How to Forcely Shut Down Xiaomi Device Without Rebooting: The Complete Guide

The situation when Xiaomi device is stuck on the logo, does not respond to buttons or requires emergency shutdown without a standard reboot is familiar to many users. Unlike the usual shutdown through the menu, forced shutdown avoids the restart cycle, which is especially critical when updating the firmware or failures in MIUI or Google TV on TVs. However, not all methods are equally safe: some can lead to data loss or even “bricking” the device.

In this article, we’ll break down all the current forced shutdown methods for Xiaomi smartphones, tablets, and TVs (including Redmi, POCO, Mi TV), We will focus on methods that do not require physical battery removal or power outages, because they minimize the risks to hardware. You will also learn what actions are strictly prohibited by forced disabling of specific lines of devices (for example, Mi). TV A2 Or the Redmi Note 12 Pro.+).

Why is the standard shutdown not working?

Before we go into radical action, it's important to understand why the device doesn't respond to normal commands. 80 percent of the time, the problem is:

• 🔄 System freezes — MIUI Android TV "hung because of firmware errors (especially after updates through the OTA).
• 📱 Hardware conflicts – incompatibility of modules (for example, after replacing the display or battery with non-original ones).
• 🔋 Critical battery discharge – if the charge level has dropped below 3%, the device can block all functions except charging.
• 🛠️ Failure in the bootloader – typical for devices with an unlocked bootloader or after unsuccessful attempts to flash custom software.

On Xiaomi Mi TVs (especially P1E, Q2), a common cause is a Launcher (Android TV shell) malfunction that blocks access to the shutdown menu, in which case a forced shutdown becomes the only way to regain control of the device.

⚠️ Note: If your Xiaomi device is in Fastboot mode (the screen has a sign with a rabbit and a sign). FASTBOOT MODE), Forced shutdown can interrupt critical firmware processes, in which case, first try to exit mode with the command fastboot reboot via the PC.

Method 1: A combination of buttons for smartphones and tablets

The most versatile method for mobile devices is the use of hardware buttons. It works on all Xiaomi smartphones, from the Redmi 4X (2017) to the flagship Xiaomi 14 Ultra (2026).

Instructions:

1. Press and hold the Power button and Volume Up button at the same time.
2. Hold them for at least 10-15 seconds – even if the off menu appears on the screen, do not let go.
3. The screen will go out and the device will shut down completely (without vibration or sound).

For models with a remote battery (for example, Redmi 3S or Mi Max), this method works faster – 5-8 seconds is enough. On new devices (for example, POCO F6 Pro) it can take up to 20 seconds of retention.

Make sure the device is not connected to the charger

Disconnect all cables (USB, HDMI, headphones)

Remember the start time of button retention

Do not use this method more than 1 time a day

-->

⚠️ Note: On smartphones Xiaomi with AMOLED-screens (e.g. Xiaomi) 13T or Redmi K60 Pro) Prolonged button retention can cause burn-in effect (pixel burnout) due to static display of the off menu. If the screen does not go out within 20 seconds, release the buttons and try another method.

Method 2: Forced shutdown of Xiaomi TVs

Mi TVs (including the A2 43, Q2 55, P1 75) do not have a physical power button on the case, making it difficult to force shutdowns.

Method A: Reset button (for 2020–2026 models only)

On the back of the TV (usually next to HDMI ports) there is a hidden Reset button.

1. Turn off the TV from the remote (if it reacts).
2. Find the Reset button (may be indicated by a dot or an RST label).
3. Press and hold it for 10-12 seconds with a thin object (clip, toothpick).
4. The power indicator will flash red - release the button.

Method B: Power outage (extreme case)

If the TV is completely frozen and does not respond to the remote or reset button:

• 🔌 Pull the power cord out of the socket.
• 🕒 Wait 30 to 60 seconds (this is important for the discharge of capacitors!).
• 🔄 Connect back and turn on the TV with a button on the remote.

On Xiaomi TVs with Google TV (such as Mi TV Q2 2023), a forced shutdown can cause HDMI-CEC settings to reset, which will require you to reconfigure sync with soundbars or consoles.

Method 3: Using ADB to safely shut down

If your Xiaomi device is connected to a PC and recognized in the system (even in a freeze state), you can use Android Debug Bridge (ADB) for a soft forced shutdown.

