How to turn off Safe Mode on Xiaomi TV: All working methods

Safe Mode on Xiaomi TVs (Mi TV 4/4A/4S/5/5X/Q1/Q2/P1) is a diagnostic mode that automatically activates when system failures occur. It blocks third-party applications from running, resets some settings to factory settings, and displays a notification in the bottom right corner of the screen.

Unlike smartphones, where safe mode is enabled by holding the power button, on Xiaomi TV, it is usually activated by force — without direct user intervention. This protects the system from critical errors, but also limits the functionality: Google Play, YouTube, Netflix, and some menus become unavailable. In this article, we will discuss all ways to disable the mode from basic to advanced, including solutions for cases when the remote does not respond or the screen freezes.

Why is Xiaomi TV loading in Safe Mode?

The Android TV system on Xiaomi devices is going into safe mode for several reasons, most often due to:

• 🔄 Failed firmware update – interrupted file download or installation error leads to bootloader failure.
• 📦 Application conflict – if third-party software (especially pirated software) APK) damages system files.
• 🔌 Hardware problems – power button malfunction, flash memory damage or power supply problems.
• ⚡ Power surges – abrupt power outages during operation can damage data.

Safe Mode screens usually display Safe Mode in one of the corners. If it's not available but the apps aren't running, check the firmware version in Settings → About TV. Safe Mode will show the Safe label next to the build number.

⚠️ Warning: If the TV is loaded into safe mode after each turn on, it may indicate damage to the system partition. USB-Recovery.

Method 1: Reboot via the menu (if the remote is working)

The simplest method is a software reboot, which will work if Xiaomi's remote responds to commands and the system is not getting stuck.

1. Press the Menu (or Home) button on the remote.
2. Go to Settings → Device → Reboot.
3. Confirm the action with the OK button.

After restarting, the TV should start normally. If this does not happen, try repeating the procedure 2-3 times - sometimes the system requires several cycles to recover.

Make sure the remote is in good working order (check the batteries)

Disable external devices (flash drives, hard drives)

Remember the current sound/image settings (they may reset)-->

Method 2: Forced reboot of the power button

If the remote is not working or the TV is frozen, use the hardware button. On most Xiaomi TV models, it is located:

• 📺 On Mi. TV 4A/4S — under the Mi logo on the bottom frame.
• 📺 On Mi. TV 5/Q1/P1 — side or back panel (can be covered by a plug).

Instructions:

1. Press and hold the power button for 10-15 seconds until the screen goes out.
2. Release the button and wait 30 seconds.
3. Turn on the TV with a short press.

⚠️ Note: On some models (e.g. Mi) TV Q2 75") prolonged retention of the power button may cause a reset to factory settings. If a recovery menu appears after this procedure, select Reboot system now using volume buttons and confirm the power button.

Method 3: Resetting cache through recavities (without data loss)

If simple reboots don’t work, cleaning the system applications cache can solve the problem, which does not delete user data, but requires you to enter Recovery Mode.

For the entrance to the river:

1. Turn off the TV with the power button.
2. Press and hold the Power button + Volume Down button (on the back) for 10 seconds.
3. Release the buttons when the Xiaomi logo and recovery menu appear.

On the menu, Recovery:

1. Select Wipe cache partition (use volume buttons for navigation, power button for confirmation).
2. Confirm the action by choosing Yes.
3. After cleaning, select Reboot system now.

Method 4: Reverse the firmware via USB (for power users)

If Safe Mode is introduced after a firmware update, a rollback to the previous version can help.

• 💻 Computers with Internet access.
• 🖥️ Empty. USB-accumulator (FAT32, 32GB).
• 🔧 Firmware file for your model (download only from the official Xiaomi website).

Step-by-step:

1. Download the archive with firmware (for example, mi_tv_q2_75_v2.0.123_stable.zip) and rename it in update.zip.
2. Copy the file to the root USB-storage.
3. Turn off the TV and insert the flash drive into the USB 2.0 port (usually marked as Service).
4. Press Power + Volume down and hold until the update menu appears.
5. Select Update via USB and confirm the installation.

⚠️ Warning: Continue to update the system, which can cause the TV to "brick" (completely inoperable).If the screen goes out during the installation phase, wait at least 15 minutes.

💡

Before the firmware through USB Turn off the TV from Wi-Fi and remove all the others USB-This minimizes the risk of conflict.

Method 5: Reset to factory settings (extreme case)

If none of these methods work, it's a complete reset, which will delete all the apps, accounts, and settings that you've installed, but it will bring the TV back to working order.

How to reset:

1. Go to Settings → Device → Reset settings.
2. Choose to erase all data.
3. Enter. PIN-code (if installed) or confirm the action.
4. Wait for the process to be completed (it will take 5-10 minutes).

After resetting, the TV will turn on in initial settings.

• 🌍 Connect to Wi-Fi.
• 🔑 Sign in to Google account (required to access Play Market).
• ⚙️ Set up image and sound parameters.

💡

Resetting to factory settings deletes all data, including app licenses (Netflix, Disney+).

What do you do if nothing helps?

If the TV is still loading in safe mode after all the manipulations, the problem could be hardware.

• 🔴 The screen flashes or displays artifacts.
• 🔊 No sound, but the power indicator is on.
• 🔄 The TV is cyclically rebooted.

In such cases:

1. Check the power supply - if it makes extraneous sounds (squeaking, crackling), a replacement is required.
2. Test the motherboard – swollen capacitors or oxidized contacts can cause failures.
3. Contact the service center for flash memory diagnostics (wear and tear is a common cause on models older than 3 years).

For Xiaomi TV models, repairs are free, provided that the failure is not caused by the user (for example, an unofficial firmware).

FAQ: Frequent questions about safe mode on Xiaomi TV