How to remove the screen lock on Xiaomi: all working methods

Locking the screen on Xiaomi smartphones is an important security feature, but sometimes it turns into a headache. PIN-code, a broken fingerprint sensor, or a randomly activated pattern lock can permanently deny access to the device. In this article, we will discuss all the current ways to disable locks on Redmi phones, POCO and Mi under control MIUI 14/15 — From standard settings to technical workarounds.

It is important to understand that some methods require prior preparation (for example, included in the program). USB-Debugging, and others will only work if you have a backup. If you're looking for a way to unlock your phone after you reset to factory settings, pay special attention to the Google bypass section. FRP — This is the most common problem for Xiaomi owners after the hard reset.

We warn you in advance: attempts to break the lock can lead to loss of data or blocking of the Mi Account. All actions you perform at your own risk. If the phone is tied to a corporate account or is on the operator’s blacklist, none of the described methods will help – you will need to contact the service center.

1. disable the lock through settings (if you know the password)

The easiest way to remove the lock is to use standard MIUI settings, which is fine if you remember your current PIN, pattern lock, or password, but want to completely disable the protection or change its type.

The instructions are relevant for all modern Xiaomi smartphones, including the Redmi Note 12/13, POCO X5/F5, Mi 11/12/13 and older devices on MIUI 12+:

1. Open the Settings app (the gear icon on the home screen).
2. Go to Passwords and Security (or Lock and Protect on some firmware).
3. Select the option Lock the screen.
4. Enter the current password/PIN/pattern lock for confirmation.
5. Press No (or Disable Lock) and confirm the action.

If you want to change the lock type (for example, from a PIN to a fingerprint) instead of completely disabling, select the desired option from the same menu and follow the instructions on the screen. Note that on some Xiaomi models, after disabling the lock, the system may require you to re-install it after 72 hours - this is a security measure from MIUI.

💡

If you don't have a "Block Screen" option in your settings, try the path: Settings → System → Additional → Security → Screen Lock. On older versions of MIUI (up to 11), the menu may be called the Lock Screen.

2. reset the lock through the Mi Account (if linked)

If you have forgotten your password but your phone is linked to your Mi Account, you can use the Remote Lock Reset feature, which only works under the following conditions:

• 📱 The phone is connected to the Internet (Wi-Fi or mobile network).
• 🔑 You have access to email/The phone number associated with the Mi Account.
• 🔄 Find Device has been activated in the settings.

Step-by-step:

1. On your computer or other phone, open account.xiaomi.com and log in.
2. Go to Find the Device (Find Device) section.
3. Select a locked smartphone from the list (if there are several).
4. Press Unlock Screen (Unlock Screen).
5. Confirm the action via SMS or email.

After that, the phone should unlock automatically within 5-10 minutes. If that doesn't happen, restart the device. Importantly, this method doesn't work, if the phone activates two-factor authentication (2FA) through Google Authenticator or another service, you will need to enter code from the application.

3. Unlock through ADB (for advanced users)

Method by using ADB (Android Debug Bridge is suitable if the phone is enabled debugging USB It's one of the most reliable ways, but it requires a lot of preparation. USB-Debugging, this section can be skipped.

What you need:

• 🖥️ Computer with Windows/macOS/Linux.
• 🔌 USB-cable (preferably original).
• 📦 Installed drivers Xiaomi and ADB Tools.

Instructions:

1. Connect the phone to your computer and confirm a trusted connection on your smartphone screen (if you receive a request).
2. Open the command prompt (cmd on Windows or Terminal on macOS/Linux) and type: adb devices If the device appears in the list, go further. If not, check the drivers and cable.
3. Enter the command to delete the file with the password: adb shell rm /data/system/gesture.key adb shell rm /data/system/password.key adb shell rm /data/system/locksettings.db shell rm /data/system/locksettings.db-wal adb shell rm /data/system/locksettings.db-shm
4. Reboot your phone: adb reboot

After the reboot, the lock should disappear. If this does not happen, try repeating the commands or check if the FRP protection is activated (we will discuss this below).

