. It works on Xiaomi Redmi Pro regardless of the MIUI version, but requires precise follow-up.
The algorithm for all Redmi Pro models (including Redmi Pro 5G)
⚠️ Note: If the buttons are held, the smartphone simply turns on as normal, then you let the keys go too early. Repeat the attempt, holding them longer (up to 15 seconds.
Is the smartphone turned off (not in sleep mode)?
Are both buttons pressed at the same time?
Do you hold the keys for at least 10 seconds?
Are there any physical damage to the volume buttons?
-->
On some firmware (e.g. MIUI 14 and later), a Fastboot may open instead of a standard Recovery, which means that the bootloader is locked and a different method is required (see Section 3).
2. ADB login (for unlocked devices)
If the hardware buttons don’t work (for example, due to damage), you can log in to Recovery via ADB (Android Debug Bridge), a method that requires pre-configuring debugging over USB and only works on devices with an unlocked bootloader.
Step-by-step:
- Connect Redmi Pro to your computer via USB-cable (original!).
- Turn on Developer Mode: Go to Settings → About Phone → MIUI version and tap it 7 times.
- Return to Settings → Additional → For developers and activate Debugging over USB.
- On your computer, open the command line (Win + R → cmd) and type: adb devices Make sure the device is identified (its serial number should appear).
- Run the command to reboot in Recovery: adb reboot recovery
If the smartphone is restarted to normal mode after the command, then the bootloader is blocked. In this case, use the method via Fastboot (section 3).
What if the ADB can’t see the device?
3. Method via Fastboot (for blocked bootloader)
If the standard button combination leads to a Fastboot Mode (a screen with a rabbit and a sign). FASTBOOT), So the bootloader is locked, and in this case, you can only log in to Recovery via the Fastboot command.
Instructions:
- Turn off your smartphone and press Power + Volume Down (-) to log into the Fastboot.
- Connect the device to the PC and open the command line.
- Check the connection: fastboot devices
- Follow the command to go to Recovery: fastboot boot recovery.img Note: The recovery.img file must be downloaded in advance (for example, from the firmware for your Redmi Pro model).
⚠️ Note: If after this command the device goes back to Fastboot, it means that it has custom Recovery installed (for example, TWRP), Xiaomi's official Recovery doesn't support a locked bootloader.
Button combination
ADB
Fastboot
Never came in.
-->
4. Alternative methods (if nothing works)
If none of the above methods worked, try the following options:
Method 1: Through the MIUI menu (if the phone is turned on)
- Go to Settings → About the phone → System update.
- Slap the icon. ⋮ (three points) in upper right corner.
- Select Reboot in Recovery.
Method 2: Using Quick Reboot (requires Root)
Method 3: Hardware reset (if Recovery is not available) If the smartphone does not respond to any commands and Recovery is not available, only a complete reset through a testpoint (requires disassembly of the device), this method is used in service centers and it is not recommended for self-execution.
-->
5. Typical errors and their solutions
When you try to log in to Recovery, users often face problems, and let's look at the most common ones and how to fix them.
| Mistake. | Reason. | Decision |
|---|---|---|
| The smartphone is turned on in normal mode | The buttons were not kept long enough. | Try again by holding the keys for 15+ seconds. |
| Fastboot is coming instead of Recovery | bootloader locked | Use the method through fastboot boot recovery.img |
| The screen goes out after the Mi logo | Recovery section damaged | Recovery via Mi Flash Tool |
| ADB does not see the device | No drivers or debugging not included | Install Xiaomi USB Drivers and check the debugging settings |
⚠️ Warning: If you see a No command sign with an Android robot lying on after you log in to Recovery, it means that the Recovery partition is damaged.
6.Security: What You Can and Can't Do in Recovery
Recovery mode provides access to critical system functions, so incorrect actions can lead to data loss or a “brick” of the device.
What can be done:
- 🔄 Wipe Data/Factory Reset – reset to factory settings (will delete all data, but return performance).
- 📥 Apply update from ADB — Installation of official updates via PC.
- 🔧 Mount /system — mounting the manual editing section (for experienced users only).
What can you do (unless you are sure)?
- ❌ Wipe Cache Partition – Cleaning the cache rarely helps, but can cause app malfunctions.
- ❌ Format Data – complete formatting of internal memory (deleting everything, including files in the file format) /sdcard).
- ❌ Installation of informal firmware (Custom) ROM) loader-free.
-->