How to turn off a suspended Xiaomi phone: from forced reboot to emergency reset

Your Xiaomi suddenly stopped responding to touch, the screen stopped in one image and the control buttons do not work? The situation is familiar to many owners of smartphones of this brand — especially if the device is running on MIUI with an abundance of background processes. The reasons for freezing can be different: from overloading RAM to a failure of firmware after updating. The main thing is not to panic: in 90% of cases, the phone can be returned to life without contacting the service center.

In this article, we will discuss all possible ways to turn off a suspended Xiaomi – from the simplest (prolonged pressing of the power button) to emergency (removing the battery or resetting via Fastboot). Special attention will be paid to the nuances for different models: for example, on the POCO F5, the button combination is different from the Redmi Note 12, and on the old Mi A1 with a clean Android One, universal methods work.

1. Forced reboot: a universal method for all Xiaomi

The safest and most recommended method is a hard reset, which simulates battery extraction and restarts the system without interfering with user data, and is suitable for Redmi, POCO, Mi and Black Shark (except for models with a fixed battery until 2016).

Instructions:

• 🔋 Press the power button for 10-15 seconds on most models (Redmi Note 10 Pro, POCO X4 Pro) vibration or Mi logo signal the start of a reset.
• ⏳ If there is no reaction after 20 seconds, try the combination: power button + Increased volume (hold 10-20 seconds).
• 🔄 On some devices (for example, Mi 11 Ultra) triggers a triple press: + Loudness up + Loudness down.

⚠️ Warning: If the phone starts vibrating but the screen stays black, don't let go of the buttons! This could be a sign of getting stuck during bootloop. №3.

2. Battery Removal: A Radical Method for Older Models

Before 2017, many Xiaomi smartphones (e.g. Redmi 3S, Mi 4i) had a removable battery, and if your device falls into this category, a physical power outage is the most reliable way to unlock it, but on newer models (beginning with the Redmi Note 5), the battery is soldered to the board, and trying to remove it without tools will damage the plumes.

How to check if the battery is removable:

• 🔍 Look at the back cover: if there are visible gaps or mounts on the latches, most likely, the battery is removable.
• 📱 Type a phone model into a search engine that says "removable battery." For example, "Xiaomi Redmi." 4A removable».

If the battery is removable:

1. Turn off your phone (if it reacts).
2. Remove the back cover with a plastic shoulder blade or mediator.
3. Disconnect the battery plume (if any) or simply remove the battery for 30 seconds.
4. Install the battery back and turn on the device.

⚠️ Attention: On models POCOPHONE F1 And the Mi 8, even with a non-removable battery, you can turn off the power by removing the back cover and gently pressing the battery contacts (experience is required.

Turn off your phone (if it reacts)

Prepare a plastic spatula or mediator

Check the model for battery removability

Turn off charging and headphones-->

3. Recovery Mode reset: if the phone is stuck on the logo

If Xiaomi only loads to the Mi or POCO logo and then hangs, the problem may be a damaged boot section or update conflict, in which case, logging into Recovery mode will help.

How to log in to Recovery:

1. Turn off the phone (as in the method) №1).
2. Hold the combination: 📱 For most models: Nutrition + Loudness up. 🎮 For Black Shark: Nutrition + Loudness up + Loudness down.

Android robot

From the Recovery menu, select:

• 🔄 Reboot system now – normal restart (if the phone is temporarily getting stuck).
• 🗑️ Wipe data/factory Reset - Reset completely (deletes all data!) Use only if other methods have not helped.
• 📦 Apply update from ADB — If you need to run your phone through a computer.

⚠️ Attention: On some firmware MIUI (The Recovery menu can be in Chinese, especially in Chinese:

4.Use of ADB-Teams: For Advanced Users

If the phone is responding to a connection to a computer (for example, it makes sound when connecting over USB), but the screen does not work, you can try to reboot it via Android Debug Bridge (ADB), this method requires pre-activation of debugging over USB in the developer settings.

Step-by-step:

1. Install ADB and Fastboot Tools on PC.
2. Connect your phone to your computer via USB.
3. Open the command line (Win + R → enter cmd).
4. Enter the commands in order: adb devices (should appear serial number of your Xiaomi), adb shell reboot -p (forced shutdown) adb shell reboot recovery (reboot in Recovery, if necessary)

If the adb device command does not show the device, but the phone is defined as “Qualcomm 9008” or “MTK Preloader”, this means that the smartphone is in emergency mode (EDL), in which case only firmware through the Mi Flash Tool will help.

💡

Before using ADB, check if USB debugging is enabled: go to Settings → About Phone → MIUI version (click 7 times to activate Developer Mode), then to Additional → For Developers → Debugging by USB.

5. Firmware through Fastboot: The last resort in bootloop

If the phone is constantly restarting (bootloop) or hanging on the logo, and Recovery does not help, you just need to flash it through Fastboot, which deletes all data, but brings the device back to life. It is suitable for all Xiaomi models, including the POCO X3 Pro, Redmi K50 and Mi 12.

What you need:

• 🖥️ Windows computer.
• 🔌 Cable USB (preferably original).
• 📁 Firmware for your model (download from the official website).
• 🛠️ The Mi Flash Tool.

Instructions:

1. Turn off the phone (forced).
2. Press the Nutrition + Volume down to enter the Fastboot (a hare in a hat-eared hat will appear).
3. Connect the phone to the PC.
4. Unpack the firmware (.tgz →.tar) and launch the Mi Flash Tool.
5. Select the firmware folder and click Flash (select clean all for a full reset).

⚠️ Note: Fastboot removes all data, including photos, contacts and apps. If the phone has been activated sync with Mi Account, some of the data (contacts, notes) can be restored after logging into the account.

6. Hardware reset: Reset button (for rare models)

Some Xiaomi models (such as the Mi Max 2 or Redmi 5 Plus) have a hidden Reset button that allows you to force the device to restart without access to the screen. SIM-card-back.

How to find and use:

• 🔍 Check the phone for a small hole with the words Reset.
• 📍 If there is no hole, check under the back cover (on removable batteries, the button may be under the battery).
• 🖊️ Press the button with a thin object (clip, toothpick) for 5-10 seconds.

⚠️ Note: On most modern models (POCO F4, Redmi Note 11) No hardware reset button. Don't confuse it with a microphone hole or antenna jack!

7. Prevention of hangings: how to avoid problems in the future

To prevent Xiaomi from hanging out again, follow these tips:

• 🧹 Clean the cache once a month: go to Settings → Warehouse → Cleanup.
• 🔄 Update. MIUI Do not install beta versions regularly unless you are sure of their stability.
• 🚫 Remove unused apps, especially those that work in the background (messaging apps, games).
• 🔋 Watch the health of the battery: if it is swelling or discharges quickly, replace it.

On models with a MediaTek processor (such as the Redmi 10C), freezes are often associated with overheating. Use vented cases and avoid gaming when charging.

💡

Regular cleaning of the cache and updating the firmware reduce the risk of hanging by 70%.

FAQ: Frequent questions about Xiaomi hangouts