• 📱 Smartphones with enabled debugging USB (Settings → The phone. → Version. MIUI → 7 taps by assembly number → For developers → Debugging by USB).
• 🖥️ Mi TVs TV Unlocked Developer Mode (Settings) → On TV. → Android version TV → taper).

Instructions:

1. Connect the device to the PC via USB (for TVs – via Wi-Fi, if configured debugging over the network).
2. Open the command line (Windows) or terminal (macOS/Linux) and type:

adb devices

If the device appears in the list, do:

adb shell reboot -p

This command initiates a correct shutdown without rebooting, similar to pressing the power button in the menu.

For devices with unlocked bootloader (for example, after the firmware Xiaomi.eu), you can use a more rigid command:

adb shell "echo 1 > /sys/power/state"

⚠️ Note: On Xiaomi TVs with PatchWall firmware (Indian models) the adb shell reboot team -p If you have a manufacturer's limitations, use the alternative: adb shell input keyevent. 26 This simulates pressing the power button on the remote.

💡

If ADB can’t see the device, try reinstalling Xiaomi USB Drivers or using a USB 2.0 port (on some PCs, USB 3.0 is incompatible with debugging).

Method 4: Emergency shutdown through recovery mode

If the device is stuck on the MI or POCO logo and does not respond to buttons, you can try to enter Recovery Mode and turn it off from there, which works on all Xiaomi smartphones except models with a locked bootloader (for example, the new Redmi Note 13 from China).

Step-by-step:

1. Turn off the device with a long hold of the power button (if it reacts). If not, pull out the battery for 10 seconds (for models with a removable battery).
2. Click the combination: For most smartphones: Power + Turning up the volume. POCO F/X-series: Nutrition + Turning down the volume.

Mi Recovery

Power Off

Confirm the choice of the power button.

On Xiaomi TVs, the entrance to Recovery is different:

• 🔌 Turn off the TV from the socket.
• 🖱️ Press the Menu button on the remote (or on the case, if any).
• 🔌 Connect the power back without letting go of Menu.
• 🖼️ Hold the button until the recovery menu appears (usually 10-15 seconds).

💡

Logging into Recovery resets temporary cache data, but does not affect user files. However, on Xiaomi TVs, this method can reset network settings (Wi-Fi passwords).

Method 5: Software Disabled through Engineering Menu

For power users, there is an engineering menu disablement method that works even on partially got stuck devices, which is suitable for Xiaomi smartphones based on Qualcomm Snapdragon (for example, Redmi Note 11 Pro+, Xiaomi 12T).

Instructions:

1. Open the Phone app and enter the code:

##4636##

1. In the menu that appears, select Battery Information.
2. Click on the three dots in the top right corner and select Disable Device (or Power Off).

For devices on MediaTek (e.g., Redmi 10C, POCO M5), use the code:

##36446337##

Then, select Hardware Testing → Power → Power Off.

⚠️ Warning: On HyperOS smartphones (the new 2026 models), the engineering menu may be blocked, and trying to enter codes on such devices will lead to a network reset or even a lockdown. SIM-Before using, check the firmware version in Settings → The phone.

What do you do if nothing helps?

If none of these methods worked, your Xiaomi device may be in one of the critical states.

• 🔴 Hard Brick - complete inoperability (not enabled, not detected by PC) Requires flashing through EDL Mode (emergency mode of the loader).
• 🔄 Bootloop is a cyclical reboot on the logo, often solved by a reset via Fastboot.
• 🔋 Deep Discharge – battery discharged to 0%, need to be charged with a special device (for example, Xiaomi) ZMI PowerPack with Pre-charge function).

In these cases, it is recommended that:

1. Contact the authorized service center Xiaomi (list on the official website).
2. Use a firmware box (such as a UFi Box or EasyJTAG) if you have experience with soldering equipment.
3. Try the test point method for entering the EDL – it is important for the Redmi Note 9/10/11 models.

For Mi TVs, TV When "bricking" the only way out - flashing through USB-port with the help of the Mi proprietary software TV You can download it on the official Xiaomi website (section "Support" → Downloads → Mi TV Tools").

FAQ: Frequent questions about forced shutdown of Xiaomi