Accidental hitting Fastboot mode is a common situation for owners of Xiaomi, Redmi and Poco smartphones. The screen with the image of a rabbit fixing a robot often scares users, but in fact it is a regular diagnostic interface necessary for deep work with the system.
The main reason for this situation lies in the accidental clamping of the combination of volume and power keys during the turn on of the gadget. However, if the device is "stuck" in this state spontaneously, it can signal more serious problems with the software or hardware. USB-The interface will allow you to quickly bring your phone back to life without losing data.
In this article, we will discuss in detail the software methods for exiting from Fastboot mode using official software and command line. We will look at the nuances of the driver operation, possible connection errors and algorithms for actions in case standard methods do not work.
⚠️ Attention: Don't pull out USB-cable is forced during execution of program instructions, as this may lead to a break in the connection and the need to restart the communication process with the device.
Diagnosis of condition and preparation of equipment
Before you start taking action, you need to make sure that your computer correctly “sees” the connected smartphone. Fastboot mode requires specific drivers that are different from those used for normal file transfer or debugging by ADB. If Windows Device Manager displays an unknown device or device with an exclamation mark, the first task is to install the correct Android Bootloader Interface drivers.
Cable quality is critical: Cheap cables designed only for charging may not provide the stable data channel needed to shake hands between a PC and a phone. Use the original cable or certified high-speed analogue, and it is also recommended to connect the device directly to the motherboard ports, avoiding the use of the device. USB-Hubs that may not provide enough voltage.
☑️ Checking readiness to exit from Fastboot
To check the connection, open the Device Manager on your computer and connect the phone. USB» or "Portable Devices" should appear a device called the Android Bootloader Interface or Fastboot. QUSB_BULK or unknown device, you will need to manually install drivers from the composition SDK Platform Tools. Without the correct display of the device in the system, software output will not be possible.
Use of the official Mi Flash Tool utility
The easiest way for inexperienced users is to use the official Mi Flash Tool. This program was developed by Xiaomi engineers specifically for firmware and device recovery, but it also does a great job of simply withdrawing from bootloader mode.
Once you install and run the utility, connect your smartphone to your computer. Press the Refresh button in the main window of the program. If the drivers are installed correctly, your device's serial number will appear in the list. Unlike full flashing, we don't need to choose a firmware file. Just see the device in the list, which will confirm a successful connection.
Why can't the Mi Flash Tool see your phone?
To get out of mode, it is often enough to just press the Check button or any other active button in the interface that sends a service request to the device. In some versions of the software, there is a Stop or Exit button that forcibly terminates the communication session and restarts the phone to normal mode. This is a safe method, since it does not change the memory partitions, but only interrupts the wait for commands.
Exit via command line and ADB Fastboot
For those who prefer complete control of the process or do not have heavy graphics utilities at hand, the ideal solution is to use the Windows command line. This method requires unpacking the Platform Tools archive, which contains executable files adb.exe and fastboot.exe. Working through the console allows you to see the status of execution of commands and error codes.
Open the tool folder, press the Shift key, and right-click on the empty space, selecting "Open PowerShell window here" or "Open in terminal." Enter fastboot devices. If you get the serial number of the device, the connection is established and you can proceed to the reboot command.
fastboot rebootEnter the command above and press Enter. The smartphone should restart immediately. If the command does not execute and the console is "hanging", check whether the device does not require on-screen confirmation (although in Fastboot mode this is rare) or whether the connection is blocked by antivirus.
Alternative methods and third-party software
If standard tools don't work, you can turn to trusted third-party solutions. Utilities like XiaomiTool V2 provide advanced functionality for working with brand devices. They often know how to automatically determine the status of the phone and offer a "Reboot" or "Exit Fastboot" button in a convenient graphical interface, eliminating the need to enter commands manually.
Another powerful tool is the universal ADB AppControl program, or similar managers, which allow you to send reboot signals even when the standard fastboot is silent, but it is worth remembering that using third-party software always carries minimal risks, so download programs only from official developers' sites.
There is also a method of "soft reset" through the power supply. If the phone freezes and does not respond to program commands, try connecting it to a charger with a current less than 1 Amp (for example, an old charger from a button phone or a phone). USB-Some Xiaomi models, when low-current charging is detected in Fastboot mode, can automatically initiate a reboot, perceiving this as a signal of the end of the diagnostics.
⚠️ Note: Using unverified scripts from the Internet to exit Fastboot can lead to bootloader blocking or data loss, use only known tools.
Table of errors and ways of their solution
Users often encounter various errors when pulling a device out of bootloader mode. Understanding their nature helps to quickly resolve the problem. Below is a table with the most frequent error codes and situations that occur when working with Fastboot on Xiaomi devices.
| Code/Situation | Description of the problem | Decision-making |
|---|---|---|
| waiting for device | The computer can't see the phone in Fastboot mode | Replace USB-cable, reinstall drivers |
| FAILED (remote: device is locked) | Attempt to write to a blocked section | For the reboot command is not relevant, check the command |
| Device in the list of "Unknown" | There are no Android Bootloader drivers | Manually update the driver through the Device Manager |
| The command is executed, but the phone does not respond. | Freezing of the power controller or software | Press the power button for 15-20 seconds |
If you see a FAILED error, carefully check the syntax of the command you entered. Often users accidentally enter extra spaces or use commands for Recovery mode in Fastboot mode. The fastboot reboot command works on 99% of devices regardless of the bootloader's unlock status.
💡
If the Device Manager shows a device with an error code 43, try turning off all the unnecessary devices. USB-Devices and restarts the computer, this often frees up the controller's resources.
Hardware discharge and emergency measures
In cases where software methods through the PC are powerless (for example, when the system files of the bootloader are damaged), the hardware method remains: it consists in long-term retention of the power button. This method simulates battery extraction and is universal for all modern Xiaomi smartphones.
Press the power button and hold it for 10 to 20 seconds. At some point, the screen will go out and the device will vibrate, and then the Mi or Redmi logo will appear. If you fail the first time, repeat the procedure, but at the moment of vibration release the power button and immediately press the volume button to try to get into Recovery, or just wait for the system to boot.
Sometimes the combination of power and volume buttons helps, press the power button and the volume button (or decrease, depending on the model) for 15 seconds at the same time, this forcefully resets the power controller. It is important not to be afraid to "override" the buttons - modern power controllers are protected from such actions.
💡
Hardware power button reboot is the most reliable way to exit Fastboot if the software methods through the PC don’t work, as it works at iron level.