Make sure that USB-debugging is on|Download. ADB Tools from the official website|Install drivers for your Xiaomi model|Use the original. USB-cable

-->

Yes, often |Tryed 1-2 times |No, but I want to learn |No, and I don't plan |I don't know what it is-->

4. Hard Reset (reset to factory settings)

If other methods fail, the radical way is to completely reset your phone, which will remove all data from your phone, including photos, messages and apps installed, and only use this method as a last resort!

There are two options for resetting:

Reset via Recovery Mode (the most common option):

1. Turn off the phone.
2. Press the Power + Volume buttons up at the same time and hold for 10-15 seconds until the Mi logo appears.
3. In the Recovery menu, select Wipe Data (use volume buttons for navigation and power button for confirmation).
4. Confirm the reset by selecting Yes.
5. Once completed, select Reboot to reboot.

💡

After a hard reset on Xiaomi phones, FRP (Factory Reset Protection) protection often works. If you don't remember the data from the Google account that was tied to the device, the phone will remain locked!

Reset via Fastboot (for power users):

If the phone doesn’t load even in Recovery, you can try resetting via Fastboot mode:

1. Turn off the phone.
2. Press the power + volume down until the screensaver with a rabbit in the hat (Fastboot Mode).
3. Connect your phone to your computer and type in the command line: fastboot erase userdata fastboot erase cache fastboot reboot

💡

If after resetting the phone requires you to enter the old password, try to connect to Wi-Fi and log in through your Mi Account.

5. Google FRP bypass after reset

The most common problem after a hard reset on Xiaomi is the blocking of Google FRP (Factory Reset Protection), which occurs if a Google account was attached to the phone and you can't confirm it after the reset, in which case the screen will say, "This device has been reset. To continue, log in to the Google account that previously synced with this device."

FRP is not officially circumvented, as it is a security measure from Google, but there are several legitimate ways to restore access:

• 📧 Log in to the same Google account that was linked before the reset (if you remember the login / password).
• 🔑 Use a backup email or phone number to restore access to your account.
• 📱 If the phone was purchased by hand, contact the previous owner and ask them to remove the device from their Google account).

Unofficial methods of circumventing FRP (through exploits or special firmware) will not be covered – they often lead to a locking of a Google account or loss of warranty. If you do not remember the data from the account, the only safe way out is to contact the Xiaomi service center with documents confirming the purchase.

💡

Before buying a used Xiaomi phone, always check if it is linked to a Google account. ask the seller to reset with you and make sure that after the reboot the phone does not require login.

6. Alternative methods (for specific cases)

If the standard methods don't work, you can try the less obvious ones, and they're not for everyone, but they can save you in some situations.

• 🔧 Safe Mode Reset: Press the power button, hold the "Switch off" finger until you request a safe mode, sometimes the lock is temporarily disabled.
• 📞 Phone call: if the lock is a pattern lock, try calling from another device.
• 🔄 Firmware rollback: on some Xiaomi models you can flash an older version MIUI, The risky method is to get a "brick".

For Xiaomi models with a Qualcomm processor (e.g. Redmi Note 10 Pro, POCO X3 Pro), there is a method of unlocking through EDL Mode (Emergency Download Mode). It requires a special cable and Mi Flash Tool program, but is only suitable for advanced users. Without firmware skills, it is better not to take risks.

7. What NOT to do when unlocking

Attempts to bypass the locking of the screen can lead to serious consequences, and this is something that is strongly recommended not to do:

⚠️ Note: Do not use password hacking software such as Mi Account Unlock Tool or FRP Bypass APK. Most of them contain viruses or spyware, and Xiaomi can block them. IMEI Devices for attempting unauthorized access.

Other dangerous activities:

• 🚫 Install custom firmware (Custom) ROM) without unlocking the bootloader - this will lead to a blink (complete inoperability) of the phone.
• 🚫 Trying to open the phone and close contacts on the board ("hardware reset") - this will void the warranty and can damage the device.
• 🚫 Enter random passwords more than 10 times – on some models, this leads to a complete lock of the bootloader.

If you are not sure of your actions, it is better to contact the official Xiaomi service center. the cost of unlocking there usually does not exceed 1-2 thousand rubles, but you will avoid the risk of losing your phone forever.

FAQ: Frequent questions about screen locking on Xiaomi